Hi, experts:
There is an iloop command in older version uboot.
Current uboot also included i2c loop cmd.
It's an infinite loop on i2c_read.
So, when to use this command?
Just for debugging I2C read function?
Best wishes,
___
U-Boot mailing list
Hi, Chris,
For the init value of next_pbl_cmd, there was a patch at below link can be
used:
http://lists.denx.de/pipermail/u-boot/2013-March/150260.html
this patch with your modification below should can meet your requirement:
-static unsigned char mem_buf[60];
+static unsigned char
Hi,
Thanks for your response.
On Mon, May 27, 2013 at 11:09 AM, Rajeshwari Birje
rajeshwari.bi...@gmail.com wrote:
Hi Jagan,
Hope following reply answer your query.
On Sat, May 25, 2013 at 2:08 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi,
Any update on this, is this a different
On 24/05/2013 08:18, Wang Huan-B18965 wrote:
[Alison Wang] We usually named the Powerpc(before QorIQ) as MPC and ColdFire
as MCF, So we generally named the Vybrid as MVF.
We had some internal discussion for this, and we think we should use VF
instead of MVF, we will follow the internal
Hi Rajeshwari,
On Mon, May 27, 2013 at 11:59 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi,
Thanks for your response.
On Mon, May 27, 2013 at 11:09 AM, Rajeshwari Birje
rajeshwari.bi...@gmail.com wrote:
Hi Jagan,
Hope following reply answer your query.
On Sat, May 25, 2013 at 2:08
Hi Heiko,
Hello Tom,
Am 24.05.2013 19:12, schrieb Tom Rini:
On Fri, May 24, 2013 at 07:42:01PM +0300, Pantelis Antoniou wrote:
Hi Heiko,
On May 24, 2013, at 7:39 PM, Heiko Schocher wrote:
Hello,
just digging in DFU support in U-Boot for an upcoming board
support based on an
Hello Lukasz,
Am 27.05.2013 09:02, schrieb Lukasz Majewski:
Hi Heiko,
Hello Tom,
Am 24.05.2013 19:12, schrieb Tom Rini:
On Fri, May 24, 2013 at 07:42:01PM +0300, Pantelis Antoniou wrote:
Hi Heiko,
On May 24, 2013, at 7:39 PM, Heiko Schocher wrote:
Hello,
just digging in DFU support
Hi Guys,
On May 27, 2013, at 10:28 AM, Heiko Schocher wrote:
Hello Lukasz,
Am 27.05.2013 09:02, schrieb Lukasz Majewski:
Hi Heiko,
Hello Tom,
Am 24.05.2013 19:12, schrieb Tom Rini:
On Fri, May 24, 2013 at 07:42:01PM +0300, Pantelis Antoniou wrote:
Hi Heiko,
On May 24, 2013, at
So, about this patch, what need I do?
-Original Message-
From: Tom Rini [mailto:tom.r...@gmail.com] On Behalf Of Tom Rini
Sent: Saturday, May 25, 2013 3:18 AM
To: Wood Scott-B07421
Cc: u-boot@lists.denx.de; Zhang Ying-B40530; aflem...@gmail.com; Xie
Xiaobo-R63061; Zhang Ying-B40530
Hello,
Am 27.05.2013 09:35, schrieb Pantelis Antoniou:
Hi Guys,
On May 27, 2013, at 10:28 AM, Heiko Schocher wrote:
Hello Lukasz,
Am 27.05.2013 09:02, schrieb Lukasz Majewski:
Hi Heiko,
Hello Tom,
Am 24.05.2013 19:12, schrieb Tom Rini:
On Fri, May 24, 2013 at 07:42:01PM +0300,
Hello,
Am 27.05.2013 08:08, schrieb tiger...@viatech.com.cn:
Hi, experts:
There is an iloop command in older version uboot.
Current uboot also included i2c loop cmd.
Yes.
It's an infinite loop on i2c_read.
Yes!
So, when to use this command?
Just for debugging I2C read function?
If you
2013/5/26 Gabor Juhos juh...@openwrt.org:
The FTSDC010_DCR_FIFO_RST symbol is conditionally
defined in faraday/ftsdc010.h and it is available
available when CONFIG_FTSDC010_SDIO is enabled.
However the actual driver code unconditionally uses
the FTSDC010_DCR_FIFO_RST constant and this causes
On 05/24/2013 10:13:55 PM, Scott Wood wrote:
On 05/23/2013 04:52:26 AM, Jérôme Arzel wrote:
Hi all,
I have an issue when I compile U-Boot for my target machine
(P1022DS,
36-bit).
