From: Jagan Teki <ja...@amarulasolutions.com>
Add OF_CONTROL support for SPL code.
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
arch/arm/dts/imx6qdl-icore-rqs.dtsi | 2 +
arch/arm/dts/imx6qdl-icore.dtsi | 2 +
arch/arm/dts/imx6qdl.dtsi | 5 ++
arch/arm/mach-imx/mx6/Kconfig | 8 +++
board/engicam/icorem6/icorem6.c | 75 -----------------------
board/engicam/icorem6_rqs/icorem6_rqs.c | 102 --------------------------------
configs/imx6qdl_icore_mmc_defconfig | 1 +
configs/imx6qdl_icore_rqs_defconfig | 1 +
include/configs/imx6-engicam.h | 22 +++----
9 files changed, 31 insertions(+), 187 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
index 8b9d5b4..65cbf5a 100644
--- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi
@@ -100,6 +100,7 @@
};
&usdhc3 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -165,6 +166,7 @@
};
pinctrl_usdhc3: usdhc3grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070
diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi
index a485c3e..06d9bc3 100644
--- a/arch/arm/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/dts/imx6qdl-icore.dtsi
@@ -118,6 +118,7 @@
};
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -208,6 +209,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index b13b0b2..e04b570 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -77,6 +77,7 @@
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
+ u-boot,dm-spl;
dma_apbh: dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
@@ -225,6 +226,7 @@
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
+ u-boot,dm-spl;
spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
@@ -516,6 +518,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ u-boot,dm-spl;
};
gpio2: gpio@020a0000 {
@@ -805,6 +808,7 @@
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6dl-iomuxc",
"fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+ u-boot,dm-spl;
};
ldb: ldb@020e0008 {
@@ -889,6 +893,7 @@
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
+ u-boot,dm-spl;
crypto: caam@2100000 {
compatible = "fsl,sec-v4.0";
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 540f2b2..9f2b30c 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -198,6 +198,10 @@ config TARGET_MX6Q_ICORE
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6Q_ICORE_RQS
bool "Support Engicam i.Core RQS"
@@ -213,6 +217,10 @@ config TARGET_MX6Q_ICORE_RQS
select DM_THERMAL
select SUPPORT_SPL
select SPL_LOAD_FIT
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index e173124..a967ccd 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -7,7 +7,6 @@
*/
#include <common.h>
-#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
@@ -191,77 +190,3 @@ void setup_display(void)
writel(reg, &iomux->gpr[3]);
}
#endif /* CONFIG_VIDEO_IPUV3 */
-
-#ifdef CONFIG_SPL_BUILD
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */
-};
-
-#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC1_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC1_BASE_ADDR:
- ret = !gpio_get_value(USDHC1_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC1
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc1_pads);
- gpio_direction_input(USDHC1_CD_GPIO);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c
b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 599cea3..c0a6d4f 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -6,21 +6,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <linux/sizes.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/iomux-v3.h>
-
-#include "../common/board.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -35,93 +21,6 @@ int board_mmc_get_env_dev(int devno)
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
-/* MMC board initialization is needed till adding DM support in SPL */
-#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
-#include <mmc.h>
-#include <fsl_esdhc.h>
-
-#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC3_BASE_ADDR, 1, 4},
- {USDHC4_BASE_ADDR, 1, 8},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC3_BASE_ADDR:
- case USDHC4_BASE_ADDR:
- ret = 1;
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int i, ret;
-
- /*
- * According to the board_mmc_init() the following map is done:
- * (U-boot device node) (Physical Port)
- * mmc0 USDHC3
- * mmc1 USDHC4
- */
- for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
- switch (i) {
- case 0:
- SETUP_IOMUX_PADS(usdhc3_pads);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 1:
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
- default:
- printf("Warning - USDHC%d controller not supporting\n",
- i + 1);
- return 0;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (ret) {
- printf("Warning: failed to initialize mmc dev %d\n", i);
- return ret;
- }
- }
-
- return 0;
-}
-
#ifdef CONFIG_ENV_IS_IN_MMC
void board_boot_order(u32 *spl_boot_list)
{
@@ -147,5 +46,4 @@ void board_boot_order(u32 *spl_boot_list)
spl_boot_list[0] = boot_dev;
}
#endif
-#endif
#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/imx6qdl_icore_mmc_defconfig
b/configs/imx6qdl_icore_mmc_defconfig
index 1b001df..221866a 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -49,3 +49,4 @@ CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/imx6qdl_icore_rqs_defconfig
b/configs/imx6qdl_icore_rqs_defconfig
index a57a992..e6b4dff 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -41,3 +41,4 @@ CONFIG_FEC_MXC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_MXC_UART=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index c34dc30..ddbd6dd 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -219,16 +219,18 @@
# include "imx6_spl.h"
# ifdef CONFIG_SPL_BUILD
-# if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) ||
defined(CONFIG_TARGET_MX6UL_ISIOT)
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# else
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# endif
-
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
+# if defined(CONFIG_IMX6UL)
+# if defined(CONFIG_TARGET_MX6UL_ISIOT)
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# else
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# endif
+
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
+# undef CONFIG_DM_GPIO
+# undef CONFIG_DM_MMC
+# endif /* CONFIG_IMX6UL */
+# endif /* CONFIG_SPL_BUILD */
#endif
#endif /* __IMX6_ENGICAM_CONFIG_H */
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
