On Thu, Sep 15, 2016 at 5:48 PM, Jagan Teki wrote:
> OK, and I ran imx6 ddr calibration stress test[1] but observed data
> abort. the objdump doesn't show any of these address, can you please
> help me how can I proceed further?
>
> icorem6qdl> fatload mmc 0:1 0x1000 ddr-stress-test-mx6dq.bin
Hi Fabio,
On Wed, Sep 14, 2016 at 1:13 AM, Fabio Estevam wrote:
> Hi Jagan,
>
> On Tue, Sep 13, 2016 at 4:11 PM, Jagan Teki wrote:
>
> +int dram_init(void)
> +{
> + gd->ram_size = imx_ddr_size();
>>
>> Is this common call for all imx soc's to get the ddr size? because I
>> obse
Hi Jagan,
On Wed, Sep 14, 2016 at 12:41:17AM +0530, Jagan Teki wrote:
>Hi Peng,
>
>On Thu, Sep 8, 2016 at 7:05 AM, Peng Fan wrote:
>> Hi Jagan,
>> On Wed, Sep 07, 2016 at 08:21:07PM +0530, Jagan Teki wrote:
>>>On Thu, Aug 11, 2016 at 11:32 AM, Peng Fan wrote:
Add i.MX6ULL EVK board support:
Hi Jagan,
On Tue, Sep 13, 2016 at 4:11 PM, Jagan Teki wrote:
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
>
> Is this common call for all imx soc's to get the ddr size? because I
> observed incorrect size when I call this function.
Yes, if you get incorrect size
Hi Peng,
On Thu, Sep 8, 2016 at 7:05 AM, Peng Fan wrote:
> Hi Jagan,
> On Wed, Sep 07, 2016 at 08:21:07PM +0530, Jagan Teki wrote:
>>On Thu, Aug 11, 2016 at 11:32 AM, Peng Fan wrote:
>>> Add i.MX6ULL EVK board support:
>>> Add device tree file, which is copied from NXP Linux.
>>> Enabled DM_MMC,
Hi Jagan,
On Wed, Sep 07, 2016 at 08:21:07PM +0530, Jagan Teki wrote:
>On Thu, Aug 11, 2016 at 11:32 AM, Peng Fan wrote:
>> Add i.MX6ULL EVK board support:
>> Add device tree file, which is copied from NXP Linux.
>> Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
>> The uart iomux
On Thu, Aug 11, 2016 at 11:32 AM, Peng Fan wrote:
> Add i.MX6ULL EVK board support:
> Add device tree file, which is copied from NXP Linux.
> Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
> The uart iomux settings are still keeped in board file.
>
> Boot Log:
> U-Boot 2016.09-rc1
Add i.MX6ULL EVK board support:
Add device tree file, which is copied from NXP Linux.
Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
The uart iomux settings are still keeped in board file.
Boot Log:
U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800)
CPU: Fre
8 matches
Mail list logo