This patch adds support for MediaTek MT7620 SoC.
All files are dedicated for u-boot.
Signed-off-by: Weijie Gao
---
v2 changes: remove use of common.h
---
arch/mips/dts/mt7620-u-boot.dtsi | 14 +
arch/mips/dts/mt7620.dtsi | 296 ++
The mt7620_rfb board supports integrated 10/100M PHYs plus two external
giga PHYs. It also has 8MB SPI-NOR, mini PCI-e x1 slot, SDHC and USB.
The mt7620_mt7530_rfb boards supports an external MT7530 giga switch and a
16MB SPI-NOR flash.
Signed-off-by: Weijie Gao
---
v2 changes: remove use of
Since mt7620 is added into Kconfig, the CONFIG_SOC_MT7628=y which is
omitted by default must be added back, otherwise make xxx_defconfig for
these boards will be configured for mt7620 platform.
Reviewed-by: Stefan Roese
Signed-off-by: Weijie Gao
---
v2 changes: none
---
This patch adds uart support for MediaTek MT7620 and earlier SoCs.
The UART used by MT7620 is incompatible with the ns16550a driver.
All registers of this UART have different addresses. A special 16-bit
register for Divisor Latch is used to set the baudrate instead of the
original two 8-bit
This patch adds support for mtmips SoCs to initialize the SDRAM.
Signed-off-by: Weijie Gao
---
v2 changes: none
---
arch/mips/mach-mtmips/ddr_init.c | 59
arch/mips/mach-mtmips/include/mach/ddr.h | 4 ++
2 files changed, 63 insertions(+)
diff --git
The sysreset driver has a config CONFIG_SPL_SYSRESET for the spl stage.
Change CONFIG_SYSRESET to CONFIG_IS_ENABLED(SYSRESET) will give spl a
chance to use _machine_restart instead of the sysreset driver.
Signed-off-by: Weijie Gao
---
v2 changes: new
---
arch/mips/cpu/cpu.c | 2 +-
1 file
This patch is a preparation for add a new soc fot mtmips.
Move all mt7628 related Kconfig (boards and UART selection) into mt7628
subdirectory and make sure the top directory of mtmips contains only
selection for SoCs.
Reviewed-by: Stefan Roese
Signed-off-by: Weijie Gao
---
v2 changes: none
CONFIG_SYS_SDRAM_BASE points to cached memory, i.e. KSEG0, which is not
suitable for detecting memory size.
Replace CONFIG_SYS_SDRAM_BASE with KSEG1, and make dram_init() always do
memory size detection in any stage.
Reviewed-by: Stefan Roese
Signed-off-by: Weijie Gao
---
v2 changes: none
---
Hi Tom,
> On Thu, Oct 29, 2020 at 01:47:41PM +0900, AKASHI Takahiro wrote:
>
> > This function is essentially independent from tftp, and will also be
> > utilised in implementing UEFI capsule update in a later commit.
> > So just give it a more generic name.
> > In addition, a new configuration
Previous the dts files for gardena-smart-gateway-mt7688 and
linkit-smart-7688 are set to be built when mtmips is selected.
This can lead to a compilation error if another soc is added to this arch
with different dtsi files.
So it's better to build the dtb only if their board is selected.
Currently only mt7628 needs the sysreset driver, do not select it for
mt7620.
Signed-off-by: Weijie Gao
---
v2 changes: new
---
arch/mips/Kconfig | 1 -
arch/mips/mach-mtmips/Kconfig | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig
This series will add support for MediaTek MT7620 SoC with two reference boards
and related drivers.
The MediaTek MT7620 is a 2x2 802.11n WiSoC integrating a MIPS 24KEc processor
running at a maximum frequency of 620MHz. This chip can be found in many
wireless routers.
This series add all basic
Hello Otavio,
Am 29.10.2020 um 23:19 schrieb Otavio Salvador:
Hi,
I am working on porting mainline U-Boot to a custom AM335X board that
only has eMMC as the boot medium.
