[U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR

2014-10-06 Thread Ashish Kumar
* fdt_fixup_mtdparts is called from ft_board_setup * run mtdparts default to create NAND, NOR partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- board/freescale

[U-Boot] [PATCH] powerpc/BSC9131RDB: Enable creation of dynamic partitions for NAND

2014-10-07 Thread Ashish Kumar
* fdt_fixup_mtdparts is called from ft_board_setup * Run mtdparts default to create NAND partition on uboot * Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- board/freescale

Re: [U-Boot] [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR

2014-10-14 Thread Ashish Kumar
Cc: Wood Scott-B07421 Subject: Re: [PATCH] powerpc/BSC9132QDS: Enable creation of dynamic partition for NAND and NOR On 10/06/2014 05:54 AM, Ashish Kumar wrote: * fdt_fixup_mtdparts is called from ft_board_setup * run mtdparts default to create NAND, NOR partition on uboot * Use mtdparts

[U-Boot] [PATCH] powerpc/BSC9131RDB: add mtdparts suppport

2014-09-10 Thread Ashish Kumar
Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- include/configs/BSC9131RDB.h | 15 +++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/include/configs

[U-Boot] [PATCH] powerpc/BSC9132qds: add mtdparts suppport

2014-09-10 Thread Ashish Kumar
Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- include/configs/BSC9132QDS.h | 16 1 files changed, 16 insertions(+), 0 deletions(-) diff --git a/include

[U-Boot] [PATCH] powerpc/BSC9131RDB: Add mtdparts suppport

2014-09-22 Thread Ashish Kumar
* Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- include/configs/BSC9131RDB.h | 15 +++ 1 files changed, 15 insertions(+), 0 deletions(-) V2: - Reduce uboot and dtb

[U-Boot] [PATCH] powerpc/BSC9131RDB: Add mtdparts suppport

2014-09-22 Thread Ashish Kumar
* Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- include/configs/BSC9131RDB.h | 15 +++ 1 files changed, 15 insertions(+), 0 deletions(-) V2: - Reduce uboot and dtb

[U-Boot] [PATCH] powerpc/BSC9132qds: Add mtdparts suppport

2014-09-22 Thread Ashish Kumar
* Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- include/configs/BSC9132QDS.h | 16 1 files changed, 16 insertions(+), 0 deletions(-) V2: - Reduce uboot and dtb

[U-Boot] [PATCH] powerpc/BSC9132qds: Add mtdparts suppport

2014-09-22 Thread Ashish Kumar
* Use mtdparts to create partitions dynamically rather than using static partitions in device tree Signed-off-by: Ashish Kumar ashish.ku...@freescale.com --- include/configs/BSC9132QDS.h | 16 1 files changed, 16 insertions(+), 0 deletions(-) diff --git a/include/configs

Re: [U-Boot] [PATCH] powerpc/BSC9131RDB: Add mtdparts suppport

2014-09-22 Thread Ashish Kumar
Sorry Please ignore this patch, since version info is incorrect Regards Ashish -Original Message- From: Ashish Kumar [mailto:ashish.ku...@freescale.com] Sent: Monday, September 22, 2014 8:06 PM To: u-boot@lists.denx.de Cc: Wood Scott-B07421; Sun York-R58495; Kumar Ashish-B37399 Subject

Re: [U-Boot] [PATCH] powerpc/BSC9132qds: Add mtdparts suppport

2014-09-22 Thread Ashish Kumar
Sorry, please ignore this patch. Since version info is missing. Regards Ashish -Original Message- From: Ashish Kumar [mailto:ashish.ku...@freescale.com] Sent: Monday, September 22, 2014 8:06 PM To: u-boot@lists.denx.de Cc: Wood Scott-B07421; Sun York-R58495; Kumar Ashish-B37399 Subject

[U-Boot] [PATCH] ls2-2085ardb: Correct the model name of ls2085ardb

2016-01-14 Thread Ashish Kumar
From: Ashish Kumar <ashish.ku...@freescale.com> Signed-off-by: Ashish Kumar <ashish.ku...@freescale.com> --- arch/arm/dts/fsl-ls2080a-rdb.dts |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/dts/fsl-ls2080a-rdb.dts b/arch/arm/dts/fsl-ls2080a-r

[U-Boot] [PATCH] ls2-2085a: Increase default hugepage count

2016-01-14 Thread Ashish Kumar
* Increase default hugepage count to 256 from 16 * Note: default env variables are stored at 0x58020/0x58420 of size 0x2000 Signed-off-by: Ashish Kumar <ashish.ku...@freescale.com> --- include/configs/ls2080a_common.h |2 +- include/configs/ls2080ardb.h |2 +- 2

[U-Boot] [PATCH] ls2-2085ardb: Correct the model name of ls2085ardb

2016-01-14 Thread Ashish Kumar
Signed-off-by: Ashish Kumar <ashish.ku...@freescale.com> --- arch/arm/dts/fsl-ls2080a-rdb.dts |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/dts/fsl-ls2080a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts index 1a1813b..71d1969 100644 --- a/arch/arm/dts/fsl-l

[U-Boot] [PATCH] ls2-2085a: Increase default hugepage count

2016-01-14 Thread Ashish Kumar
From: Ashish Kumar <ashish.ku...@freescale.com> * Increase default hugepage count to 256 from 16 * Note: default env variables are stored at 0x58020/0x58420 of size 0x2000 Signed-off-by: Ashish Kumar <ashish.ku...@freescale.com> --- include/configs/ls2080a_com

[U-Boot] [PATCH] ARMv8:ls2-2080a: Implement core ERRATA 829520, 833471

2016-01-18 Thread Ashish Kumar
-off-by: Ashish Kumar <ashish.ku...@freescale.com> --- arch/arm/cpu/armv8/start.S | 20 include/configs/ls2080a_common.h |2 ++ 2 files changed, 22 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index d

[U-Boot] [PATCH] ARMv8:ls2080: Move the core errata defines out of board specific file

2016-01-29 Thread Ashish Kumar
* Valid for core A57 Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/include/asm/arch-fsl-layerscape/config.h |4 include/configs/ls2080a_common.h |3 --- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/asm/ar

Re: [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count

2016-02-01 Thread Ashish Kumar
Agree, Please drop this while merging. Regards Ashish -Original Message- From: york sun Sent: Tuesday, February 02, 2016 11:50 AM To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de Subject: Re: [PATCH] ls2-2085a: Increase default hugepage count On 02/01/2016 10:09 PM,

Re: [U-Boot] [PATCH] ls2-2085a: Increase default hugepage count

2016-02-01 Thread Ashish Kumar
Hello York, It is like a heads-up, that user needs to erase the environment variable location before flashing a new uboot for the changes to reflect. Regards Ashish -Original Message- From: york sun [mailto:york@nxp.com] Sent: Monday, February 01, 2016 10:17 PM To: Ashish Kumar

Re: [U-Boot] [PATCH] ARMv8:ls2-2080a: Implement core ERRATA 829520, 833471

2016-01-21 Thread Ashish Kumar
Please see inline Regards Ashish -Original Message- From: york sun [mailto:york@nxp.com] Sent: Tuesday, January 19, 2016 10:34 PM To: Ashish Kumar <ashish.ku...@freescale.com>; u-boot@lists.denx.de Subject: Re: [PATCH] ARMv8:ls2-2080a: Implement core ERRATA 829520, 833471 On

[U-Boot] [PATCH][v2] arch/powperpc: Fix start_align due to use of __ffs64() instead ffs64()

2016-01-22 Thread Ashish Kumar
Return value of ffs64() different to that of __ffs64(), ffs64(0x8000) = 0x20 __ffs64(0x8000) = 0x1f, as result of this change -1 from start_align needs to be removed. Incorrect DDR law was created in case of B4860qds Signed-off-by: Ashish Kumar <ashish.ku...@nxp.

[U-Boot] [PATCH] arch/powperpc: Fix start_align due to use of __ffs64() instead ffs64()

2016-01-22 Thread Ashish Kumar
Return value of ffs64() different to that of __ffs64(), ffs64(0x8000) = 0x20 __ffs64(0x8000) = 0x1f, as result of this change -1 from start_align needs to be removed. Incorrect DDR law was created in case of B4860qds Signed-off-by: Ashish Kumar <ashish.ku...@nxp.