Here is the error message:
release.S: Assembler messages:
release.S:154: Error: operand out of
U-Boot has become slightly larger than where the environment sector
was previously located. Saving the environment would brick the device.
Relocate the environment to where it is with the stock (i.e. Marvell
USP) U-Boot version. That should give plenty of room for U-Boot to
grow, including local
Hi Tapani,
On Mon, May 27, 2013 at 1:13 AM, Tapani Utriainen tap...@technexion.com wrote:
Add support for the Wandboard quad.
Signed-off-by: Tapani Utriainen tap...@technexion.com
---
boards.cfg | 1 +
include/configs/wandboard.h | 2 ++
2 files changed, 3 insertions(+)
This commit refactors common/board_f.c and common/board_r.c
in order to delete the dest_addr and dest_addr_sp from
gd_t struct.
As mentioned as follows in include/asm-generic/global_data.h,
/* TODO: is this the same as relocaddr, or something else? */
unsigned long dest_addr;/*
On 27/05/13 18:18, Xie Shaohui-B21989 wrote:
Hi, Chris,
For the init value of next_pbl_cmd, there was a patch at below link can be
used:
http://lists.denx.de/pipermail/u-boot/2013-March/150260.html
Thanks for the pointer. I did check the main u-boot.git tree but didn't
search the list.
Dear Wolfgang Denk,
-Original Message-
From: Wolfgang Denk [mailto:w...@denx.de]
Sent: Friday, May 24, 2013 8:33 PM
To: Piotr Wilczek
Cc: u-boot@lists.denx.de; Kyungmin Park
Subject: Re: [U-Boot] [PATCH] drivers:lcd: fix unaligned access on lcd
Dear Piotr Wilczek,
In message
On Mon, May 27, 2013 at 1:13 AM, Tapani Utriainen tap...@technexion.comwrote:
Add support for the Wandboard quad.
Signed-off-by: Tapani Utriainen tap...@technexion.com
---
boards.cfg | 1 +
include/configs/wandboard.h | 2 ++
2 files changed, 3 insertions(+)
diff
We are using BDI3000 to Burn u-boot.bin to Flash memory. The flash we are
using is Spansion S29GL512S.
As per the flash datasheet we tried programming 4 bytes( using telnet mmb
command) write buffer programming cycle. We succeeded.
But when we tried programming a binary file ( u-boot.bin) ,it
Hi Monica,
On Mon, May 27, 2013 at 10:01 AM, Monica monic...@hcl.com wrote:
We are using BDI3000 to Burn u-boot.bin to Flash memory. The flash we are
using is Spansion S29GL512S.
As per the flash datasheet we tried programming 4 bytes( using telnet mmb
command) write buffer programming
Hi Albert,
On Mon, May 20, 2013 at 2:26 AM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Benoît,
On Sun, 19 May 2013 17:57:59 +0200 (CEST), Benoît Thébaudeau
benoit.thebaud...@advansee.com wrote:
Hi Albert,
On Sunday, May 19, 2013 1:48:11 PM, Albert ARIBAUD wrote:
This series
Hi Simon,
On Mon, 27 May 2013 07:56:48 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On Mon, May 20, 2013 at 2:26 AM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Benoît,
On Sun, 19 May 2013 17:57:59 +0200 (CEST), Benoît Thébaudeau
benoit.thebaud...@advansee.com
Dear Heiko Schocher,
In message 51a30f34.7030...@denx.de you wrote:
But how to handle a raw nand partition and a ubi partition on one
nand?
If ubi is a new dfu interface, somebody must start dfu on u-boot
with dfu nand .. or dfu ubi .. dependent on which partition
has to be updated ...
Hi
On May 27, 2013, at 7:25 PM, Wolfgang Denk wrote:
Dear Heiko Schocher,
In message 51a30f34.7030...@denx.de you wrote:
But how to handle a raw nand partition and a ubi partition on one
nand?
