Re: [U-Boot] [PATCH 16/16] SPI: EXYNOS: Add FDT support to driver.
Hi Minkyu Kang, Thank you for comments.Will correct them. On Wed, Dec 26, 2012 at 5:24 PM, Minkyu Kang mk7.k...@samsung.com wrote: Dear Rajeshwari Shinde, On 14/12/12 20:56, Rajeshwari Shinde wrote: This patch adds FDT support to the SPI driver. Signed-off-by: Simon Glass s...@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com Acked-by: Simon Glass s...@chromium.org --- Changes in V1: -Rebased on latest u-boot-samsung drivers/spi/exynos_spi.c | 96 +++--- 1 files changed, 90 insertions(+), 6 deletions(-) diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c index 3e6c18f..7ecc566 100644 --- a/drivers/spi/exynos_spi.c +++ b/drivers/spi/exynos_spi.c @@ -20,6 +20,7 @@ #include common.h #include malloc.h #include spi.h +#include fdtdec.h #include asm/arch/clk.h #include asm/arch/clock.h #include asm/arch/cpu.h @@ -28,16 +29,20 @@ #include asm/arch-exynos/spi.h #include asm/io.h +DECLARE_GLOBAL_DATA_PTR; + /* Information about each SPI controller */ struct spi_bus { enum periph_id periph_id; s32 frequency; /* Default clock frequency, -1 for none */ struct exynos_spi *regs; int inited; /* 1 if this bus is ready for use */ + int node; }; /* A list of spi buses that we know about */ static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS]; +static unsigned int bus_count; struct exynos_spi_slave { struct spi_slave slave; @@ -50,7 +55,7 @@ struct exynos_spi_slave { static struct spi_bus *spi_get_bus(unsigned dev_index) { - if (dev_index EXYNOS5_SPI_NUM_CONTROLLERS) + if (dev_index bus_count) return spi_bus[dev_index]; debug(%s: invalid bus %d, __func__, dev_index); @@ -347,21 +352,100 @@ static inline struct exynos_spi *get_spi_base(int dev_index) (dev_index - 3); } +/* + * Read the SPI config from the device tree node. + * + * @param blob FDT blob to read from + * @param node Node offset to read from + * @param bus SPI bus structure to fill with information + * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing + */ +static int spi_get_config(const void *blob, int node, struct spi_bus *bus) +{ + bus-node = node; + bus-regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, reg); + bus-periph_id = pinmux_decode_periph_id(blob, node); Please add blank line here. + if (bus-periph_id == PERIPH_ID_NONE) { + debug(%s: Invalid peripheral ID %d\n, __func__, + bus-periph_id); + return -FDT_ERR_NOTFOUND; + } + + /* Use 500KHz as a suitable default */ + bus-frequency = fdtdec_get_int(blob, node, spi-max-frequency, + 50); + + return 0; +} + Please remove this blank line. + +/* + * Process a list of nodes, adding them to our list of SPI ports. + * + * @param blob fdt blob + * @param node_list list of nodes to process (any =0 are ignored) + * @param count number of nodes to process + * @param is_dvc1 if these are DVC ports, 0 if standard I2C + * @return 0 if ok, -1 on error + */ +static int process_nodes(const void *blob, int node_list[], int count) +{ + int i; + + /* build the i2c_controllers[] for each controller */ + for (i = 0; i count; i++) { + int node = node_list[i]; + struct spi_bus *bus; + + if (node = 0) + continue; + + bus = spi_bus[i]; + if (spi_get_config(blob, node, bus)) { + printf(exynos spi_init: failed to decode bus %d\n, + i); + return -1; + } + + debug(spi: controller bus %d at %p, periph_id %d\n, + i, bus-regs, bus-periph_id); + bus-inited = 1; + bus_count++; + } + + return 0; +} + /* Sadly there is no error return from this function */ void spi_init(void) { - int i; + int count; + +#ifdef CONFIG_OF_CONTROL + int node_list[EXYNOS5_SPI_NUM_CONTROLLERS]; + const void *blob = gd-fdt_blob; + + count = fdtdec_find_aliases_for_id(blob, spi, + COMPAT_SAMSUNG_EXYNOS_SPI, node_list, + EXYNOS5_SPI_NUM_CONTROLLERS); + if (process_nodes(blob, node_list, count)) + return; + +#else struct spi_bus *bus; - for (i = 0; i EXYNOS5_SPI_NUM_CONTROLLERS; i++) { - bus = spi_bus[i]; - bus-regs = get_spi_base(i); - bus-periph_id = PERIPH_ID_SPI0 + i; + for (count = 0; i
[U-Boot] [PATCH 16/16] SPI: EXYNOS: Add FDT support to driver.
