From: York Sun <york...@freescale.com>
JEDEC spec allows DRAM vendors to use prime DQ for write leveling. This
is not an issue unless some DQ pins are not connected. If a platform uses
regular DIMMs but with reduced DDR ECC pins, the prime DQ may end up on
those floating pins for the second rank. The workaround is to use a known
good chip select for this purpose.
Signed-off-by: York Sun <york...@freescale.com>
---
Change log:
v3: No change.
v2: No change.
drivers/ddr/fsl/ctrl_regs.c | 3 +++
drivers/ddr/fsl/interactive.c | 2 ++
include/fsl_ddr_sdram.h | 2 ++
3 files changed, 7 insertions(+)
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 5e0ee77..d9cac22 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -2276,6 +2276,9 @@ compute_fsl_memctl_config_regs(const memctl_options_t
*popts,
if (ip_rev > 0x40400)
unq_mrs_en = 1;
+ if (ip_rev > 0x40700)
+ ddr->debug[18] = popts->cswl_override;
+
set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en);
set_ddr_sdram_mode(ddr, popts, common_dimm,
cas_latency, additive_latency, unq_mrs_en);
diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c
index 7fb4187..6aa16b2 100644
--- a/drivers/ddr/fsl/interactive.c
+++ b/drivers/ddr/fsl/interactive.c
@@ -511,6 +511,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
CTRL_OPTIONS(wrlvl_override),
CTRL_OPTIONS(wrlvl_sample),
CTRL_OPTIONS(wrlvl_start),
+ CTRL_OPTIONS(cswl_override),
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
@@ -801,6 +802,7 @@ static void print_memctl_options(const memctl_options_t
*popts)
CTRL_OPTIONS(wrlvl_override),
CTRL_OPTIONS(wrlvl_sample),
CTRL_OPTIONS(wrlvl_start),
+ CTRL_OPTIONS_HEX(cswl_override),
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index e8a2db9..987119b 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -281,6 +281,7 @@ typedef struct memctl_options_partial_s {
#define DDR_DATA_BUS_WIDTH_64 0
#define DDR_DATA_BUS_WIDTH_32 1
#define DDR_DATA_BUS_WIDTH_16 2
+#define DDR_CSWL_CS0 0x04000001
/*
* Generalized parameters for memory controller configuration,
* might be a little specific to the FSL memory controller
@@ -340,6 +341,7 @@ typedef struct memctl_options_s {
unsigned int cpo_override;
unsigned int write_data_delay; /* DQS adjust */
+ unsigned int cswl_override;
unsigned int wrlvl_override;
unsigned int wrlvl_sample; /* Write leveling */
unsigned int wrlvl_start;
--
1.8.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