If ubi is a new dfu interface, somebody must start dfu on u-boot
with dfu nand .. or dfu
The board needs to be under a 'wandboard' vendor so we can use it to
choose the proper Boot Splash image.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
board/wandboard/{ = }/wandboard/Makefile| 0
board/wandboard/{ = }/wandboard/README | 0
board/wandboard/{ =
Hi Albert,
On Mon, May 27, 2013 at 9:16 AM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Simon,
On Mon, 27 May 2013 07:56:48 -0700, Simon Glass s...@chromium.org
wrote:
Hi Albert,
On Mon, May 20, 2013 at 2:26 AM, Albert ARIBAUD
albert.u.b...@aribaud.netwrote:
Hi Benoît,
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/wandboard.h | 3 +++
tools/Makefile | 3 +++
tools/logos/wandboard.bmp | Bin 0 - 22390 bytes
3 files changed, 6 insertions(+)
create mode 100644 tools/logos/wandboard.bmp
diff --git
The board needs to be under a 'wandboard' vendor so we can use it to
choose the proper Boot Splash image.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v2:
- Fix indenting in boards.cfg
board/wandboard/{ = }/wandboard/Makefile| 0
board/wandboard/{ =
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v2:
- Move config changes to video block
include/configs/wandboard.h | 2 ++
tools/Makefile | 3 +++
tools/logos/wandboard.bmp | Bin 0 - 22390 bytes
3 files changed, 5 insertions(+)
create mode 100644
two patches for adding the Boot Splash with Wandboard logo.
Please take a look on them and if you agree please base on this to avoid
conflicts.
(For easyness: http://patchwork.ozlabs.org/bundle/otavio/wandboard-20130527/
)
--
Otavio Salvador O.S. Systems
http
On Sun, May 26, 2013 at 09:09:22AM +0200, Heiko Schocher wrote:
[snip]
Ah, looking in drivers/dfu/dfu_mmc.c, they use dfu-layout
for switching between DFU_RAW_ADDR, DFU_FS_FAT, DFU_FS_EXT4...
After all ... should we add a DFU_UBI and add this to
drivers/dfu/dfu_nand.c?
Yes, I think we
Add support for Winbond W25Q16DW SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/winbond.c |5 +
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index e07480b..9fb4910
Add support for Winbond W25Q128FW SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/winbond.c |5 +
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c
index 3c0ca88..e07480b
Use the exact names for W25Q 0x40XX ID's flash parts, as the same
sizes of flashes comes with different ID's. so-that the distinguishes
becomes easy with this change.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/winbond.c | 10 +-
1 files changed,
This patch series consists of few corrections dones on already
commited patches, along with some updates on parts name and
few new flash parts are added.
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (6):
sf: spansion: Update the name for S25FL256S flash
sf: winbond: Add support for W25Q80BW
Add support for Winbond W25Q80BW SPI flash.
This patch corrected the flash name, nr_blocks and
also commit message header from below patch.
sf: winbond: add W25Q32
(sha1: c969abc47033d6f810d3c9dbdb994ea9d691d038)
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
As the per the ID tabl the flash is under Uniform 64-kB sector
architecture, hence updated with proper name.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/spansion.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
This patch adds a print messages while using 'sf erase' command
to make sure that how many bytes erased in flash device.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
common/cmd_sf.c |8 +++-
drivers/mtd/spi/spi_flash.c |7 ++-
2 files changed, 5
I agreed that adding new prints will increase the foot-print,
but here I have removed the verbose messages from sf_flash and add
on cmd_sf.
These are much essential for showing print messages while user
using sf erase|write|read commands.
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (2):
This patch adds a print messages while using 'sf read' and
'sf write' commands to make sure that how many bytes read/written
from/into flash device.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
common/cmd_sf.c | 26 +++---
- line over 80 characters
- insert the expression in same line
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/eon.c |3 +--
drivers/mtd/spi/ramtron.c |6 --
drivers/mtd/spi/spansion.c |3 ++-
3 files changed, 7 insertions(+), 5
- line over 80 characters
- add spaces
- add tabs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/sst.c | 32
1 files changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c
index
- line over 80 characters
- foo * bar - foo *bar
- removed unnecessary for single statement blocks.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/stmicro.c |7 +++
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git
This patch set consist of code clean-up on sf.
Thanks,
Jagan.
Jagannadha Sutradharudu Teki (5):
sf: eon|spansion|ramtron: Fix code cleanup
sf: sst: Fix code cleanup
sf: stmicro: Fix code cleanup
sf: Fix line over 80 chars cleanup
cmd_sf: Fix code cleanup
common/cmd_sf.c |
- line over 80 characters
- add tabs
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
common/cmd_sf.c |5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 0a17782..1daff70 100644
--- a/common/cmd_sf.c
+++
Code cleanup line over 80 characters.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/spi_flash.c |9 ++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 85a..d2bee3a
Missing return after memcpy is done for memory-mapped SPI flashes,
hence added retun 0 after memcpy done.
