We should not use "bi_dram[0].start + text_offset" as the image dst.
The text_offset maybe 0 for some images, such as XEN. Then the dst
is actually bi_dram[0].start, which maybe the location of spin table.
Let's use "images->ep & ~(ih->text_offset)" as the dst address.
Signed-off-by: Peng Fan
On Mon, Sep 12, 2016 at 05:07:58PM +0800, Peng Fan wrote:
>We should not use "bi_dram[0].start + text_offset" as the image dst.
>The text_offset maybe 0 for some images, such as XEN. Then the dst
>is actually bi_dram[0].start, which maybe the location of spin table.
>
>Let's use "images->ep &
Hi Tom,
On 25.08.2016 13:13, Stefan Roese wrote:
(Added Tom to Cc)
On 17.08.2016 09:19, Wenyou Yang wrote:
From: Cyrille Pitchen
This patch fixes the "sf probe" command. The very first SPI flash probe
passes, for instance when u-boot tries to read its environment
On 06.09.2016 20:49, Stephen Warren wrote:
On 09/06/2016 12:04 PM, Julian Scheel wrote:
On 06.09.16 18:50, Stephen Warren wrote:
On 09/05/2016 07:29 AM, Julian Scheel wrote:
This reverts commit 346451b5888c4663bccef4c5203357319aa41f99.
The pmic shall be initialised in board specific code, as
Hans de Goede wrote:
Hi,
On 09-09-16 14:10, far5893 wrote:
Hi,
i'm trying to boot a classic A33 q8 clone with uboot copied in sdcard
but nothing happen (not backlight on)
dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8 on the partitioned
sdcard for reference
In my experience the
When cold-booting the ldoio0/1 regulators are always off / the
gpios are always at tristate. But when re-booting from android these
are sometimes on. Disable them at axp_init time (iow as early as possible)
to remove this difference between a cold boot and a reboot.
Signed-off-by: Hans de Goede
Hi Stefan,
> Current description does not match the function behaviour.
>
> Signed-off-by: Stefan Brüns
> ---
> fs/fat/fat_write.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c
> index
Hi Stefan,
> fatlength is a local variable which is no more used after the
> assignment. s_name is not used in the function, save the strncpy.
>
> Signed-off-by: Stefan Brüns
> ---
> fs/fat/fat_write.c | 5 +
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
Hi Stefan,
> The code caches 6 sectors of the FAT. On FAT traversal, the old
> contents needs to be flushed to disk, but only if any FAT entries had
> been modified. Explicitly flag the buffer on modification.
>
> Currently, creating a new file traverses the whole FAT up to the first
> free
admittedly a simple question that i'll be able to test once i get
into the lab later today, but if someone knows the answer, terrific.
putting u-boot on a target board where there already exists, at a
well-known address, a set of "var=val" settings, with the format:
var1=val1 var2=val2
On Mon, Sep 12, 2016 at 05:18:53PM +0800, Peng Fan wrote:
> On Mon, Sep 12, 2016 at 05:07:58PM +0800, Peng Fan wrote:
> >We should not use "bi_dram[0].start + text_offset" as the image dst.
> >The text_offset maybe 0 for some images, such as XEN. Then the dst
> >is actually bi_dram[0].start, which
On Mon, 2016-09-12 at 09:55 +0200, Hans de Goede wrote:
> @@ -223,7 +223,14 @@ int axp_init(void)
> > if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
> > return -ENODEV;
>
> > - return 0;
> > + /*
> > + * Turn off LDOIO regulators / tri-state GPIO
Hi,
On 12-09-16 14:41, Ian Campbell wrote:
On Mon, 2016-09-12 at 09:55 +0200, Hans de Goede wrote:
@@ -223,7 +223,14 @@ int axp_init(void)
if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
return -ENODEV;
- return 0;
+ /*
+*
When cold-booting the ldoio0/1 regulators are always off / the
gpios are always at tristate. But when re-booting from android these
are sometimes on. Disable them at axp_init time (iow as early as possible)
to remove this difference between a cold boot and a reboot.