[U-Boot] [PATCH] Powperpc:u-boot: Fix bug created due to use of __ffs64() in place of custom ffs64()

2016-01-22 Thread Ashish Kumar
* Return value of ffs64() different to that of __ffs64(), ffs64(0x8000) = 0x20 __ffs64(0x8000) = 0x1f, as result of this change -1 from start_align needs to be removed. * Incorrect DDR law was created in case of B4860qds * Tested on B4860qds and T1040 Signed-off-by: Ashish

[U-Boot] [PATCH] ls2085a: Correct the model & board name of RDB and QDS

2016-01-20 Thread Ashish Kumar
* LS2085ARDB and LS2085AQDS host LS2080A and LS2085A, So update model and board name. Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/dts/fsl-ls2080a-qds.dts|2 +- arch/arm/dts/fsl-ls2080a-rdb.dts|2 +- board/freescale/ls2080aqds/ls2080aqds.c

[U-Boot] [PATCH][v2] ARMv8:ls2-2080a: Implement core ERRATA 829520, 833471

2016-01-27 Thread Ashish Kumar
-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Incorporated review comments arch/arm/cpu/armv8/start.S| 19 +++ arch/arm/include/asm/arch-fsl-layerscape/config.h |4 2 files changed, 23 insertions(+), 0 deletions(-) diff --git a/ar

[U-Boot] [PATCH] armv8: fsl-lsch3: Conditionally Remove errata a0009203 from lsch3 init

2017-02-02 Thread Ashish Kumar
This i2c errata is only valid for ls2080 and ls2088 SoC Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4 2 files changed, 8 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-laye

[U-Boot] [PATCH] armv8: fsl-lsch3: Put TZASC configuration in hash define

2017-02-02 Thread Ashish Kumar
Number of TZASC instances may vary across NXP SoCs. So put TZASC configuration under instance specific defines. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig| 8 ++

[U-Boot] [PATCH] armv8:fsl-layerscape: Add registers space defination for CCI-400 bus

2017-02-01 Thread Ashish Kumar
immap_lsch2 to fsl_immap, so that it can be used for both chasis 2 and chasis 3. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- README | 9 arch/arm/cpu/armv8/fsl-layers

[U-Boot] [PATCH] arm: fsl-layerscape: Move QSGMII wriop_init to SoC file

2017-01-30 Thread Ashish Kumar
From: Prabhakar Kushwaha MAC number used per QSGMII is not fixed. It may wary from SoC to SoC. So move QSGMII wriop_init_dpmac() to SoC file. Signed-off-by: Prabhakar Kushwaha --- .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c|

[U-Boot] [PATCH] armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding

2017-01-30 Thread Ashish Kumar
From: Prabhakar Kushwaha SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha ---

Re: [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()

2017-02-21 Thread Ashish Kumar
Hello Joe, Please see inline. Regards Ashish -Original Message- From: Joe Hershberger [mailto:joe.hershber...@gmail.com] Sent: Thursday, February 16, 2017 5:22 AM To: Ashish Kumar <ashish.ku...@nxp.com> Cc: u-boot <u-boot@lists.denx.de> Subject: Re: [U-Boot] [PATCH v2]

[U-Boot] [PATCH v2] armv8: fsl-lsch3: Instantiate TZASC configuration in 2 groups

2017-02-23 Thread Ashish Kumar
Number of TZASC instances may vary across NXP SoCs. So put TZASC configuration under instance specific defines. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Change description to make it more appropriat

[U-Boot] [PATCH v2] armv8:fsl-layerscape: Add registers space defination for CCI-400 bus

2017-02-23 Thread Ashish Kumar
immap_lsch2 to fsl_immap, so that it can be used for both chasis 2 and chasis 3. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Add new Kconfig in alphabetic order README |

[U-Boot] [PATCH v2] armv8: fsl-lsch3: Conditionally Remove errata a0009203 from lsch3 init

2017-02-23 Thread Ashish Kumar
This i2c errata is only valid for LS2080A and its variants, namely LS2080A, LS2085A and LS2088A Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Change Descristion to make it more specific about impacted SoC arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 arch/arm/cpu/arm

[U-Boot] [PATCH 3/3] armv8: ls1088aqds: Add support of LS1088AQDS

2017-02-15 Thread Ashish Kumar
ed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Shaohui Xie <shaohui@nxp.com> --- arch/arm/Kconfig | 11 + arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 21 + arch

[U-Boot] [PATCH 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

2017-02-15 Thread Ashish Kumar
m> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 + .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c| 10 ++ arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 124 + arch/arm/include/asm/arch-fsl-l

[U-Boot] [PATCH v2] armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding

2017-02-15 Thread Ashish Kumar
From: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kuma

[U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()