I can load U-Boot via serial boot and flash MLO and u-boot.img into
the eMMC using DFU. Then the board boots successfully
On 10/29/20 5:47 AM, AKASHI Takahiro wrote:
Summary
===
'UpdateCapsule' is one of runtime services defined in UEFI specification
and its aim is to allow a caller (OS) to pass information to the firmware,
i.e. U-Boot. This is mostly used to update firmware binary on devices by
instructions
On Thu, 29 Oct 2020 at 15:33, Alex G. wrote:
>
> On 9/30/20 6:03 PM, Alex G. wrote:
> > Hi
> >
> > I'm trying to wrap my head around the purpose of the following lines in
> > ft_system_setup():
> >
> > if (!CONFIG_IS_ENABLED(OPTEE) ||
> > !tee_find_device(NULL, NULL, NULL, NULL))
>
Hi Lokesh, Otavio,
> + Pratyush
>
> On 30/10/20 11:36 am, Heiko Schocher wrote:
> > Hello Otavio,
> >
> > Am 29.10.2020 um 23:19 schrieb Otavio Salvador:
> >> Hi,
> >>
> >> I am working on porting mainline U-Boot to a custom AM335X board
> >> that only has eMMC as the boot medium.
> >>
> >> I
Hello Ivaylo,
Am 30.10.2020 um 08:00 schrieb Ivaylo Dimitrov:
Hi,
On 29.10.20 г. 11:32 ч., Heiko Schocher wrote:
Hello Ivaylo,
Am 29.10.2020 um 08:51 schrieb Ivaylo Dimitrov:
Hi,
On 28.10.20 г. 7:42 ч., Heiko Schocher wrote:
Hello Pali,
sorry for late response ...
Am 26.10.2020 um 22:48
On 29.10.20 22:30, Luka Kovacic wrote:
Add Luka Perkov to Puzzle-M801 BOARD MAINTAINERS.
Signed-off-by: Luka Kovacic
Cc: Luka Perkov
Reviewed-by: Stefan Roese
Thanks,
Stefan
On 10/30/20 8:54 AM, Heinrich Schuchardt wrote:
On 10/29/20 5:47 AM, AKASHI Takahiro wrote:
Summary
===
'UpdateCapsule' is one of runtime services defined in UEFI specification
and its aim is to allow a caller (OS) to pass information to the
firmware,
i.e. U-Boot. This is mostly used to
This patch adds pinctrl support for MediaTek MT7620 SoC.
The MT7620 SoC supports only pinmux.
Signed-off-by: Weijie Gao
---
v2 changes: none
---
drivers/pinctrl/mtmips/Kconfig | 9 ++
drivers/pinctrl/mtmips/Makefile | 1 +
drivers/pinctrl/mtmips/pinctrl-mt7620.c | 200
This patch adds watchdog support for the Mediatek MT7620 SoC
Signed-off-by: Weijie Gao
---
v2 changes: add expire_now
---
drivers/watchdog/Kconfig | 7 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/mt7620_wdt.c | 132 ++
3 files changed, 140
This patch adds reset controller bits definition header file for MediaTek
MT7620 SoC
Signed-off-by: Weijie Gao
---
v2 changes: none
---
include/dt-bindings/reset/mt7620-reset.h | 35
1 file changed, 35 insertions(+)
create mode 100644
This patch adds GPIO controller driver for MediaTek MT7620 SoC
Reviewed-by: Simon Glass
Signed-off-by: Weijie Gao
---
v2 changes: none
---
drivers/gpio/Kconfig | 8 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/mt7620_gpio.c | 146 +
3 files
This patch adds a clock driver for MediaTek MT7620 SoC.
This driver provides clock gate control as well as getting clock frequency
for CPU/SYS/XTAL and some peripherals.
