[U-Boot] [PATCH 1/2] drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED

remove unused code under CONFIG_UTIL_PE_DISABLED Signed-off-by: Calvin Johnson --- drivers/net/pfe_eth/pfe.c | 98 -- drivers/net/pfe_eth/pfe_cmd.c | 16 +-- drivers/net/pfe_eth/pfe_driver.c | 15 --

[U-Boot] [PATCH 0/2] Remove unused pfe_eth code

This patch series cleans up unused PFE code under CONFIG_PFE_WARN_WA and CONFIG_UTIL_PE_DISABLED. Calvin Johnson (2): drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA drivers/net/pfe_eth/pfe.c

[U-Boot] [PATCH 3/3] drivers: net: pfe_eth: cleanup typos and indent

Typos are corrected. Some sentences are rephrased. Proper indentation added. Signed-off-by: Calvin Johnson --- drivers/net/pfe_eth/pfe_driver.c | 33 +++-- drivers/net/pfe_eth/pfe_eth.c| 12 ++-- 2 files changed, 21 insertions(+),

[U-Boot] [PATCH 2/3] drivers: net: pfe_eth: use writel/readl to access hw bds

writel/readl accessors should be used to access hardware buffer descriptors. Signed-off-by: Calvin Johnson Signed-off-by: Anjaneyulu Jagarlmudi --- drivers/net/pfe_eth/pfe_driver.c | 70 1 file changed,

[U-Boot] [PATCH 1/3] drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing

Create pfe_rx_done function to clear buffer descriptor after the packet is processed by the network stack. Signed-off-by: Calvin Johnson Signed-off-by: Anjaneyulu Jagarlmudi --- drivers/net/pfe_eth/pfe_driver.c | 35

Re: [U-Boot] [PATCH] ni: Add NIZYNQ platform

Hi, On 22.11.2017 04:06, Wilson Lee wrote: > Hi Michal, > > On Wed, 2017-11-08 at 07:27 +0100, Michal Simek wrote: >> On 8.11.2017 03:54, Wilson Lee wrote: >>> >>> Initial platform creation for NIZYNQ. >>> >>> Signed-off-by: Joe Hershberger >>> Signed-off-by: Keng Soon

Re: [U-Boot] U-Boot proper(not SPL) relocate option

On Wed, Nov 22, 2017 at 2:59 PM, Kever Yang wrote: > Hi Lukasz, > > > Thanks for your quick comments on this topic. > On 11/21/2017 06:29 PM, Lukasz Majewski wrote: >> >> Hi Kever, >> >>> Hi Guys, >>> >>> I try to understand why we need to do the relocate in

[U-Boot] [PATCH 2/2] drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA

remove unused code under CONFIG_PFE_WARN_WA Signed-off-by: Calvin Johnson --- drivers/net/pfe_eth/pfe_cmd.c | 28 +--- 1 file changed, 1 insertion(+), 27 deletions(-) diff --git a/drivers/net/pfe_eth/pfe_cmd.c b/drivers/net/pfe_eth/pfe_cmd.c

[U-Boot] [PATCH 0/3] ls1012a: fix tftp failure

This patch series fixes bug which fails tftp sometimes while using the pfe interfaces and also has some code clean up. Calvin Johnson (3): drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing drivers: net: pfe_eth: use writel/readl to access hw bds drivers: net:

Re: [U-Boot] [U-Boot, v3, 1/3] rockchip: make boot_mode related codes reused across all platforms

Andy, > On 21 Nov 2017, at 01:48, Andy Yan wrote: > > Hi Philipp: > > > On 2017年11月20日 22:50, Philipp Tomsich wrote: >> >> >> On Wed, 11 Oct 2017, Andy Yan wrote: >> >>> setup_boot_mode function use the same logic but different >>> mode register address across all

[U-Boot] [PATCH v6 1/2] arm64: sun50i-h5.dtsi : update to kernel 4.14

last Kernel commit of sun50i-h5.dtsi d86e63e1f0b7 Signed-off-by: Antony Antony --- Changes v1->v2 removed memory {}, compatible ="allwinner,sun5i-a13-mmc" remove CONFIG_SPL_SPI_FLASH_SUPPORT=y and CONFIG_SPL_SPI_SUNXI=y (no SPI) remove CONFIG_SD_BOOT=y Changes v2->v3

Re: [U-Boot] [PATCH v2 1/1] x86: don't compare pointers to 0

On Tue, Nov 21, 2017 at 2:11 PM, Bin Meng wrote: > On Tue, Nov 21, 2017 at 2:45 AM, Heinrich Schuchardt > wrote: >> x86_vendor_name is defined as >> >> static const char *const x86_vendor_name[] >> >> So its elements should not be compared to 0. >> >>

