[U-Boot] [PATCH 1/4] arm: dts: h6: move MMC pinctrl to soc

[Clément Péron]

There is only one muxing avalaible for each MMC controller.

Move this pinmux to the SOC dtsi.

Signed-off-by: Clément Péron <peron.c...@gmail.com>
---
 arch/arm/dts/sun50i-h6-orangepi.dtsi | 2 --
 arch/arm/dts/sun50i-h6-pine-h64.dts  | 4 ----
 arch/arm/dts/sun50i-h6.dtsi          | 4 ++++
 3 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi 
b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index 0612c19cd9..3748dcaa70 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -24,8 +24,6 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        bus-width = <4>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts 
b/arch/arm/dts/sun50i-h6-pine-h64.dts
index ceffc40810..a26314c084 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -42,16 +42,12 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
 
 &mmc2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc2_pins>;
        vmmc-supply = <&reg_cldo1>;
        vqmmc-supply = <&reg_bldo2>;
        non-removable;
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index cfa5fffcf6..617cea35d1 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -158,6 +158,8 @@
                        resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -186,6 +188,8 @@
                        resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc2_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot