Hi Kever,
On Tue, 2019-08-20 at 10:46 +0800, Kever Yang wrote:
> Hi Kurt,
>
>
> Does this patch fix your issue?
>
> https://patchwork.ozlabs.org/patch/1147457/
>
Yes! It fixes my boot issue. Thank you for working on it.
However there is a second issue. Only 2G of memory was recognized
instea
Hi Kurt,
Does this patch fix your issue?
https://patchwork.ozlabs.org/patch/1147457/
Thanks,
- Kever
On 2019/8/20 上午7:32, Kurt Miller wrote:
Hi Jagan,
On Mon, 2019-08-19 at 23:26 +0530, Jagan Teki wrote:
Is your board running at 50MHz? (look like No).
No it is running at 800Mhz or 856MH
Hi Jagan,
On Mon, 2019-08-19 at 23:26 +0530, Jagan Teki wrote:
> Is your board running at 50MHz? (look like No).
No it is running at 800Mhz or 856MHz (see rkbin TPL output below).
> As I said please
> explore step-by-step
> 00: First boot the board rkbin => SPL => U-Boot proper
This step was co
On Mon, 2019-08-19 at 22:08 +0530, Jagan Teki wrote:
> On Mon, Aug 19, 2019 at 7:33 PM Kurt Miller
> wrote:
> >
> >
> > On Mon, 2019-08-19 at 15:31 +0200, Mark Kettenis wrote:
> > >
> > > >
> > > >
> > > > From: Jagan Teki
> > > > Date: Mon, 19 Aug 2019 00:21:40 +0530
> > > >
> > > > + Kev
On Mon, Aug 19, 2019 at 10:37 PM Kurt Miller
wrote:
>
> On Mon, 2019-08-19 at 22:11 +0530, Jagan Teki wrote:
> > On Mon, Aug 19, 2019 at 8:42 PM Kurt Miller
> > wrote:
> > >
> > >
> > > Hi Michael,
> > >
> > > On Mon, 2019-08-19 at 16:06 +0200, Michael Nazzareno Trimarchi wrote:
> > > >
> > > >
On Mon, 2019-08-19 at 22:11 +0530, Jagan Teki wrote:
> On Mon, Aug 19, 2019 at 8:42 PM Kurt Miller
> wrote:
> >
> >
> > Hi Michael,
> >
> > On Mon, 2019-08-19 at 16:06 +0200, Michael Nazzareno Trimarchi wrote:
> > >
> > > It's possible to dump the register after training in mainline uboot?
>
On Mon, Aug 19, 2019 at 8:42 PM Kurt Miller wrote:
>
> Hi Michael,
>
> On Mon, 2019-08-19 at 16:06 +0200, Michael Nazzareno Trimarchi wrote:
> > It's possible to dump the register after training in mainline uboot?
>
> I'm working on getting master to build now. How would I
> go about dumping the r
On Mon, Aug 19, 2019 at 7:33 PM Kurt Miller wrote:
>
> On Mon, 2019-08-19 at 15:31 +0200, Mark Kettenis wrote:
> > >
> > > From: Jagan Teki
> > > Date: Mon, 19 Aug 2019 00:21:40 +0530
> > >
> > > + Kever
> > >
> > > On Sun, Aug 18, 2019 at 1:21 AM Kurt Miller
> > > wrote:
> > > >
> > > >
> > >
On Mon, Aug 19, 2019 at 7:01 PM Mark Kettenis wrote:
>
> > From: Jagan Teki
> > Date: Mon, 19 Aug 2019 00:21:40 +0530
> >
> > + Kever
> >
> > On Sun, Aug 18, 2019 at 1:21 AM Kurt Miller
> > wrote:
> > >
> > > Hello,
> > >
> > > The Rockpro64_V2.1 2018-07-02 using master code base freezes
> > >
Hi Michael,
On Mon, 2019-08-19 at 16:06 +0200, Michael Nazzareno Trimarchi wrote:
> It's possible to dump the register after training in mainline uboot?
I'm working on getting master to build now. How would I
go about dumping the register after training?
Regards,
-Kurt
__
Hi Kurt
On Mon, Aug 19, 2019 at 4:04 PM Kurt Miller wrote:
>
> On Mon, 2019-08-19 at 15:31 +0200, Mark Kettenis wrote:
> > >
> > > From: Jagan Teki
> > > Date: Mon, 19 Aug 2019 00:21:40 +0530
> > >
> > > + Kever
> > >
> > > On Sun, Aug 18, 2019 at 1:21 AM Kurt Miller
> > > wrote:
> > > >
> > >
On Mon, 2019-08-19 at 15:31 +0200, Mark Kettenis wrote:
> >
> > From: Jagan Teki
> > Date: Mon, 19 Aug 2019 00:21:40 +0530
> >
> > + Kever
> >
> > On Sun, Aug 18, 2019 at 1:21 AM Kurt Miller
> > wrote:
> > >
> > >
> > > Hello,
> > >
> > > The Rockpro64_V2.1 2018-07-02 using master code bas
> From: Jagan Teki
> Date: Mon, 19 Aug 2019 00:21:40 +0530
>
> + Kever
>
> On Sun, Aug 18, 2019 at 1:21 AM Kurt Miller
> wrote:
> >
> > Hello,
> >
> > The Rockpro64_V2.1 2018-07-02 using master code base freezes
> > with only the following output:
> >
> > U-Boot TPL 2019.10-rc2-1-gdf33f864
+ Kever
On Sun, Aug 18, 2019 at 1:21 AM Kurt Miller wrote:
>
> Hello,
>
> The Rockpro64_V2.1 2018-07-02 using master code base freezes
> with only the following output:
>
> U-Boot TPL 2019.10-rc2-1-gdf33f86468-dirty (Aug 16 2019 - 22:31:31)
>
> Whereas another board dated 2018-06-06 works and
Hello,
The Rockpro64_V2.1 2018-07-02 using master code base freezes
with only the following output:
U-Boot TPL 2019.10-rc2-1-gdf33f86468-dirty (Aug 16 2019 - 22:31:31)
Whereas another board dated 2018-06-06 works and outputs the following:
U-Boot TPL 2019.10-rc2-1-gdf33f86468-dirty (Aug
15 matches
Mail list logo