Re: [U-Boot] [PATCH] imx: Unify CONFIG_BOOTDELAY

Hi Fabio, > In order to provide a consistent user experience for imx board users, > remove the custom CONFIG_BOOTDELAY values from defconfig files, so > that all boards can use the default two second delay. Reviewed-by: Lukasz Majewski > > Signed-off-by: Fabio Estevam

[U-Boot] U-Boot proper(not SPL) relocate option

Hi Guys, I try to understand why we need to do the relocate in U-Boot. From the document README/crt0.S, I think the relocation feature comes from some SoC have limited SRAM whose size is enough to load the whole U-Boot, but not enough to run all the drivers. I don't know how many

Re: [U-Boot] [U-Boot,V9,1/4] usb: rockchip: add the rockusb gadget

On Mon, 20 Nov 2017 16:54:51 +0100 "Dr. Philipp Tomsich" wrote: > Kever & Eddie, > > > On 2 Oct 2017, at 12:51, Dr. Philipp Tomsich > > wrote: > > > > +Kever, +Eddie > > > > Kever & Eddie, > > > >> On 2 Oct

Re: [U-Boot] [PATCH v5 1/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support

On Tue, Nov 21, 2017 at 11:59:42AM +0530, Jagan Teki wrote: > On Fri, Nov 17, 2017 at 3:09 PM, Antony Antony wrote: > > Add initial DT for NanoPi NEO Plus2 by FriendlyARM > > - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU > > - 1 GB DDR3 RAM > > - 8GB eMMC

Re: [U-Boot] [PATCH] arm: zynq: Remove double const qualifier

Hi Michal, I'm sorry to disturb you and others but it looks like you've removed a bit too much. There are two different types of usage of the "const" modifier in the areas that are touched by your patch: 1) for function prototypes/implementation - "const" before the function name is senseless,

[U-Boot] [PATCH v6 2/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support

Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A

Re: [U-Boot] [PATCH 1/1] ubifs: no NULL check needed before free

Hi Heinrich and Heiko, do you see anything strange in this code (it was more obvious before the patch but it can still be spotted)? I should say that it's too late to check for "file != NULL" after the "file->private_data" dereference. Maybe it should look like this: if (file)

Re: [U-Boot] [PATCH] mtd: cfi: Fix checking status register feature

On 11/21/2017 03:52 AM, York Sun wrote: > On 11/18/2017 11:09 AM, York Sun wrote: >> Commit 72443c7f7d21 ("mtd: cfi: Add support for status register >> polling") added a feature check to determine if status register >> is available for certain flash chips. The "lower software bits" >> register

Re: [U-Boot] [RFC PATCH] usb: ehci: do not invalidate a NULL buffer

On 17.11.2017 16:04, Marek Vasut wrote: On 11/17/2017 03:28 PM, Dirk Behme wrote: Its a valid use case to call ehci_submit_async() with a NULL buffer with length 0. E.g. from usb_set_configuration(). As invalidate_dcache_range() isn't able to judge if the address NULL is valid or not

[U-Boot] U-Boot proper(not SPL) relocate option

Hi Guys, I try to understand why we need to do the relocate in U-Boot. From the document README/crt0.S, I think the relocation feature comes from some SoC have limited SRAM whose size is enough to load the whole U-Boot, but not enough to run all the drivers. I don't know how many

Re: [U-Boot] [PATCH v3 09/14] log: Add a 'log level' command

On Mon, 20 Nov 2017 15:33:30 -0700 Simon Glass wrote: > Add a command for adjusting the log level. > Reviewed-by: Lukasz Majewski > Signed-off-by: Simon Glass > Reviewed-by: Bin Meng > --- > > Changes in v3: None >

Re: [U-Boot] [PATCH v3 10/14] log: Add a test command

On Mon, 20 Nov 2017 15:33:31 -0700 Simon Glass wrote: > Add a command which exercises the logging system. > Reviewed-by: Lukasz Majewski > Signed-off-by: Simon Glass > --- > > Changes in v3: None > Changes in v2: > - Fix function called

[U-Boot] re-use dm data for pre-relocate and post-relocate

Hi Simon, In order to make people easier to maintain a U-Boot for product, we want to re-use the dtb from kernel. Some peripheral like power/pmic and display panel, key, charger which need work in U-Boot and may different in different product, we want to make people only maintain kernel

Re: [U-Boot] [PATCH v3 04/14] Move debug and logging support to a separate header

