[U-Boot] [PATCH 3/3] spi: zynq_qspi: Fix to configure CPOL, CPHA mask

[Jagan Teki]

priv->mode is initialized when .set_speed triggers
with mode value, so checking mode for configuring
CPOL, CPHA using priv->mode is invalid hence use
mode from .set_speed argument, and at the end
priv->mode will initialized with mode.

This patch also replaces formatting string to use
speed instead of mode in .set_speed ops.

Signed-off-by: Jagan Teki <jt...@openedev.com>
---
 drivers/spi/zynq_qspi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c
index 0ce6127..8aa61d7 100644
--- a/drivers/spi/zynq_qspi.c
+++ b/drivers/spi/zynq_qspi.c
@@ -569,7 +569,8 @@ static int zynq_qspi_set_speed(struct udevice *bus, uint 
speed)
        writel(confr, &regs->cr);
        priv->freq = speed;
 
-       debug("zynq_spi_set_speed: regs=%p, mode=%d\n", priv->regs, priv->freq);
+       debug("zynq_spi_set_speed: regs=%p, speed=%d\n",
+             priv->regs, priv->freq);
 
        return 0;
 }
@@ -584,9 +585,9 @@ static int zynq_qspi_set_mode(struct udevice *bus, uint 
mode)
        confr = readl(&regs->cr);
        confr &= ~(ZYNQ_QSPI_CR_CPHA_MASK | ZYNQ_QSPI_CR_CPOL_MASK);
 
-       if (priv->mode & SPI_CPHA)
+       if (mode & SPI_CPHA)
                confr |= ZYNQ_QSPI_CR_CPHA_MASK;
-       if (priv->mode & SPI_CPOL)
+       if (mode & SPI_CPOL)
                confr |= ZYNQ_QSPI_CR_CPOL_MASK;
 
        writel(confr, &regs->cr);
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot