I think you are the moderator.
Relax. The information is still being shared.
> Regards,
> Amit
HTH,
gvb
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Thursday, July 10, 2008 4:37 PM
> To: Amit Kumar
> Cc: u-boot-users@lists.sourcef
lto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2008 4:37 PM
To: Amit Kumar
Cc: u-boot-users@lists.sourceforge.net
Subject: Re: [U-Boot-Users] Tftp command !!
In message <[EMAIL PROTECTED]> you wrote:
>
> > If you had to make changes, this means that you are not running on the
> very
In message <[EMAIL PROTECTED]> you wrote:
>
> > If you had to make changes, this means that you are not running on the
> very same hardware as trhe board configuration was made for.
I don't really believe that.
> [Amit]: If you look at my so called "changes" they don't make any difference.
> Fo
e anything wrong. If
you still think I have done something wrong or I have missed something, kindly
explain me.
Regards,
Amit Kumar
Project Manager
Infosys, India
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 09, 2008 5:43 PM
To: Amit Kumar
C
Dear Amit,
in message <[EMAIL PROTECTED]> you wrote:
>
> In this code, I have made only two changes:
If you had to make changes, this means that you are not running on the
very same hardware as trhe board configuration was made for.
This WILL NOT work.
If you have custom hardware, you will hav
Hello,
I downloaded code from ftp://ftp.denx.de/pub/u-boot/u-boot-1.3.3.tar.bz2
In this code, I have made only two changes:
1) #define CFG_MAX_FLASH_SECT 259 (include/configs/pxa255_idp.h)
2) #define CFG_FLASH_PROTECTION 1 (include/configs/pxa255_idp.h)
On my board (pxa