On Mon, 20 Nov 2017 15:33:25 -0700 Simon Glass wrote: > Before adding new features, move these definitions to a separate > header to avoid further cluttering common.h. > > Signed-off-by: Simon Glass > Reviewed-by: Bin Meng

Re: [U-Boot] [PATCH v3 07/14] log: Add an implemention of logging

On Mon, 20 Nov 2017 15:33:28 -0700 Simon Glass wrote: > Add the logging header file and implementation with some configuration > options to control it. Despite one question - Reviewed-by: Lukasz Majewski > > Signed-off-by: Simon Glass >

Re: [U-Boot] [PATCH v3 08/14] log: Add a console driver

On Mon, 20 Nov 2017 15:33:29 -0700 Simon Glass wrote: > It is useful to display log messages on the console. Add a simple > driver to handle this. > > Note that this driver outputs to the console, which may be serial or > video. It does not specifically select serial output.

Re: [U-Boot] [PATCH v3 11/14] log: Plumb logging into the init sequence

On Mon, 20 Nov 2017 15:33:32 -0700 Simon Glass wrote: > Set up logging both before and after relocation. > Reviewed-by: Lukasz Majewski > Signed-off-by: Simon Glass > Reviewed-by: Bin Meng > --- > > Changes in v3:

Re: [U-Boot] [PATCH v3 12/14] log: sandbox: Enable logging

On Mon, 20 Nov 2017 15:33:33 -0700 Simon Glass wrote: > Enable all logging features on sandbox so that the tests can be run. > Reviewed-by: Lukasz Majewski > Signed-off-by: Simon Glass > Reviewed-by: Bin Meng > --- >

Re: [U-Boot] [PATCH v3 13/14] log: test: Add a pytest for logging

On Mon, 20 Nov 2017 15:33:34 -0700 Simon Glass wrote: > Add a test which tries out various filters and options to make sure > that logging works as expected. > Reviewed-by: Lukasz Majewski > Signed-off-by: Simon Glass > --- > > Changes

Re: [U-Boot] [PATCH v3 14/14] log: Add documentation

On Mon, 20 Nov 2017 15:33:35 -0700 Simon Glass wrote: > Add documentation for the log system. > > Signed-off-by: Simon Glass > Reviewed-by: Bin Meng > --- > > Changes in v3: > - Rebase to master > > Changes in v2: > - Drop the

Re: [U-Boot] U-Boot proper(not SPL) relocate option

Hi Kever, > Hi Guys, > > I try to understand why we need to do the relocate in U-Boot. > From the document README/crt0.S, I think the relocation feature comes > from some SoC have limited SRAM whose size is enough to load the whole > U-Boot, but not enough to run all the drivers. > >

Re: [U-Boot] [PATCH 1/1] ubifs: no NULL check needed before free

On 11/21/2017 10:20 AM, Alex Sadovsky wrote: Hi Heinrich and Heiko, do you see anything strange in this code (it was more obvious before the patch but it can still be spotted)? I should say that it's too late to check for "file != NULL" after the "file->private_data" dereference. Maybe it

Re: [U-Boot] [PATCH 04/11] tools: mkimage: Extend mkimage to also include pmufw

On 20.11.2017 16:38, Simon Glass wrote: > Hi Michal, > > On 6 November 2017 at 05:02, Michal Simek wrote: >> This is generated command line when PMUFW_INIT_FILE is setup. >> >> ./tools/mkimage -T zynqmpimage -R ./"" -n >> ./"board/xilinx/zynqmp/pmufw.bin" -d

Re: [U-Boot] [PATCH] efi_loader: Fix disk dp's for pre-DM/legacy devices

On Tue, Nov 21, 2017 at 04:59:33PM +1100, Jonathan Gray wrote: > On Sat, Nov 18, 2017 at 03:25:29PM +1100, Jonathan Gray wrote: > > > > While U-Boot 2017.11 release works with vexpress/qemu with the > > efi loader it is broken on at least rpi_3 and tinker-rk3288. > > MEDIA_DEVICE is not found

[U-Boot] [PATCH v2 07/11] arm64: zynqmp: Use u32 type instead of uint32_t

Warning is reported by checkpatch. Signed-off-by: Michal Simek --- Changes in v2: None board/xilinx/zynqmp/zynqmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index

[U-Boot] [PATCH v2 04/11] tools: mkimage: Extend mkimage to also include pmufw

The patch is adding external pmufw "Platform Management Unit firmware" to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable to read and boot the system. pmufw is copied to the header data section follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze) and SPL runs

[U-Boot] [PATCH v2 01/11] arm64: zynqmp: Remove slcr with mio status pin detection