Signed-off-by: Hans de Goede
Hi,
I'm using a SinA33 dev board (Allwinner a33 SoC) and at the moment I'm
trying to boot from the eMMC.
But it fails in the following way:
*Got the following error at boot time:*
*U-Boot SPL 2016.09-rc2-00125-g6e8b42f (Sep 08 2016 - 11:00:46) DRAM: 1024
MiB Trying to boot from MMC2 MMC
On Wed, Aug 17, 2016 at 03:19:39PM +0800, Wenyou Yang wrote:
> From: Cyrille Pitchen
>
> This patch fixes the "sf probe" command. The very first SPI flash probe
> passes, for instance when u-boot tries to read its environment settings
> from a (Q)SPI memory but next
Hi Masahiro,
On 11 September 2016 at 22:42, Masahiro Yamada
wrote:
> Hi Simon,
>
>
> 2016-09-12 13:21 GMT+09:00 Simon Glass :
>> Hi Masahiro,
>>
>> On 11 September 2016 at 06:50, Masahiro Yamada
>> wrote:
>>> Hi
Hi,
On Mon, Sep 12, 2016 at 01:53:24PM +0200, Ciprian Manea wrote:
> I'm using a SinA33 dev board (Allwinner a33 SoC) and at the moment
> I'm trying to boot from the eMMC.
>
> But it fails in the following way:
>
>
> *Got the following error at boot time:*
> *U-Boot SPL
On Fri, Sep 9, 2016 at 1:27 AM, Petr Kulhavy wrote:
> This set extends the Fastboot implementation from GPT-only to any partition
> support. Further it adds a special target "mbr" (configurable) to write the
> DOS MBR.
>
> Version 2:
> Add a fourth patch into the set to move
From: Stephen Warren
This driver supports the Synopsys Designware Ethernet QoS (Quality of
Service) a/k/a eqos IP block, which is a different design than the HW
supported by the existing designware.c driver. The IP supports many
options for bus type, clocking/reset structure,
extend the binding to cover the Tegra186, which is applied for
next-20160912. So far, my changes have been acked by Lars Persson, the
original author of the binding.
Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
.../net/snps,dwc-qos-ethernet.txt | 166 +
On 09/09/2016 10:10 AM, Marcel Ziswiler wrote:
Without this patch the following error will be shown:
stdio_add_devices: Video device failed (ret=-22)
As commit ec5507707a1d1e84056a6c864338f95f6118d3ca (video: tegra: Move
to using simple-panel and pwm-backlight) states the Colibri T20 needs
On 09/12/2016 08:23 AM, Tom Rini wrote:
On Mon, Sep 12, 2016 at 11:24:35AM +0900, Masahiro Yamada wrote:
2016-09-10 7:25 GMT+09:00 Stephen Warren :
On 09/09/2016 03:14 PM, Tom Rini wrote:
On Fri, Sep 09, 2016 at 03:06:01PM -0600, Stephen Warren wrote:
On 09/09/2016
On 09/11/2016 08:24 PM, Masahiro Yamada wrote:
2016-09-10 7:25 GMT+09:00 Stephen Warren :
On 09/09/2016 03:14 PM, Tom Rini wrote:
On Fri, Sep 09, 2016 at 03:06:01PM -0600, Stephen Warren wrote:
On 09/09/2016 01:11 PM, Tom Rini wrote:
On Fri, Sep 09, 2016 at
Hi Simon,
On Mon, Sep 12, 2016 at 1:48 PM, Moritz Fischer
wrote:
> - return ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
> - , sizeof(p), NULL, 0) >= 0 ? 0 : -1;
> + ret = ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 1,
> +
Prabhakar,
On 09/11/2016 09:20 PM, Zhiqiang Hou wrote:
> From: Hou Zhiqiang
>
> Up to now, there are 3 kinds of SoC under Layerscape Chassis 2,
> such as LS1043A, LS1046A and LS1012A. But the clocks tree has a
> lot of difference, for instance the IP modules have different
On 09/11/2016 02:46 PM, Stefan Brüns wrote:
/ and /./ should reference the same file.