Signed-off-by: Weijie Gao
---
v2 changes: none
---
drivers/clk/mtmips/Makefile| 1 +
This patch adds ethernet driver for MediaTek MT7620 SoC.
The MT7620 SoC has a built-in ethernet (Frame Engine) and a built-in
7-port switch and two xMII interfaces (can be MII/RMII/RGMII).
The port 0-3 of the switch connects to intergrited FE PHYs. Port 4 can be
configured to connect to either
This patch adds USB PHY driver for MediaTek MT7620 SoC
Signed-off-by: Weijie Gao
---
v2 changes: none
---
drivers/phy/Kconfig | 7 +++
drivers/phy/Makefile | 1 +
drivers/phy/mt7620-usb-phy.c | 113 +++
3 files changed, 121 insertions(+)
The driver is missing pad control settings (pad delay and pad conf) for
the mt7620 and mt76x8. Although mt76x8 still works well, mt7620 will
encounter CRC error on data transfers.
This patch adds default pad control settings for mt7620_compat.
Also a missing field .sclk_cycle_shift = 20 for
This patch adds spi controller support for MediaTek MT7620 SoC.
The SPI controller supports two chip selects. These two chip selects are
implemented as two separate register groups, but they share the same bus
(DI/DO/CLK), only CS pins are dedicated for each register group.
Appearently these two
Update maintainer for MediaTek MIPS platform
Acked-by: Stefan Roese
Reviewed-by: Stefan Roese
Signed-off-by: Weijie Gao
---
v2 changes: none
---
MAINTAINERS | 23 +++
1 file changed, 23 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 857e236aa4..bcdc23c2e8
Add DM_FLAG_PRE_RELOC flag for reset-mtmips to make sure this driver can
be probed before relocation even if u-boot,dm-pre-reloc is not present
in the dts.
Signed-off-by: Weijie Gao
---
v2 changes: new
---
drivers/reset/reset-mtmips.c | 1 +
1 file changed, 1 insertion(+)
diff --git
+ Pratyush
On 30/10/20 11:36 am, Heiko Schocher wrote:
> Hello Otavio,
>
> Am 29.10.2020 um 23:19 schrieb Otavio Salvador:
>> Hi,
>>
>> I am working on porting mainline U-Boot to a custom AM335X board that
>> only has eMMC as the boot medium.
>>
>> I can load U-Boot via serial boot and flash MLO
I've created a squashfs file system with Yocto (it use squashfs-tools)
and u-boot command sqfsls give the error:'Error while searching inode:
unknown type.'
After some digging in the code I found that the index is off by 1.
This patch fix this issue and I can successful use the sqfsls command.
From: Igor Opaniuk
Enable CONFIG_CMD_IMPORTENV and CONFIG_OF_LIBFDT_OVERLAY needed
for booting regular Toradex BSP images.
Signed-off-by: Igor Opaniuk
---
configs/verdin-imx8mm_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/verdin-imx8mm_defconfig
Hi Arnaud,
Thanks for your patch.
Please use module name as subject prefix instead of a file name,
eg. "rockchip: video: vop".
On 2020/10/27 下午9:21, Arnaud Patard (Rtp) wrote:
The current code is using an hard coded enum and the of node reg value of
endpoint to find out if the
On Fri, Oct 30, 2020 at 4:53 PM Igor Opaniuk wrote:
>
> From: Igor Opaniuk
>
> Enable CONFIG_CMD_IMPORTENV and CONFIG_OF_LIBFDT_OVERLAY needed
> for booting regular Toradex BSP images.
>
> Signed-off-by: Igor Opaniuk
Reviewed-by: Oleksandr Suvorov
> ---
>
> configs/verdin-imx8mm_defconfig |
On Fri, Oct 30, 2020 at 5:15 PM Oleksandr Suvorov
wrote:
>
> On Fri, Oct 30, 2020 at 4:53 PM Igor Opaniuk wrote:
> >
> > From: Igor Opaniuk
> >
> > Enable CONFIG_CMD_IMPORTENV and CONFIG_OF_LIBFDT_OVERLAY needed
> > for booting regular Toradex BSP images.