This code is not used on this platform and it is not called. Signed-off-by: Michal Simek --- Changes in v2: None arch/arm/cpu/armv8/zynqmp/Makefile | 1 - arch/arm/cpu/armv8/zynqmp/slcr.c | 63

[U-Boot] [PATCH v2 03/11] arm64: zynqmp: Provide a Kconfig option to use specified memory for MMU table

From: Siva Durga Prasad Paladugu This patch provides a Kconfig option to use specified memory for MMU table using reserve_mmu platform specific routine. Here we used TCM space for MMU table. Signed-off-by: Siva Durga Prasad Paladugu

[U-Boot] [PATCH v2 09/11] arm64: zynqmp: Add new ID for RFSoC

This ID is available on zc1254. Signed-off-by: Michal Simek --- Changes in v2: None board/xilinx/zynqmp/zynqmp.c | 24 1 file changed, 24 insertions(+) diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index

[U-Boot] [PATCH v2 05/11] arm64: zynqmp: Enable config DEFINE_TCM_OCM_MMAP if CONFIG_MP defined

From: Siva Durga Prasad Paladugu This modifies default value of config DEFINE_TCM_OCM_MMAP to yes if CONFIG_MP is defined MP supports needs OCM and TCM part of memory map. Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

[U-Boot] [PATCH v2 06/11] arm64: zynqmp: Add SD1 level shifter mode to alternative selection

Extend Kconfig to cover SD1 level shifter mode. Reported-by: Jason Wu Signed-off-by: Michal Simek --- Changes in v2: None arch/arm/cpu/armv8/zynqmp/Kconfig | 4 1 file changed, 4 insertions(+) diff --git

[U-Boot] [PATCH v2 08/11] arm64: zynqmp: Add support for CG/EG/EV device detection

Version string has unused fields 31:20 which can be used for exporting 9 bits from efuse IPDISABLE regs to recognize eg/cg/ev devices. These efuse bits are setup for certain devices. Signed-off-by: Michal Simek --- Changes in v2: None

[U-Boot] [PATCH v2 02/11] arm64: zynqmp: mp: Correct the R5 release sequence

From: Siva Durga Prasad Paladugu This patch corrects the R5 release sequence by adding the below steps. 1. Flush dcache to ensure that image loaded into memory. 2. Keep R5 reset just to ensure R5 in reset. 3. Disable caches before accessing TCM as with out this

[U-Boot] [PATCH v2 10/11] arm64: zynqmp: Enable debug uart for zc1751 dc5

Showing uart earlier. Signed-off-by: Michal Simek --- Changes in v2: None configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 5 + 1 file changed, 5 insertions(+) diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig

[U-Boot] [PATCH v2 11/11] arm64: zynqmp: Wire QSPI boot mode for SPL

From: Michal Simek ZynqMP qspi driver is on the way to mainline Signed-off-by: Michal Simek --- Changes in v2: None arch/arm/cpu/armv8/zynqmp/spl.c | 5 + 1 file changed, 5 insertions(+) diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c

[U-Boot] [PATCH] efi_loader: initialise partition_signature memory

Zero partition_signature in the efi_device_path_hard_drive_path structure when signature_type is zero. This is required so that efi_dp_match() will work as expected when doing memcmp() comparisons. Corrects a problem where the loaded image protocol would not return a device path with

Re: [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor

On Tuesday 21 November 2017 06:14 PM, Tom Rini wrote: > On Tue, Nov 14, 2017 at 04:12:31PM +0530, Faiz Abbas wrote: >> The dra7xx series of SOCs contain a temperature sensor and an >> associated analog-to-digital converter (ADC) which produces >> an output which is proportional to the SOC

Re: [U-Boot] dra7x: fastboot: Increase recovery partition size

On Wed, Nov 08, 2017 at 05:12:56PM -0600, Praneeth Bajjuri wrote: > As per current android recommendation > https://source.android.com/devices/architecture/kernel/modular-kernels > > 1. Android recovery mode should contain both SOC and ODM > kernel modules in the recovery partition. > > 2. If a

Re: [U-Boot] [U-Boot, v2, 1/1] scripts/ld-version.sh: regular expression compile fails

On Wed, Nov 08, 2017 at 11:44:55PM +0100, Heinrich Schuchardt wrote: > ld --version | scripts/ld-version.sh > fails with > awk: scripts/ld-version.sh: > line 4: regular expression compile failed (missing '(') > .*) > > So let's refresh the script from Linux kernel v4.14-rc8. > > Signed-off-by:

[U-Boot] [PATCH 5/5] mmc: all hosts support 1-bit bus width and legacy timings

Make sure that those basic capabilities are advertised by the host. Signed-off-by: Jean-Jacques Hiblot --- drivers/mmc/mmc.c | 15 ++- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 67f21ff..ec1dc49 100644

[U-Boot] [PATCH 2/3] arm: Add support of updating dts before fix-up

"ethernet" node fix-up for device tree happens before Linux boot. There can be requirement of updating "ethernet" node even before fix-up. So, add support of updating "ethernet" node. Signed-off-by: Prabhakar Kushwaha --- arch/arm/lib/bootm-fdt.c | 12

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On Tue, 2017-11-21 at 17:23 +, York Sun wrote: > CAUTION: This email originated from outside of the organization. Do not click > links or open attachments unless you recognize the sender and know the > content is safe. > > > On 11/21/2017 09:18 AM, Joakim Tjernlund wrote: > > On Tue,

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On Tue, 2017-09-12 at 19:56 +0200, Joakim Tjernlund wrote: > Most FSL PCIe controllers expects 333 MHz PCI reference clock. > This clock is derived from the CCB but in many cases the ref. > clock is not 333 MHz and a divisor needs to be configured. > > This adds PEX_CCB_DIV #define which can be

Re: [U-Boot] [PATCH 1/3] common: Fix-up MAC addr in dts by fetching env variable serially

On 11/21/2017 08:26 AM, Prabhakar Kushwaha wrote: > Current implementation of MAC address fix-up of device tree uses > tailing number behind "ethernet" found in "/aliases". It is not > necessary for trailing number of “ethernet” to be sequential. There > can be hole in between or any node

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On 11/21/2017 09:29 AM, Joakim Tjernlund wrote: > On Tue, 2017-11-21 at 17:23 +, York Sun wrote: >> CAUTION: This email originated from outside of the organization. Do not >> click links or open attachments unless you recognize the sender and know the >> content is safe. >> >> >> On

[U-Boot] [PATCH 3/3] boards: ls1046ardb: disable unavailable "ethernet" node in dts

Linux device tree contains "ethernet" node for all possible interface supported by SoC i.e. LS1046A. It is not necessary for a SerDes protocol to support all possible interface. So disable unavailable "ethernet" node in device tree. Also, enable FDT_SEQ_MACADDR_FROM_ENV to fetch MAC address

Re: [U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229

On 11/20/2017 03:25 PM, Heiko Stübner wrote: > Hi Kever, > > Am Mittwoch, 6. September 2017, 10:14:27 CET schrieb Kever Yang: >> Add some generic options for TPL support for arm 32bit, and then >> and TPL support for rk3229(cortex-A7), and then add OPTEE support >> in SPL. > > I was now finally

[U-Boot] [PATCH v2] board: freescale: ls1012a: LS1012A-2G5RDB board support

LS1012A-2G5RDB belongs to LS1012A family with features 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi, DDR, eMMC, QuadSPI, UART Signed-off-by: Bhaskar Upadhaya --- Changes for V2: 1. Use existing code base of RDB 2. Correct Copyrights Depends on

[U-Boot] [PATCH 1/3] common: Fix-up MAC addr in dts by fetching env variable serially

Current implementation of MAC address fix-up of device tree uses tailing number behind "ethernet" found in "/aliases". It is not necessary for trailing number of “ethernet” to be sequential. There can be hole in between or any node disabled. So provide support device tree fix-up of “ethernent”

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On 11/21/2017 09:18 AM, Joakim Tjernlund wrote: > On Tue, 2017-09-12 at 19:56 +0200, Joakim Tjernlund wrote: >> Most FSL PCIe controllers expects 333 MHz PCI reference clock. >> This clock is derived from the CCB but in many cases the ref. >> clock is not 333 MHz and a divisor needs to be

[U-Boot] [PATCH 0/3] Update MAC address in "ethernet" node of Linux device tree

Current implementation of MAC address fix-up of device tree uses tailing number behind "ethernet" found in "/aliases". It is not necessary for trailing number of “ethernet” to be sequential. There can be hole in between or any node disabled. hole can be created based on SerDes protocol supported

[U-Boot] [PATCH 00/22] mtd: nand: imports NAND core updates from Linux 4.15-rc1 and sync Denali driver

My motivation is to complete syncing the Denali driver with Linux. However, the last sync of NAND core was Linux 4.6 so a lots of parts are missing in U-Boot. I imported the following: - NAND_ECC_MAXIMIZE flag - nand_data_interface - sync nand_timings - NAND_ECC_CUSTOM_PAGE_ACCESS -

Re: [U-Boot] [U-Boot, 1/1] kconfig/symbol.c: use correct pointer type argument for sizeof

On Wed, Nov 08, 2017 at 10:13:54PM +0100, Heinrich Schuchardt wrote: > sym_arr is of type struct symbol **. > So in malloc we need sizeof(struct symbol *). > > The problem was indicated by coccinelle. > > Signed-off-by: Heinrich Schuchardt Applied to u-boot/master, thanks!