2017-02-15 Thread Ashish Kumar
From: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Even after memory free of phydev, priv is still pointing to the obsolete address. So update priv->phydev as NULL after memory free. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish K

[U-Boot] [PATCH 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform

2017-02-15 Thread Ashish Kumar
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.w...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-of

[U-Boot] [PATCH] driver: net: ldpaa: Update priv->phydev after free()

2017-02-15 Thread Ashish Kumar
From: Prabhakar Kushwaha Even after memory free of phydev, priv is still pointing to the obsolete address. So update priv->phydev as NULL after memory free. Signed-off-by: Prabhakar Kushwaha --- drivers/net/ldpaa_eth/ldpaa_eth.c | 4 +++-

[U-Boot] [PATCH v2] arm: fsl-layerscape: Move QSGMII wriop_init to SoC file

2017-02-15 Thread Ashish Kumar
From: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> MAC number used per QSGMII is not fixed. It may wary from SoC to SoC. So move QSGMII wriop_init_dpmac() to SoC file. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@

Re: [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load

2016-11-09 Thread Ashish Kumar
Hello York, Please see inline. Regards -Original Message- From: york sun Sent: Tuesday, November 08, 2016 11:38 PM To: Ashish Kumar <ashish.ku...@nxp.com>; Priyanka Jain <priyanka.j...@nxp.com>; u-boot@lists.denx.de Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.c

Re: [U-Boot] [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load

2016-11-08 Thread Ashish Kumar
Hello York, Please see inline. Regards Ashish -Original Message- From: york sun Sent: Tuesday, November 08, 2016 12:23 AM To: Priyanka Jain <priyanka.j...@nxp.com>; u-boot@lists.denx.de Cc: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com>; Ashish Kumar <ashish.ku...@n

[U-Boot] [Patch v2 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform

2017-04-10 Thread Ashish Kumar
ig @@ -0,0 +1,15 @@ +if TARGET_LS1088ARDB + +config SYS_BOARD + default "ls1088a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1088ardb" + +endif diff --

[U-Boot] [Patch v2 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

2017-04-10 Thread Ashish Kumar
(DPAA2) - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs - QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc Signed-off-by: Alison Wang <alison.w...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.

[U-Boot] [Patch v2 3/3] armv8: ls1088aqds: Add support of LS1088AQDS

2017-04-10 Thread Ashish Kumar
ed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Shaohui Xie <shaohui@nxp.com> --- v2: Fix indentaion in commit msg arch/arm/Kconfig | 11 + arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/dts/Makefile| 1 + arch/a

Re: [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()

2017-03-06 Thread Ashish Kumar
Hello Joe, Could you please ack if there are no further queries. Regards Ashish -Original Message- From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Ashish Kumar Sent: Tuesday, February 21, 2017 1:17 PM To: Joe Hershberger <joe.hershber...@gmail.com> Cc: u-boot &

[U-Boot] [PATCH v3] armv8: fsl-lsch3: Instantiate TZASC configuration in 2 groups

2017-04-07 Thread Ashish Kumar
Number of TZASC instances may vary across NXP SoCs. So put TZASC configuration under instance specific defines. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: Fix indentation in commit message arch/arm/c

[U-Boot] [PATCH v5 3/3] whitelist: Remove "CONFIG_SYS_CCI400_ADDR" from whitelist

2017-08-10 Thread Ashish Kumar
This config is depricated and new config SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: This is v3 for https://patchwork.ozlabs.org/patch/731464/ v4: No change v5: NO change scripts/config_whitelist.txt | 1 - 1 file changed, 1 de

[U-Boot] [PATCH v5 2/3] armv7: Consolidate registers space defination for CCI-400 bus

2017-08-10 Thread Ashish Kumar
0 bus from immap_ls102xa to fsl_immap, since same is defined there already "CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: This is v3 for https://patchwork.ozlabs.org/patch/731464/

Re: [U-Boot] [Patch v2 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform

2017-08-11 Thread Ashish Kumar
Hello York, Thanks for your comments, Please see inline, most comments address in v3 Regards Ashish -Original Message- From: York Sun [mailto:york@nxp.com] Sent: Wednesday, April 12, 2017 2:26 AM To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de

[U-Boot] [PATCH v5 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus

2017-08-10 Thread Ashish Kumar
CI-400 bus from immap_lsch2 to fsl_immap, so that it can be used for both chasis 2 and chasis 3. "CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabh

[U-Boot] [PATCH v3 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform

2017-08-11 Thread Ashish Kumar
88a/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1088ARDB + +config SYS_BOARD + default "ls1088a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1088ardb" + +endif

[U-Boot] [PATCH v3 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

2017-08-11 Thread Ashish Kumar
(DPAA2) - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs - QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc Signed-off-by: Alison Wang <alison.w...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.