> >
> > Signed-off-by: Igor Opaniuk
>
On Fri, Oct 30, 2020 at 4:55 PM Igor Opaniuk wrote:
>
> From: Igor Opaniuk
>
> Enable CONFIG_CMD_IMPORTENV and CONFIG_OF_LIBFDT_OVERLAY needed
> for booting regular Toradex BSP images.
>
> Signed-off-by: Igor Opaniuk
Reviewed-by: Oleksandr Suvorov
> ---
>
> configs/verdin-imx8mm_defconfig |
On 2020/10/7 上午4:39, Alper Nebi Yasak wrote:
Found this by comparing it to the coreboot driver, a form of this call
was introduced there in their commit b9a7877568cf ("rockchip/*: refactor
edp driver"). This is copy-pasted from U-Boot's link_train_cr() slightly
above it.
Without this on a
> -Original Message-
> From: Tom Rini
> Sent: Thursday, October 29, 2020 8:14 PM
> To: Meenakshi Aggarwal
> Cc: u-boot@lists.denx.de; Priyanka Jain ; Varun Sethi
>
> Subject: Re: [PATCH v4 2/3] armv8: lx2162a: Add Soc changes to support
> LX2162A
>
> On Thu, Oct 29, 2020 at
> On 01.10.2020, at 20:40, Heiko Stuebner wrote:
>
> From: Heiko Stuebner
>
> The SRAM on the PX30 is not big enough to hold multiple DDR configs
> so it needs to be selected during build.
>
> So far simply the DDR3 config was always selected and getting DDR4
> or LPDDR2/3 initialized
By default CONFIG_LOGLEVEL seems to be set to 4 which is
too low and doesn't show dev_info/dev_notice/dev_warn
messages on console. This has been deliberately set low
globally to be conservative setting across the board due to
primary bootloader size limitations. It is best to tune
per board
Hi,
On 10/30/20 9:07 AM, Biju Das wrote:
Add SoC identification string for attribute matching.
Also changed the comments from "an SOC" to "a SoC".
This is not a correct change, "an" should be used if the word that
follows starts with a vowel sound, which "SoC" does.
"SOC" could be changed
Hi Dave,
Thanks for the feedback.
> Subject: Re: [PATCH] dm: soc: Add SoC id for attribute matching
>
> Hi,
>
> On 10/30/20 9:07 AM, Biju Das wrote:
> > Add SoC identification string for attribute matching.
> > Also changed the comments from "an SOC" to "a SoC".
>
> This is not a correct
From: Igor Opaniuk
Enable CONFIG_CMD_IMPORTENV and CONFIG_OF_LIBFDT_OVERLAY needed
for booting regular Toradex BSP images.
Signed-off-by: Igor Opaniuk
---
configs/verdin-imx8mm_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/verdin-imx8mm_defconfig
Hi,
I didn't include changes in the defconfig because you need to manually
add the device to the QEMU virt machine via the command line. On the
other hand the u-boot binary size does not really matter for QEMU
environments. For CI it will also be nice to ensure this set-up will
build.
I'll send
On 2020/10/24 上午3:57, Jagan Teki wrote:
Like, rk3399 the rk3288 also supports 4K resolution.
So, enable it for rk3288 with HDMI platforms.
Right now, rockchip video drivers are supporting for rk3288,
rk3399 SoC families, so mark the 4K resolution by default
if it's an HDMI video out.
On 2020/10/24 上午3:57, Jagan Teki wrote:
Enable Console multiplexing in ROCKPi N8 which would is
required to video out the console buffer.
Enable it.
Signed-off-by: Jagan Teki
Reviewed-by: Kever Yang
Thanks,
- Kever
---
configs/rock-pi-n8-rk3288_defconfig | 1 -
1 file changed, 1
On 2020/10/24 上午3:57, Jagan Teki wrote:
Add chosen node in -u-boot.dtsi for ROCK-Pi N8 board.