Re: [U-Boot] README: update mailing list url

On Tue, Nov 14, 2017 at 10:56:42PM -0800, S. Lockwood-Childs wrote: > Old url currently returns 403; modify to url that actually works > with current state of the list server > > Signed-off-by: S. Lockwood-Childs Applied to u-boot/master, thanks! -- Tom signature.asc

Re: [U-Boot] [U-Boot, v5, 2/3] ARM: dts: OMAP5+: Add support for bandgap sensor in SPL

On Tue, Nov 14, 2017 at 04:12:32PM +0530, Faiz Abbas wrote: > Mark bandgap node as uboot,dm-spl so that it can be accessed in spl > > Signed-off-by: Faiz Abbas > Reviewed-by: Simon Glass > Reviewed-by: Tom Rini Applied to

Re: [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor

On Tue, Nov 14, 2017 at 04:12:31PM +0530, Faiz Abbas wrote: > The dra7xx series of SOCs contain a temperature sensor and an > associated analog-to-digital converter (ADC) which produces > an output which is proportional to the SOC temperature. > Add support for this temperature sensor. > >

Re: [U-Boot] [U-Boot,1/1] omap3: spi: the symbol for Hertz is Hz

On Sun, Nov 12, 2017 at 09:02:52PM +0100, Heinrich Schuchardt wrote: > fix typo > > Signed-off-by: Heinrich Schuchardt Applied to u-boot/master, thanks! -- Tom signature.asc Description: PGP signature ___ U-Boot mailing list

Re: [U-Boot] [U-Boot,v2,1/1] malloc: don't compare pointers to 0

On Fri, Nov 10, 2017 at 09:46:34PM +0100, Heinrich Schuchardt wrote: > 0 is not a pointer. So do not compare pointers to 0. > > Do not return 0 from functions with a pointer return > type. > > Problem identified with Coccinelle. > > Signed-off-by: Heinrich Schuchardt >

Re: [U-Boot] envtools: make sure version/timestamp header file are available

On Tue, Nov 14, 2017 at 03:47:18PM +0100, Stefan Agner wrote: > From: Stefan Agner > > With commit 84d46e7e8948 ("tools: env: allow to print U-Boot version") > the fw_env utilities need the version.h header file. Building only > the envtools in a pristine build

Re: [U-Boot] [PATCH v6 2/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support

On Tue, Nov 21, 2017 at 2:41 PM, Antony Antony wrote: > Add initial DT for NanoPi NEO Plus2 by FriendlyARM > - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU > - 1 GB DDR3 RAM > - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) > - micro SD card slot > - Gigabit

Re: [U-Boot] [PATCH v6 1/2] arm64: sun50i-h5.dtsi : update to kernel 4.14

On Tue, Nov 21, 2017 at 2:41 PM, Antony Antony wrote: > last Kernel commit of sun50i-h5.dtsi d86e63e1f0b7 > > Signed-off-by: Antony Antony Applied to u-boot-sunxi/master ___ U-Boot mailing list

Re: [U-Boot] [PATCH v3 1/6] x86: baytrail: Add fsp-header verification for secure boot FSP

Hi Anatolij, On Fri, Nov 17, 2017 at 9:13 AM, Anatolij Gustschin wrote: > From: Markus Valentin > > Introduce a new Kconfig variable for secure boot on Bay Trail based > platforms. If this variable is set, the build process tries to use > fsp-sb.bin instead of

[U-Boot] [PATCH 3/5] mmc: dump card and host capabilities if debug is enabled

This is a useful information while debugging the initialization process or performance issues. Signed-off-by: Jean-Jacques Hiblot --- drivers/mmc/mmc.c | 9 + 1 file changed, 9 insertions(+) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index a5a521e..a30b6a2

[U-Boot] [PATCH 4/5] mmc: Fixed a problem with old sd or mmc that do not support High speed

As the legacy modes were not added to the list of supported modes, old cards that do not support other modes could not be used. Signed-off-by: Jean-Jacques Hiblot --- drivers/mmc/mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/mmc.c

Re: [U-Boot] [U-Boot, v5, 3/3] ARM: dra7: Kconfig: Add thermal configs for dra7xx and am57xx