diff --git a/test/fs/fs-test.sh b/test/fs/fs-test.sh
+# Read 1MB from small file
+${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
I think the same issue with $FPATH ending/not-ending in / applies
On 09/11/2016 02:51 PM, Stefan Brüns wrote:
fatlength is a local variable which is no more used after the assignment.
s_name is not used in the function, save the strncpy.
The series,
Acked-by: Stephen Warren
___
U-Boot mailing
This commit fixes an issue where data is written to an
invalid memory location.
The issue has been introduced in commit
(88364387 cros: add cros_ec_driver)
Cc: Simon Glass
Cc: u-boot@lists.denx.de
Signed-off-by: Moritz Fischer
---
Changes from v1:
-
This commit fixes an issue where data is written to an
invalid memory location.
The issue has been introduced in commit
88364387 cros: add cros_ec_driver
Signed-off-by: Moritz Fischer
Cc: u-boot@lists.denx.de
---
drivers/misc/cros_ec.c | 25 ++---
1
Hi Stefan,
On Sun, Sep 11, 2016 at 10:51 PM, Stefan Brüns
wrote:
> fatlength is a local variable which is no more used after the assignment.
> s_name is not used in the function, save the strncpy.
>
> Signed-off-by: Stefan Brüns
[...]
On Fri, Sep 9, 2016 at 1:27 AM, Petr Kulhavy wrote:
> Add special target "mbr" (otherwise configurable via CONFIG_FASTBOOT_MBR_NAME)
> to write MBR partition table.
> Partitions are now searched using the generic function which finds any
> partiiton by name. For MBR the partition
On 09/09/2016 10:10 AM, Marcel Ziswiler wrote:
Enable USB gadget DFU functionality for NAND as well.
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
+/* USB DFU */
+#define CONFIG_DFU_NAND
Oh, I see this file already includes tegra-common-usb-gadget.h, so USB
On 09/11/2016 02:46 PM, Stefan Brüns wrote:
Instead of providing the full path, specify directory and filename
separately. This allows to specify intermediate directories, required
for some additional tests.
diff --git a/test/fs/fs-test.sh b/test/fs/fs-test.sh
@@ -166,11 +150,14 @@
Hey all,
I've released v2016.09 and it's now live on git and FTP and ACD (along
with PGP sig file).
To repeat some of the highlights from the rc releases:
- More DM work (MMC, of-platdata for size constrained instances, etc)
- Lots and lots of architecture / SoC / Platform updates: x86,
On 12.09.16 19:02, Stephen Warren wrote:
On 09/12/2016 01:33 AM, Julian Scheel wrote:
On 06.09.2016 20:49, Stephen Warren wrote:
On 09/06/2016 12:04 PM, Julian Scheel wrote:
On 06.09.16 18:50, Stephen Warren wrote:
On 09/05/2016 07:29 AM, Julian Scheel wrote:
This reverts commit
From: Stephen Warren
Extend the Tegra186 implementation of board_late_init() to call a per-SoC
"hook" function. This will allow SoC-specific (rather than Tegra-wide)
functionality to be implemented without the core Tegra code needing to be
aware of the details. While
On 09/12/2016 11:10 AM, Julian Scheel wrote:
On 12.09.16 19:02, Stephen Warren wrote:
On 09/12/2016 01:33 AM, Julian Scheel wrote:
On 06.09.2016 20:49, Stephen Warren wrote:
On 09/06/2016 12:04 PM, Julian Scheel wrote:
On 06.09.16 18:50, Stephen Warren wrote:
On 09/05/2016 07:29 AM, Julian
Hello,
Any comments on this patch ?
