Hello Sean

> -----Original Message-----
> From: Sean Anderson <sean.ander...@seco.com>
> Sent: Tuesday, August 17, 2021 9:51 PM
> To: Gaurav Jain <gaurav.j...@nxp.com>; u-boot@lists.denx.de; Franck
> Lenormand <franck.lenorm...@nxp.com>
> Cc: Stefano Babic <sba...@denx.de>; Fabio Estevam <feste...@gmail.com>;
> Peng Fan <peng....@nxp.com>; Simon Glass <s...@chromium.org>; Priyanka
> Jain <priyanka.j...@nxp.com>; Ye Li <ye...@nxp.com>; Horia Geanta
> <horia.gea...@nxp.com>; Ji Luo <ji....@nxp.com>; Silvano Di Ninno
> <silvano.dini...@nxp.com>; Sahil Malhotra <sahil.malho...@nxp.com>; Pankaj
> Gupta <pankaj.gu...@nxp.com>; Varun Sethi <v.se...@nxp.com>; dl-uboot-imx
> <uboot-...@nxp.com>; Shengzhou Liu <shengzhou....@nxp.com>; Mingkai Hu
> <mingkai...@nxp.com>; Rajesh Bhagat <rajesh.bha...@nxp.com>; Meenakshi
> Aggarwal <meenakshi.aggar...@nxp.com>; Wasim Khan
> <wasim.k...@nxp.com>; Alison Wang <alison.w...@nxp.com>; Pramod
> Kumar <pramod.kuma...@nxp.com>; Andy Tang <andy.t...@nxp.com>;
> Adrian Alonso <adrian.alo...@nxp.com>; Vladimir Oltean <olte...@gmail.com>
> Subject: [EXT] Re: [PATCH 05/15] i.MX6: Enable Job ring driver model in 
> U-Boot.
> 
> Caution: EXT Email
> 
> On 8/16/21 4:42 AM, Gaurav Jain wrote:
> > i.MX6(SX/UL) - added support for JR driver model.
> >
> > removed sec_init() call, sec is initialized based on job ring
> > information processed from device tree.
> >
> > Signed-off-by: Gaurav Jain <gaurav.j...@nxp.com>
> > ---
> >   arch/arm/mach-imx/mx6/Kconfig |  8 ++++++++
> >   arch/arm/mach-imx/mx6/soc.c   | 15 +++++++++++----
> >   2 files changed, 19 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm/mach-imx/mx6/Kconfig
> > b/arch/arm/mach-imx/mx6/Kconfig index 789a50d4e9..a7109bb512 100644
> > --- a/arch/arm/mach-imx/mx6/Kconfig
> > +++ b/arch/arm/mach-imx/mx6/Kconfig
> > @@ -378,6 +378,10 @@ config TARGET_MX6SXSABRESD
> >       select DM
> >       select DM_THERMAL
> >       select SUPPORT_SPL
> > +     select FSL_CAAM
> > +     select FSL_BLOB
> > +     select MISC
> > +     select ARCH_MISC_INIT
> >
> >   config TARGET_MX6SXSABREAUTO
> >       bool "mx6sxsabreauto"
> > @@ -405,6 +409,10 @@ config TARGET_MX6UL_14X14_EVK
> >       select DM_THERMAL
> >       select SUPPORT_SPL
> >       imply CMD_DM
> > +     select FSL_CAAM
> > +     select FSL_BLOB
> > +     select MISC
> > +     select ARCH_MISC_INIT
> >
> >   config TARGET_MX6UL_ENGICAM
> >       bool "Support Engicam GEAM6UL/Is.IoT"
> > diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
> > index aacfc854a2..3d8f649c23 100644
> > --- a/arch/arm/mach-imx/mx6/soc.c
> > +++ b/arch/arm/mach-imx/mx6/soc.c
> > @@ -4,6 +4,7 @@
> >    * Sascha Hauer, Pengutronix
> >    *
> >    * (C) Copyright 2009 Freescale Semiconductor, Inc.
> > + * Copyright 2021 NXP
> >    */
> >
> >   #include <common.h>
> > @@ -23,7 +24,8 @@
> >   #include <asm/arch/mxc_hdmi.h>
> >   #include <asm/arch/crm_regs.h>
> >   #include <dm.h>
> > -#include <fsl_sec.h>
> > +#include <dm/uclass-internal.h>
> > +#include <dm/device-internal.h>
> >   #include <imx_thermal.h>
> >   #include <mmc.h>
> >
> > @@ -734,9 +736,14 @@ static void setup_serial_number(void)
> >
> >   int arch_misc_init(void)
> >   {
> > -#ifdef CONFIG_FSL_CAAM
> > -     sec_init();
> > -#endif
> > +     struct udevice *dev;
> > +
> > +     uclass_find_first_device(UCLASS_MISC, &dev);
> > +     for (; dev; uclass_find_next_device(&dev)) {
> > +             if (device_probe(dev))
> > +                     continue;
> > +     }
> 
> Can you just do
> 
>         uclass_get_device_by_driver(UCLASS_MISC, DM_GET_DRIVER(caam_jr),
> &dev);
> 
> instead of probing all MISC devices?
> 
I will make the suggested change in the version 2 of the patches.

Regards
Gaurav Jain

> > +
> >       setup_serial_number();
> >       return 0;
> >   }
> >

Reply via email to