On Tue, Nov 14, 2017 at 04:12:33PM +0530, Faiz Abbas wrote: > Configure thermal configs to remain set by default for dra7xx and am57xx > devices. > > Signed-off-by: Faiz Abbas > Reviewed-by: Simon Glass Applied to u-boot/master, thanks! -- Tom

Re: [U-Boot] [RFC PATCH] usb: ehci: do not invalidate a NULL buffer

On 11/21/2017 07:30 AM, Dirk Behme wrote: > On 17.11.2017 16:04, Marek Vasut wrote: >> On 11/17/2017 03:28 PM, Dirk Behme wrote: >>> Its a valid use case to call ehci_submit_async() with a NULL buffer >>> with length 0. E.g. from usb_set_configuration(). >>> >>> As invalidate_dcache_range() isn't

Re: [U-Boot] [PATCH v2 1/1] dm: usb: ehci: avoid possible NULL dereference

On 11/20/2017 07:33 PM, Heinrich Schuchardt wrote: > Currently we check in ehci_shutdown() if ctrl is NULL after > dereferencing it. > > Before this we have already dereferenced ctrl, ctrl->hccr, > and ctrl->hcor in ehci_get_portsc_register(), ehci_submit_root(), > and hci_common_init(). > > A

Re: [U-Boot] Convert CONFIG_SYS_NAND_ECCSIZE et al to Kconfig

On Mon, Nov 20, 2017 at 7:19 PM, Tom Rini wrote: > On Sun, Nov 05, 2017 at 09:16:22AM -0600, Adam Ford wrote: > >> This converts the following to Kconfig: >>CONFIG_SYS_NAND_ECCSIZE >>CONFIG_SYS_NAND_ECCBYTES >>CONFIG_SYS_NAND_ECCSTEPS >>

Re: [U-Boot] Makefile: Correct SPL/TPL/DTB build race condition

On Sat, Nov 11, 2017 at 10:48:40PM -0500, M. Vefa Bicakci wrote: > When building on a multi-core machine for an SPL-enabled board that > also uses CONFIG_OF_EMBED, the following error can be encountered > due to a race condition: > > make[3]: *** No rule to make target 'spl/dts/dt.dtb.o',

Re: [U-Boot] [PATCH] TI: am57xx; Remove am57xx_evm_nodt_defconfig

On Tue, Nov 21, 2017 at 06:26:27PM +0530, Lokesh Vutla wrote: > On Tuesday 21 November 2017 06:17 PM, Tom Rini wrote: > > We don't want this build anymore. > > > > Cc: Lokesh Vutla > > Signed-off-by: Tom Rini > > Acked-by: Lokesh Vutla

Re: [U-Boot] [U-Boot,v2,1/1] Makefile: add coccicheck target

On Sun, Nov 19, 2017 at 02:33:14PM +0100, Heinrich Schuchardt wrote: > Coccinelle is a program for static code analysis. > For details on Coccinelle see > > http://coccinelle.lip6.fr/ > > Add scripts/coccicheck copied from Linux kernel v4.14. > > The coccicheck script executes the tests

[U-Boot] [PATCH 0/5] mmc: fixes for HS200/UHS core support

This series applies on top of "[PATCH v2 00/26] mmc: Add support for HS200 and UHS modes" It fixes a bug with old SD and MMC cards that support only the legacy mode. It also addresses the comments made on the mailing list: * dump card and host capabilities in debug mode * use 1-bit if the DTS

[U-Boot] [PATCH 1/5] dm: mmc: updated mmc_of_parse() to not fail because of an invalid bus-width

Instead of failing, the driver uses the default: 1-bit bus width. Signed-off-by: Jean-Jacques Hiblot --- drivers/mmc/mmc-uclass.c | 7 --- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index

Re: [U-Boot] [U-Boot, v5, 1/3] thermal: ti-bandgap: Add support for temperature sensor

On Tue, Nov 21, 2017 at 06:10:59PM +0530, Lokesh Vutla wrote: > > > On Tuesday 21 November 2017 06:14 PM, Tom Rini wrote: > > On Tue, Nov 14, 2017 at 04:12:31PM +0530, Faiz Abbas wrote: > >> The dra7xx series of SOCs contain a temperature sensor and an > >> associated analog-to-digital converter

[U-Boot] [PATCH] TI: am57xx; Remove am57xx_evm_nodt_defconfig

We don't want this build anymore. Cc: Lokesh Vutla Signed-off-by: Tom Rini --- board/ti/am57xx/MAINTAINERS | 1 - configs/am57xx_evm_nodt_defconfig | 66 --- 2 files changed, 67 deletions(-) delete mode 100644