This patch adds FDT support to the SPI driver. Signed-off-by: Simon Glass s...@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com Acked-by: Simon Glass s...@chromium.org --- Changes in V1: -Rebased on latest u-boot-samsung drivers/spi/exynos_spi.c | 96 +++--- 1 files changed, 90 insertions(+), 6 deletions(-) diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c index 3e6c18f..7ecc566 100644 --- a/drivers/spi/exynos_spi.c +++ b/drivers/spi/exynos_spi.c @@ -20,6 +20,7 @@ #include common.h #include malloc.h #include spi.h +#include fdtdec.h #include asm/arch/clk.h #include asm/arch/clock.h #include asm/arch/cpu.h @@ -28,16 +29,20 @@ #include asm/arch-exynos/spi.h #include asm/io.h +DECLARE_GLOBAL_DATA_PTR; + /* Information about each SPI controller */ struct spi_bus { enum periph_id periph_id; s32 frequency; /* Default clock frequency, -1 for none */ struct exynos_spi *regs; int inited; /* 1 if this bus is ready for use */ + int node; }; /* A list of spi buses that we know about */ static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS]; +static unsigned int bus_count; struct exynos_spi_slave { struct spi_slave slave; @@ -50,7 +55,7 @@ struct exynos_spi_slave { static struct spi_bus *spi_get_bus(unsigned dev_index) { - if (dev_index EXYNOS5_SPI_NUM_CONTROLLERS) + if (dev_index bus_count) return spi_bus[dev_index]; debug(%s: invalid bus %d, __func__, dev_index); @@ -347,21 +352,100 @@ static inline struct exynos_spi *get_spi_base(int dev_index) (dev_index - 3); } +/* + * Read the SPI config from the device tree node. + * + * @param blob FDT blob to read from + * @param node Node offset to read from + * @param bus SPI bus structure to fill with information + * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing + */ +static int spi_get_config(const void *blob, int node, struct spi_bus *bus) +{ + bus-node = node; + bus-regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, reg); + bus-periph_id = pinmux_decode_periph_id(blob, node); + if (bus-periph_id == PERIPH_ID_NONE) { + debug(%s: Invalid peripheral ID %d\n, __func__, + bus-periph_id); + return -FDT_ERR_NOTFOUND; + } + + /* Use 500KHz as a suitable default */ + bus-frequency = fdtdec_get_int(blob, node, spi-max-frequency, + 50); + + return 0; +} + + +/* + * Process a list of nodes, adding them to our list of SPI ports. + * + * @param blob fdt blob + * @param node_list list of nodes to process (any =0 are ignored) + * @param count number of nodes to process + * @param is_dvc1 if these are DVC ports, 0 if standard I2C + * @return 0 if ok, -1 on error + */ +static int process_nodes(const void *blob, int node_list[], int count) +{ + int i; + + /* build the i2c_controllers[] for each controller */ + for (i = 0; i count; i++) { + int node = node_list[i]; + struct spi_bus *bus; + + if (node = 0) + continue; + + bus = spi_bus[i]; + if (spi_get_config(blob, node, bus)) { + printf(exynos spi_init: failed to decode bus %d\n, + i); + return -1; + } + + debug(spi: controller bus %d at %p, periph_id %d\n, + i, bus-regs, bus-periph_id); + bus-inited = 1; + bus_count++; + } + + return 0; +} + /* Sadly there is no error return from this function */ void spi_init(void) { - int i; + int count; + +#ifdef CONFIG_OF_CONTROL + int node_list[EXYNOS5_SPI_NUM_CONTROLLERS]; + const void *blob = gd-fdt_blob; + + count = fdtdec_find_aliases_for_id(blob, spi, + COMPAT_SAMSUNG_EXYNOS_SPI, node_list, + EXYNOS5_SPI_NUM_CONTROLLERS); + if (process_nodes(blob, node_list, count)) + return; + +#else struct spi_bus *bus; - for (i = 0; i EXYNOS5_SPI_NUM_CONTROLLERS; i++) { - bus = spi_bus[i]; - bus-regs = get_spi_base(i); - bus-periph_id = PERIPH_ID_SPI0 + i; + for (count = 0; i EXYNOS5_SPI_NUM_CONTROLLERS; i++) { + bus = spi_bus[count]; + bus-regs = get_spi_base(count); + bus-periph_id = PERIPH_ID_SPI0 + count; /* Although Exynos5 supports upto 50Mhz speed, * we are setting it to 10Mhz for safe side */ bus-frequency = 1000; bus-inited = 1; + bus-node = 0; + bus_count =