Hello,
I'm trying to debug U-Boot (version: imx_v2014.04_3.14.28_1.0.0_ga) for
a custom board with a BDI3000.
So far I can connect to the target and I see the U-Boot code at the
correct location, but after reset the PC is at 0x1ffa870c which is
somewhere outside of U-Boot. Here the state
Hi
In reply to this, can anyone please suggest me, how to debug the
fw_printenv code in u-boot?
I am using buildroot-2014.02, which used uboot-tools-2014.01. But I am
having few custom changes in uboot-2010.03, those I want to use, in
tools-2014.01 I can see as of now, the code fails on
Hi all, could someone write briefly the steps needed to debug u-boot with
BDI2000? I can-t find documentation about it. On-line docs specify only how to
proceed with gdb after that the host bdi is up and configured.
Thank you all!
Mirko
--
Mirko Banchi
e-mail:mk.ban...@gmail.com
On 08/30/2011 01:59 PM, Mirko Banchi wrote:
Hi all, could someone write briefly the steps needed to debug u-boot
with BDI2000? I can-t find documentation about it. On-line docs
specify only how to proceed with gdb after that the host bdi is up
and configured.
To set up the BDI2000 please refer to the Abatron manual.
This was the missing step :)
Thank you Stefano!
Mirko
--
Mirko Banchi
e-mail:mk.ban...@gmail.com
id-jabber: mk.ban...@jabber.org
PGP key fingerprint:
308F BFB1 4E67 2522 C88E
DC69 7631 52ED 32A5 6456
Dear Mirko Banchi,
In message 659acfbd-2b5d-4f28-89bf-5473d90ad...@gmail.com you wrote:
Hi all, could someone write briefly the steps needed to debug u-boot with
BDI2000? I can-t find documentation about it. On-line docs specify only how
to proceed with gdb after that the host bdi is up and
Il giorno 30/ago/2011, alle ore 14.55, Wolfgang Denk ha scritto:
Dear Mirko Banchi,
In message 659acfbd-2b5d-4f28-89bf-5473d90ad...@gmail.com you wrote:
Hi all, could someone write briefly the steps needed to debug u-boot with
BDI2000? I can-t find documentation about it. On-line docs
Dear Mirko Banchi,
In message 857d4443-39b6-43b0-b269-bb6ce7c9a...@gmail.com you wrote:
Could you please explain which information you consider missing in
these sections of the manual?
10.1. Debugging of U-Boot
10.1.1. Debugging of U-Boot Before Relocation
10.1.2.
Dear Alan Carvalho de Assis,
In message aanlktik4fypdak9bhvkzrndmvuyccg-xdabqtkqyz...@mail.gmail.com you
wrote:
Hi Mark,
On 5/27/10, Mark Fanara mark.fan...@gmail.com wrote:
...
2) I am using a bdi3000. Is there no way to build u-boot so that it is
directly loaded to RAM by the
Dear Wolfgang Denk,
Yes, it is true.
Currently only for ARMs and i386.
Best Regards,
Alan
On 5/27/10, Wolfgang Denk w...@denx.de wrote:
Dear Alan Carvalho de Assis,
In message aanlktik4fypdak9bhvkzrndmvuyccg-xdabqtkqyz...@mail.gmail.com
you wrote:
Hi Mark,
On 5/27/10, Mark Fanara
As my target board is PowerPC based (and therefore skipping relocation
is not possible), I need help with my previously enumerated questions.
1) In section 10.4, Tips and Tricks, it says To prevent GDB from
jumping around in the code when trying to single step, i. e. when it
seems as if the code
Dear Mark Fanara,
In message aanlktina8o1otqi93hyazu2udg4qbzzrkt3ql3ip9...@mail.gmail.com you
wrote:
As my target board is PowerPC based (and therefore skipping relocation
is not possible), I need help with my previously enumerated questions.
1) In section 10.4, Tips and Tricks, it says To
I have read section 10 of the manual which describes debugging u-boot
and have further questions.
1) In section 10.4, Tips and Tricks, it says To prevent GDB from
jumping around in the code when trying to single step, i. e. when it
seems as if the code is not executing line by line, you can
Hi Mark,
On 5/27/10, Mark Fanara mark.fan...@gmail.com wrote:
...
2) I am using a bdi3000. Is there no way to build u-boot so that it is
directly loaded to RAM by the debugger and does not relocate itself?
#define CONFIG_SKIP_RELOCATE_UBOOT
BRs,
Alan
Hello,
I am trying to debug the u-boot with help of gdb + eclipse. Useing the
phy3250_config.
The problem is that when debugging, the listed source code seems to be out of
sync.
The debugger pointer in the source code, seems not to point to the correct
source code.
The assembler windows shows
Dear =?iso-8859-1?Q?Bj=F8rnar_Syverstad?=,
In message 3f466ddf09a55d46858fc39b22de56f23a30259...@pat.prediktor.no you
wrote:
I am trying to debug the u-boot with help of gdb + eclipse. Useing the
phy3250_config.
The problem is that when debugging, the listed source code seems to be out of
Dear Dunda, Matthias,
In message
569685f045b85741820d0265e0d2999d019cf...@tddhh01.hh.thales-naval.de you wrote:
Then, I calculate the RAM address for the symbols as described in
DULG-10.1.2.:
RAM is 512 MB -- 0x2000
Monitor Len according to board specific file is 256k -- 0x0004
Hi again,
following up on my other message, I split them up into seperate messages, as
I think there are different reasons.
When I start the target from the BDI shell with RESET RUN and wait until
the Hit any key to stop autoboot message appears, I can then attach to the
target :
Remote
Hi,
I'm having trouble debugging U-Boot (version 2008.10) with a BDI2000 on
an Embedded Planet EP8248 board (MPC8248 processor). According to
Embedded Linux Primer by Christopher Hanin, early U-Boot debugging
must be done using hardware breakpoints, because it is running out of
flash at that
Hello,
I have a board with MPC852T, SDRAM and FLASH.
I have been successful to get the console up and debug the FLASH and SDRAM
connections.
Now the SDRAM passes all the memory tests in SLOW mode also.
The current problem I am facing is that relocate_code is being called from
the lib_ppc/board.c
20 matches
Mail list logo
