Re: [U-Boot] [PATCH v2] mpc83xx: update LCRR register handling

2009-08-26 Thread Heiko Schocher
Hello Kim, Kim Phillips wrote: On Tue, 25 Aug 2009 13:31:34 +0200 Heiko Schocher h...@denx.de wrote: MPC8379E RM says (10-34): Once LCRR[CLKDIV] is written, the register should be read, and then an isync should be executed. So update this in code. Also define a LCRR mask for processors,

Re: [U-Boot] [PATCH v2 2/3] Reset interrupted i2c slaves (galaxy5200)

2009-08-26 Thread Heiko Schocher
Hello Eric, Eric Millbrandt wrote: Reset any i2c devices that may have been interrupted by a system reset. Normally this would be accomplished by clocking the line until SCL and SDA are released and then sending a start condtiion (From an Atmel datasheet). But since there is only write access

Re: [U-Boot] [PATCH:v3] Support up to 7 banks for ids as specified in JEDEC JEP106Z

2009-08-26 Thread Stefan Roese
On Wednesday 22 July 2009 17:13:24 Niklaus Giger wrote: see http://www.jedec.org/download/search/jep106Z.pdf Add some second source legacy flash chips 256x8. Signed-off-by: Niklaus Giger niklaus.gi...@member.fsf.org Applied to cfi-flash/next. Thanks. Cheers, Stefan -- DENX Software

Re: [U-Boot] [PATCH v2] ppc4xx: Rename compactcenter to intip

2009-08-26 Thread Stefan Roese
Hi Dirk, On Friday 21 August 2009 10:13:21 Dirk Eibach wrote: Signed-off-by: Dirk Eibach eib...@gdsys.de --- Changes since v1: - also changed config name Makefile| 16 include/configs/compactcenter.h |6 +++--- 2 files changed, 11

[U-Boot] Please pull u-boot-cfi-flash/next

2009-08-26 Thread Stefan Roese
The following changes since commit d3870bd2d832ea2048b7cb2bbb9d642585b137cf: Wolfgang Denk (1): Merge branch 'next' of git://git.denx.de/u-boot-net into next are available in the git repository at: git://www.denx.de/git/u-boot-cfi-flash.git next Niklaus Giger (1): Support up

Re: [U-Boot] Phy lib again

2009-08-26 Thread Michal Simek
Hi Ben, Ben Warren wrote: Hi Michal, Michal Simek wrote: Hi Stefan, Stefan Roese wrote: Hi Michal, On Tuesday 25 August 2009 09:02:14 Michal Simek wrote: I saw you have phy lib in your branch. What is the current state? Are there any problems? When do you want to add to

[U-Boot] Custom PPC440GX board: Unsupported relocation error

2009-08-26 Thread Wouter Eckhardt
Hi all. I've been busy getting a custom PPC440GX board to boot U-Boot. I started with a U-Boot (version 1.3.2) based on the ALPR board and the ELDK 4.0 toolchain. I got all that working and now I trying to move up to a newer version of U-Boot and a newer toolchain (specifically: U-Boot 2009.03

Re: [U-Boot] Xilinx LL temac update

2009-08-26 Thread Michal Simek
Hi Ben, Ben Warren wrote: Hi Michal, mon...@monstr.eu wrote: Hi Ben, I updated LL-temac driver - all fixes are there. Ad to your point Microblaze uses only one ethernet core. It is possible to use a lot of IPs but I don't have board like this to test it that's why I don't want change it.

[U-Boot] why the u-boot have no upload command?or there is another way to upload data to host?

2009-08-26 Thread IaMaPlAyEr
hi all: I do like to ask a question, why u-boot have no upload command? image such a scene: you have two board, and develop with one, but to some unknow reason, the board cannot boot. maybe it is the hardware problem, you want to upload all the data---a bin file, and download it to another

[U-Boot] [PATCH 1/2] drivers/mmc/atmel_mci.c: port to the new CONFIG_GENERIC_MMC API

2009-08-26 Thread Albin Tonnerre
This patch updates (well, pretty much rewrites, actually) the atmel_mci driver so that it can be used with the new mmc API. Currently, the driver only supports what the previous driver supported, that is: - assumes that the MMC slot was configured in the cpu/board code, no slot-switching -

[U-Boot] [PATCH 2/2] AVR32: update to use CONFIG_GENERIC_MMC

2009-08-26 Thread Albin Tonnerre
With the patch updating the atmel_mci driver, some updates are necessary on AVR32 to make the MMC support working. This patch defines CONFIG_GENERIC_MMC in the affected boards config and defines the function cpu_mmc_init. Signed-off-by: Albin Tonnerre albin.tonne...@free-electrons.com --- As I

[U-Boot] Continuos reboot in u-boot 1.3.4

2009-08-26 Thread Virupax . SS
Hi I am using u-boot 1.3.4 ( got from atmel) on AT91SAM9G20 , If enable the ethernet related code in the u-boot ( drivers etc) the board starts resetting again and again continuously without giving any error message. Please somebody tell me what type of mistakes ( coding errors ) make the

Re: [U-Boot] [RESEND][PATCH 3/6]POSEIDON Board Support

2009-08-26 Thread Vivek
Hi Wolfgang - Original Message - From: Wolfgang Denk w...@denx.de To: Vivek v.da...@samsung.com Cc: Scott Wood scottw...@freescale.com; u-boot@lists.denx.de Sent: Friday, July 31, 2009 12:34 AM Subject: Re: [U-Boot] [RESEND][PATCH 3/6]POSEIDON Board Support Dear Vivek, In message

Re: [U-Boot] Custom PPC440GX board: Unsupported relocation error

2009-08-26 Thread Wolfgang Denk
Dear Wouter Eckhardt, In message 4cd35cd1f8085945b597f80eec8942130348d...@exc01.bk.prodrive.nl you wrote: I've been busy getting a custom PPC440GX board to boot U-Boot. I started with a U-Boot (version 1.3.2) based on the ALPR board and the ELDK 4.0 toolchain. I got all that working and

[U-Boot] Re-distributing mkimage binary

2009-08-26 Thread Premi, Sanjeev
Hi, Is it possible to redistribute the mkimage binary outside the u-boot package? Best regards, Sanjeev ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Re-distributing mkimage binary

2009-08-26 Thread Kumar Gala
As long as you conform to the GPL its fine. - k On Aug 26, 2009, at 9:15 AM, Premi, Sanjeev wrote: Hi, Is it possible to redistribute the mkimage binary outside the u-boot package? Best regards, Sanjeev ___ U-Boot mailing list

Re: [U-Boot] Re-distributing mkimage binary

2009-08-26 Thread Wolfgang Denk
Dear Sanjeev, In message b85a65d85d7eb246be421b3fb0fbb59301dd430...@dbde02.ent.ti.com you wrote: Is it possible to redistribute the mkimage binary outside the u-boot package? Yes, of course this is possible. It's Free Software under GPL, so you can modify and/or repackage it as you like.

Re: [U-Boot] Re-distributing mkimage binary

2009-08-26 Thread Premi, Sanjeev
-Original Message- From: Wolfgang Denk [mailto:w...@denx.de] Sent: Wednesday, August 26, 2009 8:20 PM To: Premi, Sanjeev Cc: U-Boot Mailing List Subject: Re: [U-Boot] Re-distributing mkimage binary Dear Sanjeev, In message

[U-Boot] ARM926ej, trying to serve interrupt

2009-08-26 Thread Ricardo Martínez
Hi, I'm trying to printf something when one timer generates an interrupt. u-boot version is 1.3.4. The steps I've followed: - #define CONFIG_USE_IRQ - I've enabled interrupts - I've enabled timer interrupt - I've enabled timer - I've checked interrupt masks - I've checked interrupt status

[U-Boot] Please pull u-boot-coldfire

2009-08-26 Thread Liew Tsi Chung-R5AAHP
Hi Wolfgang, The following changes since commit d3870bd2d832ea2048b7cb2bbb9d642585b137cf: Wolfgang Denk (1): Merge branch 'next' of git://git.denx.de/u-boot-net into next are available in the git repository at: git://www.denx.de/git/u-boot-coldfire.git next TsiChung Liew (2):

Re: [U-Boot] Custom PPC440GX board: Unsupported relocation error

2009-08-26 Thread Wouter Eckhardt
-Original Message- From: Wolfgang Denk [mailto:w...@denx.de] Sent: woensdag 26 augustus 2009 15:38 To: Wouter Eckhardt Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] Custom PPC440GX board: Unsupported relocation error Dear Wouter Eckhardt, In message

Re: [U-Boot] ARM926ej, trying to serve interrupt

2009-08-26 Thread Wolfgang Denk
Dear =?iso-8859-1?Q?Ricardo_Mart=EDnez?=, In message !!aaayajp7zgtd32xai3bhclyaeq3cgaaaeoigrx5geblkkejr+11mkvqba...@teltronic.es you wrote: I'm trying to printf something when one timer generates an interrupt. Hm... there are certain things you can do in interrupt

Re: [U-Boot] [PATCH v2 2/3] Reset interrupted i2c slaves (galaxy5200)

2009-08-26 Thread Eric Millbrandt
Hi Heiko, On Wed, 26 Aug 2009 08:57:46 +0200, Heiko Schocher wrote Hello Eric, Eric Millbrandt wrote: Reset any i2c devices that may have been interrupted by a system reset. Normally this would be accomplished by clocking the line until SCL and SDA are released and then sending a start

Re: [U-Boot] Please pull u-boot-cfi-flash/next

2009-08-26 Thread Wolfgang Denk
Dear Stefan Roese, In message 200908260911.36968...@denx.de you wrote: The following changes since commit d3870bd2d832ea2048b7cb2bbb9d642585b137cf: Wolfgang Denk (1): Merge branch 'next' of git://git.denx.de/u-boot-net into next are available in the git repository at:

Re: [U-Boot] Please pull u-boot-coldfire

2009-08-26 Thread Wolfgang Denk
Dear Liew Tsi Chung-R5AAHP, In message 4791e710007feb4bbf83775d787f462f08d3d...@az33exm22.fsl.freescale.net you wrote: Hi Wolfgang, The following changes since commit d3870bd2d832ea2048b7cb2bbb9d642585b137cf: Wolfgang Denk (1): Merge branch 'next' of

Re: [U-Boot] [PATCH] Cleanup typo and trailing whitespace

2009-08-26 Thread Wolfgang Denk
Dear Eric Millbrandt, In message 20090825152816.m45...@coldhaus.com you wrote: Cleanup typo and trailing whitespace from galaxy5200.h Signed-off-by: Eric Millbrandt emillbra...@dekaresearch.com --- include/configs/galaxy5200.h |8 1 files changed, 4 insertions(+), 4

Re: [U-Boot] [PATCH v4] use common code for Matrix Vision boards

2009-08-26 Thread Wolfgang Denk
Dear =?ISO-8859-1?Q?Andr=E9?= Schwarz, In message 1250682092.22118.8.ca...@swa-m460 you wrote: clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by using common code. Signed-off-by: Andr=C3=A9 Schwarz andre.schw...@matrix-vision.de --- Wolfgang, this is my current diff

Re: [U-Boot] [PATCH] OneNAND: Remove unused read_spareram

2009-08-26 Thread Wolfgang Denk
Dear Kyungmin Park, In message 20090721025804.ga3...@july you wrote: Remove unused read_spareram and add unlock_all as kernel does Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com --- Applied to next, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD:

Re: [U-Boot] [U-boot][PATCH] AMCC ppc440SPe PCIe PLL lock error

2009-08-26 Thread Wolfgang Denk
Dear Stefan, In message 89f945070907210538u2784629ev72346813b8a35...@mail.gmail.com Rupjyoti Sarmah wrote: u-boot reports a PCIE PLL lock error at boot time on Yucca board, and left PCIe nonfunctional. This is fixed by making u-boot function ppc4xx_init_pcie() to wait 300 uS after negating

Re: [U-Boot] [PATCH] Add some second source legacy flash chips 256x8

2009-08-26 Thread Wolfgang Denk
Dear Stefan, In message 1248205624-17062-1-git-send-email-niklaus.gi...@member.fsf.org Niklaus Giger wrote: Signed-off-by: Niklaus Giger niklaus.gi...@member.fsf.org --- We tested some boot flashes as possible second source. As some had ids above 0x7f, we had to implement JEDEC JEP106Z in

Re: [U-Boot] [PATCH] imx27lite: add support for imx27lite board from LogicPD

2009-08-26 Thread Wolfgang Denk
Dear Scott, In message 20090814070359.gd11...@game.jcrosoft.org Jean-Christophe PLAGNIOL-VILLARD wrote: On 02:32 Tue 11 Aug , Ilya Yanok wrote: This patch adds support for i.MX27-LITEKIT development board from LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND flash,

Re: [U-Boot] How can I make a second serial port on a motorola 8248 Chip known to Linux.

