Enable AHB support for Flexspi controller interface meaning
memory can be accessed via md command using absolute addresses
Signed-off-by: Yogesh Gaur <yogeshnarayan.g...@nxp.com>
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
Signed-off-by: Rajat Srivastava <rajat.srivast...@nxp.com>
---
v4:
- Remove unnecessary dependencies of FSPI_AHB_EN_4BYTE config
- Enable this config by default
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 9 ++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 44 +++++++++++++++++++
.../arm/include/asm/arch-fsl-layerscape/soc.h | 7 +++
3 files changed, 60 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f48481f465..5151308f96 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -374,6 +374,15 @@ config QSPI_AHB_INIT
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config FSPI_AHB_EN_4BYTE
+ bool "Enable 4-byte Fast Read command for AHB mode"
+ default y
+ help
+ The default setting for FlexSPI AHB bus just supports 3-byte
addressing.
+ But some FlexSPI flash sizes are up to 64MBytes.
+ This flag enables fast read command for AHB mode and modifies required
+ LUT to support full FlexSPI flash.
+
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 06f3edb302..a38f3ebb47 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -644,6 +644,47 @@ void fsl_lsch2_early_init_f(void)
}
#endif
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+int fspi_ahb_init(void)
+{
+ /* Enable 4bytes address support and fast read */
+ u32 *fspi_lut, lut_key, *fspi_key;
+
+ fspi_key = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUTKEY_BASE_ADDR;
+ fspi_lut = (void *)SYS_NXP_FSPI_ADDR + SYS_NXP_FSPI_LUT_BASE_ADDR;
+
+ lut_key = in_be32(fspi_key);
+
+ if (lut_key == SYS_NXP_FSPI_LUTKEY) {
+ /* That means the register is BE */
+ out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ /* Unlock the lut table */
+ out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK);
+ /* Create READ LUT */
+ out_be32(fspi_lut, 0x0820040c);
+ out_be32(fspi_lut + 1, 0x24003008);
+ out_be32(fspi_lut + 2, 0x00000000);
+ /* Lock the lut table */
+ out_be32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ out_be32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK);
+ } else {
+ /* That means the register is LE */
+ out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ /* Unlock the lut table */
+ out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_UNLOCK);
+ /* Create READ LUT */
+ out_le32(fspi_lut, 0x0820040c);
+ out_le32(fspi_lut + 1, 0x24003008);
+ out_le32(fspi_lut + 2, 0x00000000);
+ /* Lock the lut table */
+ out_le32(fspi_key, SYS_NXP_FSPI_LUTKEY);
+ out_le32(fspi_key + 1, SYS_NXP_FSPI_LUTCR_LOCK);
+ }
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_QSPI_AHB_INIT
/* Enable 4bytes address support and fast read */
int qspi_ahb_init(void)
@@ -827,6 +868,9 @@ int board_late_init(void)
#ifdef CONFIG_QSPI_AHB_INIT
qspi_ahb_init();
#endif
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+ fspi_ahb_init();
+#endif
return 0;
}
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 7d95c4e2f5..a09d382112 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -133,6 +133,13 @@ void init_pfe_scfg_dcfg_regs(void);
int qspi_ahb_init(void);
#endif
+#ifdef CONFIG_FSPI_AHB_EN_4BYTE
+#define SYS_NXP_FSPI_LUTCR_LOCK 0x00000001
+#define SYS_NXP_FSPI_LUTCR_UNLOCK 0x00000002
+#define SYS_NXP_FSPI_LUTKEY 0x5AF05AF0
+int fspi_ahb_init(void);
+#endif
+
void cpu_name(char *name);
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
void erratum_a009635(void);
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