Cheers,
On Fri, 19 Aug 2016 18:12:50 +0200
Emmanuel Vadot wrote:
> Hello Alexander,
>
> The UEFI spec say that mode 0 will always be 80x25, mode 1 80x50 and other
> size will be mode >=2.
> This patch :
> - set the default size
On Fri, Sep 9, 2016 at 6:56 AM, Tom Rini wrote:
> On Fri, Sep 09, 2016 at 10:27:18AM +0200, Petr Kulhavy wrote:
>
>> Move FASTBOOT_MBR_NAME and FASTBOOT_GPT_NAME into Kconfig.
>> Add dependency on the FASTBOOT_FLASH setting (also for FASTBOOT_MBR_NAME).
>> Remove the now
On 09/09/2016 10:10 AM, Marcel Ziswiler wrote:
Without this patch the following error will be shown:
Colibri T20 # usb start
starting USB...
No controllers found
This change seems fine, but I'm concerned that the alias order causes
failures; arbitrary orders should be allowed. Have you
Hi Tom,
2016-09-12 18:21 GMT+02:00 Tom Rini :
> Hey all,
>
> I've released v2016.09 and it's now live on git and FTP and ACD (along
> with PGP sig file).
>
> To repeat some of the highlights from the rc releases:
> - More DM work (MMC, of-platdata for size constrained
Hi Petr,
On Fri, Sep 9, 2016 at 1:27 AM, Petr Kulhavy wrote:
> So far partition search by name has been supported only on the EFI partition
> table. This patch extends the search to all partition tables.
>
> Rename part_get_info_efi_by_name() to part_get_info_by_name(), move it
On 09/09/2016 10:10 AM, Marcel Ziswiler wrote:
The Tegra 2 aka T20 is not host PC capable. Therefore move the define
CONFIG_CI_UDC_HAS_HOSTPC from the generic tegra-common-usb-gadget.h
header file into resp. SoC type specific ones.
This is OK, but ...
diff --git
On 09/09/2016 10:10 AM, Marcel Ziswiler wrote:
This series addresses various issues as seen on Colibri T20. Please
note that for successful Ethernet operation not only on Colibri T20
but also on Colibri T30 the following patch will still need applying
as well:
[PATCH] net: asix: Fix ASIX 88772B
On 09/12/2016 08:03 AM, Julian Scheel wrote:
On 06.09.2016 19:15, Stephen Warren wrote:
diff --git a/board/avionic-design/common/meerkat.c
b/board/avionic-design/common/meerkat.c
+void pinmux_init(void)
+{
+pinmux_set_tristate_input_clamping();
That should be
On 09/12/2016 01:33 AM, Julian Scheel wrote:
On 06.09.2016 20:49, Stephen Warren wrote:
On 09/06/2016 12:04 PM, Julian Scheel wrote:
On 06.09.16 18:50, Stephen Warren wrote:
On 09/05/2016 07:29 AM, Julian Scheel wrote:
This reverts commit 346451b5888c4663bccef4c5203357319aa41f99.
The pmic
From: Stephen Warren
Tegra186 includes a Synopsys DWC EQoS (Ethernet) device. Add this to the
Tegra186 SoC DT so that boards can make use of it.
Signed-off-by: Stephen Warren
---
arch/arm/dts/tegra186.dtsi | 20
1 file changed, 20
From: Stephen Warren
On Tegra186, the bootloader which runs before U-Boot passes the Ethernet
MAC address to U-Boot using device tree. Extract this value and write it
to the environment, so that the Ethernet uclass picks it up and uses it
for the built-in Ethernet device.
From: Stephen Warren
Enable the Ethernet device in DT, provide board-specific configuration,
and enable the driver in Kconfig.
Signed-off-by: Stephen Warren
---
arch/arm/dts/tegra186-p2771-.dtsi | 5 +
configs/p2771--000_defconfig | 1 +
On Fri, Sep 9, 2016 at 1:27 AM, Petr Kulhavy wrote:
> In both DOS and ISO partition tables the same code to create partition name
> like "hda1" was repeated.