Re: [U-Boot] env: Remove CONFIG_ENV_AES support

On Tue, Nov 14, 2017 at 08:39:35AM -0500, Tom Rini wrote: > This support has been deprecated since v2017.09 due to security issues. > We now remove this support. > > Signed-off-by: Tom Rini Applied to u-boot/master, thanks! -- Tom signature.asc Description: PGP

Re: [U-Boot] [PATCH 1/1] vsprintf.c: add EFI device path printing

Dear Heinrich Schuchardt, In message you wrote: > > +u16 *str = efi_dp_str((struct efi_device_path *)dp); > + > +buf = string16(buf, end, str, field_width, precision, flags); > +efi_free_pool(str); > >>> >

Re: [U-Boot] [U-Boot,v2,1/1] yaffs2: rework yaffs_new_obj_id

On Thu, Nov 09, 2017 at 01:26:43AM +0100, Heinrich Schuchardt wrote: > The iterator variable of list_for_each is never NULL. > if (1 || A) is always true. > Use break if entry found. > > Signed-off-by: Heinrich Schuchardt Applied to u-boot/master, thanks! -- Tom

Re: [U-Boot] [U-Boot, 1/1] scripts/coccinelle: add some more coccinelle tests

On Fri, Nov 10, 2017 at 07:15:02PM +0100, Heinrich Schuchardt wrote: > Add some useful static code analysis scripts for coccinelle > copied from the Linux kernel v4.14-rc8: > > Warn on check against NULL before calling free. > scripts/coccinelle/free/ifnullfree.cocci > > Detect superfluous NULL

Re: [U-Boot] [PATCH v1] mtd/spi: add support for is25lq040b

On Mon, Nov 20, 2017 at 4:23 PM, Sean Nyekjaer wrote: > Signed-off-by: Sean Nyekjaer > --- Applied to u-boot-spi/master ___ U-Boot mailing list U-Boot@lists.denx.de

[U-Boot] [PATCH 2/5] mmc: dm: support "mmc-ddr-1_2v" and "mmc-hs200-1_2v" boolean properties

Signed-off-by: Jean-Jacques Hiblot --- drivers/mmc/mmc-uclass.c | 4 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 48fafce..9723129 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -161,8

[U-Boot] [PATCH 18/22] mtd: nand: Pass the CS line to ->setup_data_interface()

From: Boris Brezillon Some NAND controllers can assign different NAND timings to different CS lines. Pass the CS line information to ->setup_data_interface() so that the NAND controller driver knows which CS line is concerned by the setup_data_interface()

[U-Boot] [PATCH 21/22] mtd: nand: introduce NAND_ROW_ADDR_3 flag

Several drivers check ->chipsize to see if the third row address cycle is needed. Instead of embedding magic sizes such as 32MB, 128MB in drivers, introduce a new flag NAND_ROW_ADDR_3 for clean-up. Since nand_scan_ident() knows well about the device, it can handle this properly. The flag is set

[U-Boot] [PATCH 15/22] mtd: nand: Drop the ->errstat() hook

From: Boris Brezillon The ->errstat() hook is no longer implemented NAND controller drivers. Get rid of it before someone starts abusing it. Signed-off-by: Boris Brezillon [Linux commit:

[U-Boot] [PATCH 03/22] mtd: nand: Add an option to maximize the ECC strength

From: Boris Brezillon The generic NAND DT bindings allows one to tweak the ECC strength and step size to their need. It can be used to lower the ECC strength to match a bootloader/firmware config, but might also be used to get a better reliability. In the

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On 11/21/2017 09:52 AM, Joakim Tjernlund wrote: > On Tue, 2017-11-21 at 17:45 +, York Sun wrote: >> >> On 11/21/2017 09:41 AM, Joakim Tjernlund wrote: >>> On Tue, 2017-11-21 at 17:32 +, York Sun wrote: CAUTION: This email originated from outside of the organization. Do not click

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On 11/21/2017 10:20 AM, Joakim Tjernlund wrote: > On Tue, 2017-11-21 at 18:04 +, York Sun wrote: >> >> >> On 11/21/2017 09:52 AM, Joakim Tjernlund wrote: >>> On Tue, 2017-11-21 at 17:45 +, York Sun wrote: On 11/21/2017 09:41 AM, Joakim Tjernlund wrote: > On Tue, 2017-11-21 at

Re: [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio

On Tue, 2017-11-21 at 18:35 +, York Sun wrote: > CAUTION: This email originated from outside of the organization. Do not click > links or open attachments unless you recognize the sender and know the > content is safe. > > > On 11/21/2017 10:20 AM, Joakim Tjernlund wrote: > > On Tue,

  1   2   >