The return is missing in below patch
sf: Enable FDT-based configuration and memory mapping
(sha1: bb8215f437a7c948eec82a6abe754c226978bd6d)
Signed-off-by: Jagannadha Sutradharudu Teki
This patch corrected the nr_blocks used for W25Q32DW SPI flash.
nr_blcoks are incorrectly assigned on below patch
sf: winbond: add W25Q32DW
(sha1: 772ba15474f73adc942e817cc072b6e9750836cc)
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
drivers/mtd/spi/winbond.c |2 +-
1
On Mon, May 27, 2013 at 07:29:02PM +0300, Pantelis Antoniou wrote:
Hi
On May 27, 2013, at 7:25 PM, Wolfgang Denk wrote:
Dear Heiko Schocher,
In message 51a30f34.7030...@denx.de you wrote:
But how to handle a raw nand partition and a ubi partition on one
nand?
If ubi is a
Dear Otavio Salvador,
In message 1369672312-18774-1-git-send-email-ota...@ossystems.com.br you
wrote:
The board needs to be under a 'wandboard' vendor so we can use it to
choose the proper Boot Splash image.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
board/wandboard/{ =
Dear Otavio Salvador,
In message 1369672312-18774-2-git-send-email-ota...@ossystems.com.br you
wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/wandboard.h | 3 +++
tools/Makefile | 3 +++
tools/logos/wandboard.bmp | Bin 0 - 22390 bytes
Dear Otavio Salvador,
In message 1369673122-20455-2-git-send-email-ota...@ossystems.com.br you
wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v2:
- Move config changes to video block
include/configs/wandboard.h | 2 ++
tools/Makefile | 3
Dear Otavio Salvador,
In message 1369673122-20455-1-git-send-email-ota...@ossystems.com.br you
wrote:
The board needs to be under a 'wandboard' vendor so we can use it to
choose the proper Boot Splash image.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v2:
- Fix
Dear Tom,
In message 20130527204127.GY17119@bill-the-cat you wrote:
This _may_ be the hard part for UBI. When doing raw block writes for
NAND/MMC, we're able to write them out quickly and thus support images
larger than RAM. But for filesystems we don't support that notion in
general for
On Mon, May 27, 2013 at 6:23 PM, Wolfgang Denk w...@denx.de wrote:
Dear Otavio Salvador,
In message 1369673122-20455-1-git-send-email-ota...@ossystems.com.br
you wrote:
The board needs to be under a 'wandboard' vendor so we can use it to
choose the proper Boot Splash image.
On Mon, May 27, 2013 at 6:22 PM, Wolfgang Denk w...@denx.de wrote:
Dear Otavio Salvador,
In message 1369672312-18774-2-git-send-email-ota...@ossystems.com.br
you wrote:
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
include/configs/wandboard.h | 3 +++
tools/Makefile
The boot logo matching is now done in following way:
- use LOGO_BMP if it is set, or
- use $(BOARD).bmp if it exists in tools/logos, or
- use $(VENDOR).bmp if it exists in tools/logos, or
- use denx.bmp otherwise.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3:
-
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
---
Changes in v3:
- Remove Makefile change as it is not need anymore
Changes in v2:
- Move config changes to video block
include/configs/wandboard.h | 2 ++
tools/logos/wandboard.bmp | Bin 0 - 22390 bytes
2 files changed, 2
On Mon, May 27, 2013 at 6:27 PM, Otavio Salvador ota...@ossystems.com.brwrote:
On Mon, May 27, 2013 at 6:23 PM, Wolfgang Denk w...@denx.de wrote:
Dear Otavio Salvador,
In message 1369673122-20455-1-git-send-email-ota...@ossystems.com.br
you wrote:
The board needs to be under a
On Mon, May 27, 2013 at 11:25:52PM +0200, Wolfgang Denk wrote:
Dear Tom,
In message 20130527204127.GY17119@bill-the-cat you wrote:
This _may_ be the hard part for UBI. When doing raw block writes for
NAND/MMC, we're able to write them out quickly and thus support images
larger than
Hello, Simon.
I can push my linux-next somewhere if that would help.
It is not necessary if you are going to pick up an official release.
I have two more requests when you post version 2.
You added Makefile.kbuild at commit
Add Kconfig scripts and related material.