>
> Code moved to into a new function part_set_generic_name() in part.c and
> optimized.
> Added recognition of MMC and SD
On Montag, 12. September 2016 12:39:35 CEST you wrote:
> On 09/11/2016 02:46 PM, Stefan Brüns wrote:
> > This is a regression test for a crash happening if the first dirent
> > in the block matches. Code tried to access a predecessor entry which
> > does not exist.
> > The crash happened for any
Panto,
On 08/02/2016 02:32 AM, Yangbo Lu wrote:
> For CMD with busy response, the eSDHC driver would poll DAT0 until
> CMD completion rather than polling IRQSTAT. So, don't set
> XFERTYP_RSPTYP_48_BUSY to avoid interrupts (DTOE or TC) in IRQSTAT.
>
> Signed-off-by: Yangbo Lu
>
On Montag, 12. September 2016 12:44:08 CEST you wrote:
> On 09/11/2016 02:46 PM, Stefan Brüns wrote:
> > / and /./ should reference the same file.
> >
> > diff --git a/test/fs/fs-test.sh b/test/fs/fs-test.sh
> >
> > +# Read 1MB from small file
> > +${PREFIX}load host${SUFFIX} $addr
Add driver model support while retaining the existing legacy code.
This allows the driver to support boards that have converted to
driver model as well as those that have not.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v9:
-
The at91-pmc and at91-sckc aren't the clock providers, change their
class ID from UCLASS_CLK to UCLASS_SIMPLE_BUS, they also don't
need to bind the child nodes explicitly, the .post_bind callback
of simple_bus uclass will do it for them.
Signed-off-by: Wenyou Yang
Add ATMEL_USART option to support to enable the Atmel usart driver
from Kconfig.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
drivers/serial/Kconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index
The patch set is to add support to enable an early debug UART
for debugging. And add ATMEL_USART option to enable the Atmel
usartdriver from Kconfig.
Changes in v2:
- Collect the Reviewed-by tag.
Wenyou Yang (2):
serial: Kconfig: Add ATMEL_USART option
serial: atmel_usart: Support enable an
Add support to enable an early debug UART for debugging.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2:
- Collect the Reviewed-by tag.
drivers/serial/Kconfig | 7 +++
drivers/serial/atmel_usart.c | 22
Add mmc_init() in the mmc preinit phrase to get the device's
information. Otherwise, if the environment variables are from
the mmc device, it will fail with "** Bad device size - mmc 1 **".
Signed-off-by: Wenyou Yang
---
Changes in v2:
- Add the bracket for #if defined.
Since the 'clk_client.h' doesn't exist, it should be 'clk.h'.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2:
- Collect Reviewed-by tag.
drivers/i2c/at91_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Enable an early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2:
- Collect Reviewed-by tags.
board/atmel/sama5d2_xplained/sama5d2_xplained.c |
Since the introduction of pinctrl and clk driver, and the dts file,
remove unneeded the pin configurations and the clock enabling code.
Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
---
Changes in v2: None
If 'ethaddr' is not set, we will get the ethernet address from AT24MAC,
and set it to 'ethaddr' variable.
Signed-off-by: Wenyou Yang
Signed-off-by: Songjun Wu
---
Changes in v2: None
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 51
On 09/11/2016 07:25 AM, Masahiro Yamada wrote:
Hi Paul,
2016-09-09 17:01 GMT+09:00 Paul Burton :
On 09/09/16 04:15, Masahiro Yamada wrote:
2016-09-08 15:47 GMT+09:00 Paul Burton :
The implementations of clk_get_by_index & clk_get_by_name are
Hi Tom,
> Hey all,
>
> I've released v2016.09 and it's now live on git and FTP and ACD (along
> with PGP sig file).