This will help to get serial out messages.
Signed-off-by: Jagan Teki
Reviewed-by: Kever Yang
Thanks,
- Kever
---
arch/arm/dts/rk3288-rock-pi-n8-u-boot.dtsi | 6 ++
1 file changed, 6
On 2020/10/24 上午3:57, Jagan Teki wrote:
Enable Console multiplexing in ROCKPi N10 which would is
required to video out the console buffer.
Enable it.
Signed-off-by: Jagan Teki
Reviewed-by: Kever Yang
Thanks,
- Kever
---
configs/rock-pi-n10-rk3399pro_defconfig | 1 -
1 file changed, 1
On 30.10.20 12:45, Holger Brunck wrote:
Address most of the checkpatch issues we found in km_arm and common km
code.
CC: Stefan Roese
CC: Valentin Longchamp
Signed-off-by: Holger Brunck
Reviewed-by: Stefan Roese
Thanks,
Stefan
---
board/keymile/common/common.c | 44
On 2020/10/28 下午9:33, Jagan Teki wrote:
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose
carrier board with capacitive touch interface.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel
On 2020/10/28 下午9:33, Jagan Teki wrote:
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0
On 2020/10/28 下午9:33, Jagan Teki wrote:
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2
On 2020/10/28 下午9:33, Jagan Teki wrote:
The existing common code for Engicam boards uses i.MX6,
so attach that into i.MX6 Engicam boards so-that adding
new SoC variants of Engicam boards become meaningful.
Add support for it.
Cc: Stefano Babic
Signed-off-by: Jagan Teki
Reviewed-by: Kever
Add of_match_node() helper function to iterate over the device tree
and tell if a device_node has a matching of_match structure.
Signed-off-by: Biju Das
Reviewed-by: Lad Prabhakar
---
drivers/core/device.c | 21 +
include/dm/device.h | 13 +
2 files changed,
Add SoC identification string for attribute matching.
Also changed the comments from "an SOC" to "a SoC".
Signed-off-by: Biju Das
Reviewed-by: Lad Prabhakar
---
drivers/soc/soc-uclass.c | 19 ++-
drivers/soc/soc_sandbox.c | 8
include/soc.h | 39
On 2020/10/25 上午12:43, Samuel Holland wrote:
The Rockchip boot ROM expects little-endian values in the image header.
When running mkimage on a big-endian machine, these values need to be
byteswapped before writing or verifying the header.
This change fixes cross-compiling U-Boot SPL for the
On Thu, Oct 22, 2020 at 11:22 AM Igor Opaniuk wrote:
>
> From: Igor Opaniuk
>
> Add implementation of board_mem_get_layout for overriding the memory
> layout.
>
> Signed-off-by: Igor Opaniuk
Acked-by: Oleksandr Suvorov
> ---
>
> board/toradex/apalis-imx8/apalis-imx8.c | 23
On 2020/10/28 下午9:33, Jagan Teki wrote:
This would be useful and recommended boot flow for new boards
which has doesn't have the DDR support yet in mainline.
Sometimes it is very useful for debugging mainline DDR support.
Documen it for px30 boot flow.
Signed-off-by: Jagan Teki
On Fri, Oct 30, 2020 at 6:56 PM Harm Berntsen wrote:
>
> Hi,
>
> This patch series allows you to use a mmc drive from within QEMU:
>
> 1. make qemu_arm_defconfig
> 2. Enable the CONFIG_DM_MMC, CONFIG_MMC_PCI, CONFIG_MMC_SDHCI options
> 3. Run quemu as follows:
>
>qemu-system-arm
>-machine
On 30/10/2020 16:03, Mattijs Korpershoek wrote:
> From: Guillaume La Roque
>
> When booting from rom usb, skip the boot logo logic as it's possible
> that the partition containing the logo does not exist yet.