It seems to already
Some ARM compilers may emit code that makes unaligned accesses when
faced with constructs such as:
char mac[16] = ethaddr;
Replace this with a strcpy() call instead to avoid this. strcpy() is
used here, rather than replacing all usage of the mac variable with the
string itself, since the loop
On 05/26/2013 01:31 PM, Simon Glass wrote:
Hi Stephen,
On Thu, May 23, 2013 at 3:09 PM, Stephen Warren swar...@wwwdotorg.org
mailto:swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com mailto:swar...@nvidia.com
We know the exact property names that the code wants
On 05/26/2013 01:28 PM, Simon Glass wrote:
On Wed, May 22, 2013 at 11:48 AM, Stephen Warren swar...@wwwdotorg.org
mailto:swar...@wwwdotorg.org wrote:
From: Stephen Warren swar...@nvidia.com mailto:swar...@nvidia.com
Initialized character arrays on the stack can cause gcc to emit
Hi Tom,
On Thu, 25 Apr 2013 13:40:22 -0400, Tom Rini tr...@ti.com wrote:
While other architectures have enabled these gcc / ld options for some
time on U-Boot itself, ARM has only been doing this on SPL. Enable this
on full U-Boot as well now.
Cc: Albert ARIBAUD albert.u.b...@aribaud.net
Hi
On May 28, 2013 6:02 AM, Stephen Warren swar...@wwwdotorg.org wrote:
Some ARM compilers may emit code that makes unaligned accesses when
faced with constructs such as:
char mac[16] = ethaddr;
Recently I have seen some of this emails. I understand the problem but is
it a compiler
On 05/27/2013 10:05 PM, Michael Trimarchi wrote:
Hi
On May 28, 2013 6:02 AM, Stephen Warren swar...@wwwdotorg.org
mailto:swar...@wwwdotorg.org wrote:
Some ARM compilers may emit code that makes unaligned accesses when
faced with constructs such as:
char mac[16] = ethaddr;
Recently I
simple-framebuffer is a new device tree binding that describes a pre-
configured frame-buffer memory region and its format. The Linux kernel
contains a driver that supports this binding. Implement functions to
create a DT node (or fill in an existing node) with parameters that
describe the
Add a DT simple-framebuffer node to DT when booting the Linux kernel.
This will allow the kernel to inherit the framebuffer configuration from
U-Boot, and display a graphical boot console, and even run a full SW-
rendered X server.
Signed-off-by: Stephen Warren swar...@wwwdotorg.org
Acked-by:
Hello Wolfgang,
Am 27.05.2013 23:25, schrieb Wolfgang Denk:
Dear Tom,
In message 20130527204127.GY17119@bill-the-cat you wrote:
This _may_ be the hard part for UBI. When doing raw block writes for
NAND/MMC, we're able to write them out quickly and thus support images
larger than RAM.
Hello Tom,
Am 27.05.2013 21:21, schrieb Tom Rini:
On Sun, May 26, 2013 at 09:09:22AM +0200, Heiko Schocher wrote:
[snip]
Ah, looking in drivers/dfu/dfu_mmc.c, they use dfu-layout
for switching between DFU_RAW_ADDR, DFU_FS_FAT, DFU_FS_EXT4...
After all ... should we add a DFU_UBI and add
Hello Tom,
Am 27.05.2013 22:41, schrieb Tom Rini:
On Mon, May 27, 2013 at 07:29:02PM +0300, Pantelis Antoniou wrote:
Hi
On May 27, 2013, at 7:25 PM, Wolfgang Denk wrote:
Dear Heiko Schocher,
In message 51a30f34.7030...@denx.de you wrote:
[...]
I pretty much agree. UBI looks like it's
Dear Otavio Salvador,
In message CAP9ODKo=2zkls5ut6rgmpkudpoxm1ejevh8xv-fwdpjokxz...@mail.gmail.com
you wrote:
How do you suggest me to handle it? I'd like to have the logo file used
when building wandboard.
Vendor subdirectories are used for vendors that support several
boards, eventually
Dear Tom,
In message 20130527233735.GZ17119@bill-the-cat you wrote:
Where exactly is this 8 MB limit coming into play?
In buffering the data. We cannot write a chunk of a file to a
filesystem and then append to it, we don't have the API today.
Sorry, I still don't get it. Assuming I
Dear Heiko,
In message 51a427a8.8090...@denx.de you wrote:
Where exactly is this 8 MB limit coming into play?
You find this in drivers/dfu/dfu.c:
static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE)
dfu_buf[DFU_DATA_BUF_SIZE];
Ah, so it is a DFU
Dear Heiko,
In message 51a42ccd.1020...@denx.de you wrote:
I would imagine, but testing and implementation might show a better way,
we do UBI as name ubi ubiN volume-name, ie:
rootfs ubi ubi0 rootfs
user ubi ubi0 user-data
and so forth, and augment dfu_nand.c with UBI knowledge, ala
77 matches
Mail list logo
