-Original Message-
From: Simon Kagstrom [mailto:simon.kagst...@netinsight.net]
Sent: Tuesday, August 25, 2009 1:00 PM
To: U-Boot ML
Cc: Prafulla Wadaskar; Nicolas Pitre
Subject: Re: [U-Boot] U-boot environment on Sheevaplug
Hi again!
I just wanted to check if there has been
On Thu, 3 Sep 2009 23:20:02 -0700
Prafulla Wadaskar prafu...@marvell.com wrote:
I just wanted to check if there has been any progress on the issue
below (4-bit ECC support to read for the kernel / U-boot) during the
summer.
I am restarting work on this issue for u-boot,
Does anybody
Sheevaplug handles the U-boot environment area.
On OpenRD base it's stored on the NAND flash, and is protected by a
4-bit ECC as required when read by the boot prom - it just goes
together with the rest of the u-boot image.
The Marvell-supplied 1.1.4 version has code to handle this (basically
-Original Message-
From: Simon Kagstrom [mailto:simon.kagst...@netinsight.net]
Sent: Tuesday, August 25, 2009 1:00 PM
To: U-Boot ML
Cc: Prafulla Wadaskar; Nicolas Pitre
Subject: Re: [U-Boot] U-boot environment on Sheevaplug
Hi again!
I just wanted to check if there has been
Hi Prafulla (and the list)!
I'm wondering a bit how Sheevaplug handles the U-boot environment area.
On OpenRD base it's stored on the NAND flash, and is protected by a
4-bit ECC as required when read by the boot prom - it just goes
together with the rest of the u-boot image.
The Marvell-supplied
5 matches
Mail list logo