>
> Signed-off-by: Neil Armstrong
> Signed-off-by: Guillaume La Roque
>
Hi Peter,
Could you add you signature for this patch?
Thanks,
- Kever
On 2020/9/29 下午9:06, Peter Robinson wrote:
Fix up USB config options so keyboards and other USB devices work.
---
configs/rock960-rk3399_defconfig | 9 ++---
include/configs/rock960_rk3399.h | 2 ++
2 files
Hi,
On 2020/10/16 上午2:29, Tom Rini wrote:
On Wed, Oct 14, 2020 at 11:39:40PM +0300, Alper Nebi Yasak wrote:
On 14/10/2020 22:31, Tom Rini wrote:
On Wed, Oct 14, 2020 at 09:58:28PM +0300, Alper Nebi Yasak wrote:
On 14/10/2020 18:24, Tom Rini wrote:
Ugh. In so far as anything can be
Hi Jonas,
Could you help to format the coding style as required so that we
can merge this patch to the mainline?
Thanks,
- Kever
On 2020/10/14 上午4:21, Jonas Karlman wrote:
From: Francis Fan
Extend rockchip efuse driver with support for RK3288 non-secure efuse.
Signed-off-by: Francis
Hi,
On 29.10.20 г. 11:32 ч., Heiko Schocher wrote:
Hello Ivaylo,
Am 29.10.2020 um 08:51 schrieb Ivaylo Dimitrov:
Hi,
On 28.10.20 г. 7:42 ч., Heiko Schocher wrote:
Hello Pali,
sorry for late response ...
Am 26.10.2020 um 22:48 schrieb Pali Rohár:
On Monday 27 April 2020 09:03:13 Heiko
Hi,
This patch series allows you to use a mmc drive from within QEMU:
1. make qemu_arm_defconfig
2. Enable the CONFIG_DM_MMC, CONFIG_MMC_PCI, CONFIG_MMC_SDHCI options
3. Run quemu as follows:
qemu-system-arm
-machine virt,highmem=off \
-device sdhci-pci \
-device
The only platforms with an asm/acpi_table.h file are X86 and Sandbox.
Some drivers, i.e. pci_mmc.c, can generate ACPI info and therefore
include asm/acpi_table.h by proxy. This commit ensures that the
platforms wishing to use such driver and do not have ACPI support do not
fail on this include.
As no gpio.h is defined for this architecture, to avoid
compilation failure, do not include for
QEMU.
Signed-off-by: Harm Berntsen
---
arch/arm/include/asm/gpio.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
The driver only needs to retrieve the pin for the ACPI info. The driver
itself works without depending on GPIO.
Signed-off-by: Harm Berntsen
CC: Simon Glass
---
drivers/mmc/pci_mmc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/pci_mmc.c b/drivers/mmc/pci_mmc.c
index
On 2020/10/2 上午2:40, Heiko Stuebner wrote:
From: Heiko Stuebner
The SRAM on the PX30 is not big enough to hold multiple DDR configs
so it needs to be selected during build.
So far simply the DDR3 config was always selected and getting DDR4
or LPDDR2/3 initialized would require a code
Address most of the checkpatch issues we found in km_arm and common km
code.
CC: Stefan Roese
CC: Valentin Longchamp
Signed-off-by: Holger Brunck
---
board/keymile/common/common.c | 44 ---
board/keymile/common/ivm.c | 84 ++---
The name of structure element logl_prev is not matched by the
documentation.