>
> To repeat some of the highlights from the rc releases:
> - More DM work (MMC, of-platdata for size constrained instances, etc)
> - Lots and lots of architecture / SoC /
Convert to use the drivers which support the driver model and use the
device tree. And add the support to enable an early debug UART for
debugging.
It is based on the following patches:
- [PATCH v2] i2c: at91_i2c: Fix the wrong include file
Move the config options from the include/configs/sama5d2_xplained.h
to configs/sama5d2_xplained_*_defconfig.
Signed-off-by: Wenyou Yang
---
Changes in v2: None
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 2 ++
configs/sama5d2_xplained_mmc_defconfig | 31
Due to the peripheral and generated clock driver improvement,
remove the unneccessary clock calling.
Signed-off-by: Wenyou Yang
---
drivers/mmc/atmel_sdhci.c | 27 ++-
1 file changed, 2 insertions(+), 25 deletions(-)
diff --git
Due to the peripheral clock driver improvement, remove the
unneccessary clock calling.
Signed-off-by: Wenyou Yang
---
drivers/usb/host/ehci-atmel.c | 15 ---
1 file changed, 15 deletions(-)
diff --git a/drivers/usb/host/ehci-atmel.c
Change the error return value -ENODEV from to -EINVAL for more
reasonable.
Signed-off-by: Wenyou Yang
---
drivers/i2c/at91_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/at91_i2c.c b/drivers/i2c/at91_i2c.c
index 73f29e3..472420b
On 09/11/2016 02:46 PM, Stefan Brüns wrote:
This is a regression test for a crash happening if the first dirent
in the block matches. Code tried to access a predecessor entry which
does not exist.
The crash happened for any block, but "." is always the first entry in
the first directory block
Hi Stephen,
> -Original Message-
> From: Stephen Warren [mailto:swar...@wwwdotorg.org]
> Sent: 2016年9月3日 1:38
> To: Wenyou Yang - A41535
> Cc: swar...@nvidia.com; u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for
>
Due to the peripheral clock driver improvement, remove the
unneccessary clock calling.
Signed-off-by: Wenyou Yang
---
drivers/gpio/atmel_pio4.c | 12
1 file changed, 12 deletions(-)
diff --git a/drivers/gpio/atmel_pio4.c b/drivers/gpio/atmel_pio4.c
index
For the peripheral clock, provide the clock ops for the clock
provider, such as spi0_clk. The .of_xlate is to get the clk->id,
the .enable is to enable the spi0 peripheral clock, the .get_rate
is to get the clock frequency.
The driver for periph32ck node is responsible for recursively
binding its
Due to the peripheral clock driver improvement, remove the
unneccessary clock calling.
Signed-off-by: Wenyou Yang
---
drivers/i2c/at91_i2c.c | 16
1 file changed, 16 deletions(-)
diff --git a/drivers/i2c/at91_i2c.c b/drivers/i2c/at91_i2c.c
index
In order to make clk->dev available in ops->of_xlate() to get the
clock ID from the 'reg' property of the clock node, assign the
clk->dev before calling ops->of_xlate().
Signed-off-by: Wenyou Yang
---
drivers/clk/clk-uclass.c | 3 +++
1 file changed, 3 insertions(+)
Add the clock ops for such as spi0_clk, which is the real clock
provider, instead of periph32ck, which only recursively bind its
children as clk devices. Also update the clocks called in the
drivers.