2009-08-26 Thread AGKohler
I am using u-boot version 1.1.3, kernel, Linux(Debian) is version 2.6.12. I searched through the kernel configuration options via menuconfig, i could not find anything that configures the number of serial ports. In LINUX, i tried creating ttyS1 with mknod -m 660 /dev/ttS1 c 4 65. A /dev/ttyS1

[U-Boot] [RFC PATCH 3/3] phylib: add generic phy driver

2009-08-26 Thread Jean-Christophe PLAGNIOL-VILLARD
this driver must be the last one registered to be the last one probed Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com --- drivers/net/phy/Makefile |1 + drivers/net/phy/generic.c | 35 +++ drivers/net/phy/phylib.c |8

[U-Boot] [RFC PATCH 2/3] net: add phylib implementation

2009-08-26 Thread Jean-Christophe PLAGNIOL-VILLARD
the current implementation will allow you to probe, instance and mananage one phy_device per mii_device this implementation is based on the linux implementation done by Andy Fleming Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagn...@jcrosoft.com --- drivers/net/phy/Makefile |1 +

Re: [U-Boot] How can I make a second serial port on a motorola 8248 Chip known to Linux.

2009-08-26 Thread Scott Wood
On Wed, Aug 26, 2009 at 01:15:39PM -0700, AGKohler wrote: I am using u-boot version 1.1.3, kernel, Linux(Debian) is version 2.6.12. Both of thosed are extremely old. Our ability to help you with them is very limited. Please use the current code. I searched through the kernel configuration

[U-Boot] Pull request: nand flash next

2009-08-26 Thread Scott Wood
The following changes since commit d7f4d14a8b317857163ccf3d97e3b1a46ba2282e: Wolfgang Denk (1): Merge branch 'next' of git://www.denx.de/git/u-boot-coldfire into next are available in the git repository at: git://git.denx.de/u-boot-nand-flash.git next Heiko Schocher (1): 83xx,

Re: [U-Boot] [PATCH] imx27lite: add support for imx27lite board from LogicPD

2009-08-26 Thread Scott Wood
Wolfgang Denk wrote: Scott could you applied on your tree as this one need the nand patch that you handle Could you please run this through your next branch and send a pullr equest? TIA. Acked-by: Wolfgang Denk w...@denx.de I don't have that patch in my inbox anymore -- but I've sent a

Re: [U-Boot] [PATCH] Add ability for arch code to make changes before we boot

2009-08-26 Thread Wolfgang Denk
Dear Kumar Gala, In message 1250276442-28463-1-git-send-email-ga...@kernel.crashing.org you wrote: Added a arch_preboot() function that cpu specific code can implement to allow for various modifications to the state of the machine right before we boot. This can be useful to setup register

Re: [U-Boot] How can I make a second serial port on a motorola 8248 Chip known to Linux.

2009-08-26 Thread Wolfgang Denk
Dear AGKohler, please do not top post-full quote. Make sure to read http://www.netmeister.org/news/learn2quote.html And please note that this still off topic on this list. It is a LINUX question, not an U-Boot one. In message 25157108.p...@talk.nabble.com you wrote: I am using u-boot

Re: [U-Boot] [PATCH v2] mpc83xx: update LCRR register handling

2009-08-26 Thread Kim Phillips
On Wed, 26 Aug 2009 08:28:37 +0200 Heiko Schocher h...@denx.de wrote: Hello Kim, Kim Phillips wrote: On Tue, 25 Aug 2009 13:31:34 +0200 Heiko Schocher h...@denx.de wrote: + /* MPC8379E RM 10-34 says after writting this register + * the register should be reread and an isync should

Re: [U-Boot] [RFC PATCH 1/3] net: rework the mii support

2009-08-26 Thread Mike Frysinger
On Wednesday 26 August 2009 16:13:01 Jean-Christophe PLAGNIOL-VILLARD wrote: this rework is done in order to add a phylib and reduce and simplify the implementation of multi net_device support for the same driver i think you mean multi phy ... precedently we pass the device name to the

Re: [U-Boot] [RFC PATCH 2/3] net: add phylib implementation

2009-08-26 Thread Mike Frysinger
On Wednesday 26 August 2009 16:13:02 Jean-Christophe PLAGNIOL-VILLARD wrote: the current implementation will allow you to probe, instance and mananage one phy_device per mii_device instance - instantiate mananage - manage --- /dev/null +++ b/drivers/net/phy/phylib.c @@ -0,0 +1,535 @@ +/*

Re: [U-Boot] [RFC PATCH 3/3] phylib: add generic phy driver

2009-08-26 Thread Mike Frysinger
On Wednesday 26 August 2009 16:13:03 Jean-Christophe PLAGNIOL-VILLARD wrote: +void generic_phy_register(void) +{ + struct phy_driver generic_phy = { + .name = Generic PHY, + .phy_id = 0x, + .phy_id_mask = 0x, + .features =

Re: [U-Boot] [PATCH] mpc83xx: match dtb filename references to their dts equivalents in the linux kernel