%s/logl_pref/logl_prev/
Signed-off-by: Heinrich Schuchardt
---
include/asm-generic/global_data.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/asm-generic/global_data.h
Hi Patrick,
On Wed, 28 Oct 2020 at 05:52, Patrick DELAUNAY wrote:
>
> Hi Simon,
>
> > From: Simon Glass
> > Sent: lundi 26 octobre 2020 20:23
> >
> > Hi Patrick,
> >
> > On Thu, 15 Oct 2020 at 09:59, Patrick DELAUNAY
> > wrote:
> > >
> > > Hi Simon,
> > >
> > > > From: Simon Glass
> > > >
Hi Paul,
On Tue, 27 Oct 2020 at 20:25, Pali Rohár wrote:
>
> On Tuesday 27 October 2020 20:10:37 Simon Glass wrote:
> > Hi Paul,
> >
> > On Mon, 26 Oct 2020 at 07:11, Pali Rohár wrote:
> > >
> > > On more places is used pattern 'command > $@ || rm -f $@'. But it does not
> > > propagate failure
Hi Alper,
On Mon, 26 Oct 2020 at 17:20, Alper Nebi Yasak wrote:
>
> On 26/10/2020 22:22, Simon Glass wrote:
> > Hi Alper,
> >
> > On Mon, 19 Oct 2020 at 15:29, Alper Nebi Yasak
> > wrote:
> >>
> >> On 19/10/2020 05:41, Simon Glass wrote:
> >>> When a section is compressed, all entries within
Hi Weijie,
On Thu, 29 Oct 2020 at 21:21, Weijie Gao wrote:
>
> On Thu, 2020-10-29 at 08:30 -0600, Simon Glass wrote:
> > Hi Weijie,
> >
> > On Thu, 29 Oct 2020 at 03:47, Weijie Gao wrote:
> > >
> > > On Mon, 2020-10-26 at 22:51 -0600, Simon Glass wrote:
> > > > Hi Weijie,
> > > >
> > > > On
On Tue, Oct 27, 2020 at 07:55:39PM -0400, Sean Anderson wrote:
> This exercises a few success and failure modes of the log filter-*
> commands. log filter-list is not tested because it's purely informational.
> I don't think there's a good way to test it except by testing if the output
> of the
On Tue, Oct 27, 2020 at 07:55:36PM -0400, Sean Anderson wrote:
> Some commands can get very unweildy if they have too many positional
> arguments. Adding options makes them easier to read, remember, and
> understand.
>
> This implementation of getopt has been taken from barebox, which has had
>
On Tue, Oct 27, 2020 at 07:55:33PM -0400, Sean Anderson wrote:
> Move parsing of log level into its own function so it can be re-used. This
> also adds support for using log level names instead of just the integer
> equivalent.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
On Tue, Oct 27, 2020 at 07:55:35PM -0400, Sean Anderson wrote:
> This makes the log level command print all valid log levels. The default
> log level is annotated. This provides an easy way to see which log levels
> are compiled-in.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
On Tue, Oct 27, 2020 at 07:55:37PM -0400, Sean Anderson wrote:
> A few of these tests were inspired by those in glibc. The syntax for
> invoking test_getopt is a bit funky, but it's necessary so that the CPP can
> parse the arguments correctly.
>
> Signed-off-by: Sean Anderson
Applied to
On Tue, Oct 27, 2020 at 07:55:40PM -0400, Sean Anderson wrote:
> The functions in log.h are already mostly documented, so add them to the
> generated documentation.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Tue, Oct 27, 2020 at 07:55:41PM -0400, Sean Anderson wrote:
> This updates logging documentation with some examples of the new commands
> added in the previous commits. It also removes some items from the to-do
> list which have been implemented.
>
> Signed-off-by: Sean Anderson
>
On Tue, Oct 27, 2020 at 07:55:38PM -0400, Sean Anderson wrote:
> This adds several commands to add, list, and remove log filters. Due to the
> complexity of adding a filter, `log filter-list` uses options instead of
> positional arguments.