Wenyou Yang (7):
clk: clk-uclass: Assign clk->dev before call .of_xlate
clk: at91: Improve
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
board/ti/am335x/Kconfig | 3 +++
board/ti/common/Kconfig | 3 +++
This option is not used. Drop it.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Drop CONFIG_SPL_PINCTRL_SUPPORT
configs/chromebook_jerry_defconfig | 1 +
configs/evb-rk3288_defconfig | 1 +
configs/fennec-rk3288_defconfig| 1 +
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
configs/am43xx_evm_usbhost_boot_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv7/omap3/Kconfig | 3 +++
arch/arm/cpu/armv7/omap4/Kconfig | 3 +++
arch/arm/cpu/armv7/omap5/Kconfig
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
configs/am43xx_evm_usbhost_boot_defconfig | 1 +
include/configs/am43xx_evm.h | 3 ---
2 files changed, 1 insertion(+), 3 deletions(-)
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv8/zynqmp/Kconfig| 3 +++
arch/arm/mach-socfpga/Kconfig| 3 +++
arch/arm/mach-zynq/Kconfig
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
arch/arm/mach-socfpga/Kconfig | 3 +++
board/ti/am335x/Kconfig | 3 +++
Hi Simon,
2016-09-13 14:18 GMT+09:00 Simon Glass :
> This option is not used. Drop it.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v3: None
> Changes in v2:
> - Drop CONFIG_SPL_PINCTRL_SUPPORT
>
> configs/chromebook_jerry_defconfig | 1 +
>
Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3:
- Rebase on master
Changes in v2:
- Lots of work to make use of common values across multiple boards
- Added a patch to change
Move this option to Kconfig and tidy up existing uses.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
configs/am43xx_evm_ethboot_defconfig | 3 ++-
configs/pcm051_rev1_defconfig| 1 +
configs/pcm051_rev3_defconfig| 1 +
This converts the following to Kconfig:
CONFIG_SPL_NET_VCI_STRING
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Add new patch to convert CONFIG_SPL_NET_VCI_STRING
configs/am43xx_evm_ethboot_defconfig | 1 +
configs/pcm051_rev1_defconfig| 1 +
Hello Tom,
Am 12.09.2016 um 18:21 schrieb Tom Rini:
Hey all,
I've released v2016.09 and it's now live on git and FTP and ACD (along
with PGP sig file).
To repeat some of the highlights from the rc releases:
- More DM work (MMC, of-platdata for size constrained instances, etc)
- Lots and lots
This option does not exist in U-Boot. Drop it.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
include/configs/rk3288_common.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index
Update the defconfig files to match their canonical form, as produced by
'make safedefconfig'.
This is the result of running 'tools/moveconfig.py -s' on the tree.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
configs/am43xx_hs_evm_defconfig | 2 +-
This series moves all the CONFIG_SPL_..._SUPPORT options to Kconfig and
fixes up existing boards to continue to build.
It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may
be superseded. It has taken me a while to
There are a few options which use lower case. We should use upper case for
all CONFIG options.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/arm926ejs/spear/timer.c | 2 +-
configs/spear300_defconfig | 2 +-
A few boards define this in a header file which is incorrect. It means that
Kconfig options that rely on this cannot be used. Move it.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
arch/arm/include/asm/fsl_secure_boot.h | 1 -
The secure boot header files incorrectly define SPL options only if
CONFIG_SPL_BUILD is defined. This means that the options are only enabled
in an SPL build, and not with a normal 'make xxx_defconfig'. This means
that moveconfig.py cannot work, since it sees the options as disabled even
when they
At present it is not easy to use moveconfig from a script since it asks
for user input a few times. Add a -y option to skip this and assume that
'y' was entered.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2:
- Add some notes on this option to moveconfig.py
Some of the SPL options have TPL equivalents. Add these to Kconfig so that
we can convert these options over to work from Kconfig.
Signed-off-by: Simon Glass
---
Changes in v3: None
Changes in v2: None
common/spl/Kconfig | 67
At present TPL uses the same options as SPL support. In a few cases the board
config enables or disables the SPL options depending on whether
CONFIG_TPL_BUILD is defined.
With the move to Kconfig, options are determined for the whole build and
(without a hack like an #undef in a header file)
The moveconfig tool is quite clever and generally produces results that
are suitable for sending as a patch without further work. The main required
step is to add the changes to a commit.
Add an option to do this automatically. This allows moveconfig to be used
from a script to convert multiple
1 - 100 of 130 matches
Mail list logo