2009-08-26 Thread Kim Phillips
On Fri, 21 Aug 2009 17:38:38 -0500 Kim Phillips kim.phill...@freescale.com wrote: Signed-off-by: Kim Phillips kim.phill...@freescale.com --- applied. Kim ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH] mpc83xx: mpc8349itx - accommodate larger kernel sizes unzero the bootdelay

2009-08-26 Thread Kim Phillips
On Mon, 24 Aug 2009 14:32:18 -0500 Kim Phillips kim.phill...@freescale.com wrote: apparently the ITX was missed last round. Also make bootdelay consistent with other boards, so as to give on the opportunity to fix mistakenly set bootcmd without having checked for an bootdelay zero setting

[U-Boot] Please pull u-boot-mpc83xx.git

2009-08-26 Thread Kim Phillips
Hi Wolfgang Denk, Please pull a couple of minor fix patches for the upcoming release: The following changes since commit 85f9823cd74bd2d9a7854ca0b2244e43b5214e5a: Wolfgang Denk (1): Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx are available in the git repository at:

Re: [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash

2009-08-26 Thread Hu Mingkai-B21284
Hi Wolfgang, First truly sorry for the long time delay. I'm not on purpose. I reworked this patch and unified the implementation of booting from NAND/SDCard/SPI flash for MPC85xx platform, and sent to the U-Boot list on August: http://lists.denx.de/pipermail/u-boot/2009-August/058803.html Also

Re: [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support

2009-08-26 Thread Hu Mingkai-B21284
Hi Mike, First truly sorry for the long time delay. Please find comments inline. -Original Message- From: Mike Frysinger [mailto:vap...@gentoo.org] Sent: Monday, March 16, 2009 6:06 PM To: Hu Mingkai-B21284 Cc: u-boot@lists.denx.de; Jean-Christophe PLAGNIOL-VILLARD; Fleming

Re: [U-Boot] [PATCH] Add ability for arch code to make changes before we boot

2009-08-26 Thread Kumar Gala
On Aug 26, 2009, at 10:27 PM, Kumar Gala wrote: On Aug 26, 2009, at 3:46 PM, Wolfgang Denk wrote: Dear Kumar Gala, In message 1250276442-28463-1-git-send-email-ga...@kernel.crashing.org you wrote: Added a arch_preboot() function that cpu specific code can implement to allow for various

Re: [U-Boot] [U-boot][PATCH] AMCC ppc440SPe PCIe PLL lock error

2009-08-26 Thread Stefan Roese
Hi Wolfgang, On Wednesday 26 August 2009 22:09:27 Wolfgang Denk wrote: u-boot reports a PCIE PLL lock error at boot time on Yucca board, and left PCIe nonfunctional. This is fixed by making u-boot function ppc4xx_init_pcie() to wait 300 uS after negating reset before the first check of

Re: [U-Boot] [PATCH] Add some second source legacy flash chips 256x8

2009-08-26 Thread Stefan Roese
Hi Wolfgang, On Wednesday 26 August 2009 22:10:42 Wolfgang Denk wrote: We tested some boot flashes as possible second source. As some had ids above 0x7f, we had to implement JEDEC JEP106Z in cfi_flash.c. I now that I just missed the merge window, but the patches are not urgent and I was

Re: [U-Boot] [RFC PATCH 2/3] net: add phylib implementation

2009-08-26 Thread Stefan Roese
On Thursday 27 August 2009 03:55:57 Mike Frysinger wrote: +int phy_init(void) +{ + /* Initialize the list */ + INIT_LIST_HEAD(phy_drvs.list); does it really need to be dynamic ? arent there static initializers so this can be done in .data ? Using static initializers fails on PPC

Re: [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support

2009-08-26 Thread Mike Frysinger
On Wednesday 26 August 2009 23:01:52 Hu Mingkai-B21284 wrote: From: Mike Frysinger [mailto:vap...@gentoo.org] On Monday 16 March 2009 04:56:22 Hu Mingkai-B21284 wrote: But the eSPI controller integrate the chip select into the controller itself, it use the transfer length to control the

Re: [U-Boot] [RFC PATCH 2/3] net: add phylib implementation

2009-08-26 Thread Mike Frysinger
On Thursday 27 August 2009 01:11:32 Stefan Roese wrote: On Thursday 27 August 2009 03:55:57 Mike Frysinger wrote: +int phy_init(void) +{ + /* Initialize the list */ + INIT_LIST_HEAD(phy_drvs.list); does it really need to be dynamic ? arent there static initializers so this can