>
> These commands have been added as subcommands to log
On Thursday 29 October 2020 14:06:30 Lokesh Vutla wrote:
> On 24/10/20 5:49 pm, Tom Rini wrote:
> > On Sat, Oct 24, 2020 at 12:46:45PM +0200, Merlijn Wajer wrote:
> >> Hi,
> >>
> >> On 24/10/2020 12:06, Pali Rohár wrote:
> >>> On Wednesday 21 October 2020 08:47:02 Tom Rini wrote:
> On Wed,
On Fri, Oct 30, 2020 at 12:11 AM Heinrich Schuchardt wrote:
>
> %s/enougth/enough/
>
> Signed-off-by: Heinrich Schuchardt
Acked-by: Joe Hershberger
From: Guillaume La Roque
When booting from rom usb, skip the boot logo logic as it's possible
that the partition containing the logo does not exist yet.
Signed-off-by: Neil Armstrong
Signed-off-by: Guillaume La Roque
Signed-off-by: Mattijs Korpershoek
---
include/configs/meson64_android.h |
On Tue, Oct 27, 2020 at 07:55:34PM -0400, Sean Anderson wrote:
> This allows users to query which categories and drivers are available on
> their system. This allows them to construct filter-add commands without
> (e.g.) adjusting the log format to show categories and drivers.
>
> Signed-off-by:
On Tue, Oct 27, 2020 at 07:55:31PM -0400, Sean Anderson wrote:
> This tests log filters matching on a minimum level.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Oct 27, 2020 at 07:55:29PM -0400, Sean Anderson wrote:
> This adds some tests for log filters which deny if they match.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Oct 27, 2020 at 07:55:32PM -0400, Sean Anderson wrote:
> This reduces duplicate code, and makes adding new sub-commands easier.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Oct 27, 2020 at 07:55:26PM -0400, Sean Anderson wrote:
> Without this flag, log filters can only explicitly accept messages.
> Allowing denial makes it easier to filter certain subsystems. Unlike
> allow-ing filters, deny-ing filters are added to the beginning of the
> filter list. This
On Tue, Oct 27, 2020 at 07:55:28PM -0400, Sean Anderson wrote:
> Now that the log test command is no more, we can give the log tests proper
> names.
>
> Signed-off-by: Sean Anderson
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Tue, Oct 27, 2020 at 07:55:30PM -0400, Sean Anderson wrote:
> This is the complement of the existing behavior to match only messages with
> a log level less than a threshold. This is primarily useful in conjunction
> with LOGFF_DENY.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon
On Tue, Oct 27, 2020 at 07:55:27PM -0400, Sean Anderson wrote:
> When rebasing this series I had to renumber all my log tests because
> someone made another log test in the meantime. This involved updaing a
> number in several places (C and python), and it wasn't checked by the
> compiler. So I
Kever Yang writes:
> Hi Arnaud,
>
> Thanks for your patch.
>
> Please use module name as subject prefix instead of a file name,
> eg. "rockchip: video: vop".
>
ok. will fix.
> On 2020/10/27 下午9:21, Arnaud Patard (Rtp) wrote:
>> The current code is using an hard coded enum and the of
On Sat, Oct 10, 2020 at 10:28:05AM +0200, Heiko Schocher wrote:
> Enable the new Kconfig option ENV_SPI_EARLY if you want
> to use Environment in SPI flash before relocation.
> Call env_init() and than you can use env_get_f() for
> accessing Environment variables.
>
> Signed-off-by: Heiko
On Sat, Oct 10, 2020 at 10:28:06AM +0200, Heiko Schocher wrote:
> On aristianetos boards the display type is detected
> through "panel" environment variable. Dependend on the
> display type we detect the board type and this decides which
> DTB we have to use for the board.
>
> So we need early
On Thu, Oct 29, 2020 at 03:31:27PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull an update of Marvell Armada & Octeon TX/TX2 related
> patches. Here the summary log:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sat, Oct 10, 2020 at 10:28:04AM +0200, Heiko Schocher wrote:
> split from env_import_redund() the part which checks
> which Environment is valid into a separate function
> called env_check_redund() and call it from env_import_redund().
>
> So env_check_redund() can be used from places which
1 - 100 of 127 matches
Mail list logo