[U-Boot] [PATCH v3 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus

2017-07-19 Thread Ashish Kumar
CI-400 bus from immap_lsch2 to fsl_immap, so that it can be used for both chasis 2 and chasis 3. "CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabh

[U-Boot] [PATCH v3 2/3] armv7: Consolidate registers space defination for CCI-400 bus

2017-07-19 Thread Ashish Kumar
0 bus from immap_ls102xa to fsl_immap, since same is defined there already "CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: This is v3 for https://patchwork.ozlabs.org/patch/731464/

[U-Boot] [PATCH v3 3/3] whitelist: Remove "CONFIG_SYS_CCI400_ADDR" from whitelist

2017-07-19 Thread Ashish Kumar
This config is depricated and new config SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: This is v3 for https://patchwork.ozlabs.org/patch/731464/ scripts/config_whitelist.txt | 1 - 1 file changed, 1 deletion(-) diff --git a/s

Re: [U-Boot] compilation failure on Powerpc with SPL

2017-07-25 Thread Ashish Kumar
From: Prabhakar Kushwaha Sent: Tuesday, July 25, 2017 4:33 PM To: Ashish Kumar <ashish.ku...@nxp.com>; York Sun <york@nxp.com>; u-boot@lists.denx.de Subject: RE: compilation failure on Powerpc with SPL Hi York, Can you please share details of code-base. Regards, Prabhakar From:

[U-Boot] compilation failure on Powerpc with SPL

2017-07-25 Thread Ashish Kumar
Hello York, Prabhakar, I am seeing build failure on powerpc u-boot with SPL. I have checked B4860QDS_NAND_defconfig and T1040RDB_SDCARD_defconfig common/built-in.o:(.got2+0x2a4): undefined reference to `do_bootd' scripts/Makefile.spl:333: recipe for target 'spl/u-boot-spl' failed make[1]: ***

Re: [U-Boot] [Patch v2 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

2017-07-24 Thread Ashish Kumar
Hello York, Please see response inline Regards Ashish -Original Message- From: York Sun [mailto:york@nxp.com] Sent: Wednesday, April 12, 2017 2:04 AM To: Ashish Kumar <ashish.ku...@nxp.com>; u-boot@lists.denx.de; u-b...@linux.freescale.net Cc: Alison Wang <alison.w..

Re: [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()

2017-07-27 Thread Ashish Kumar
Hello Joe, Sorry for late response, please see inline. Regards Ashish -Original Message- From: Joe Hershberger [mailto:joe.hershber...@gmail.com] Sent: Tuesday, March 07, 2017 3:39 AM To: Ashish Kumar <ashish.ku...@nxp.com> Cc: u-boot <u-boot@lists.denx.de>; Prabha

[U-Boot] [PATCH v3] Makefile: Concatenation of u-boot-spl.bin and u-boot.img

2017-07-26 Thread Ashish Kumar
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape platform SoC: LS1088A/LS2080A and their variants This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: This is v2 version of https://patchwork.ozla

[U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img

2017-07-26 Thread Ashish Kumar
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape platform SoC: LS1088A/LS2080A and their variants This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: This is v2 version of https://patchwork.ozla

Re: [U-Boot] compilation failure on Powerpc with SPL

2017-07-26 Thread Ashish Kumar
Hello York, Thanks for the help. Issue is not observed with toolchain gcc-4.9, Could you please help understand why this is compiler dependent? Regards Ashish -Original Message- From: York Sun Sent: Wednesday, July 26, 2017 12:04 AM To: Ashish Kumar <ashish.ku...@nxp.com>; Pra

Re: [U-Boot] [Patch v2] Makefile: Concatenation of u-boot-spl.bin and u-boot.img

2017-07-26 Thread Ashish Kumar
Hello Tom, Thanks for the comments, please see inline for respone. Regards Ashish -Original Message- From: Tom Rini [mailto:tr...@konsulko.com] Sent: Thursday, July 27, 2017 3:36 AM To: Ashish Kumar <ashish.ku...@nxp.com> Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [Pa

[U-Boot] [PATCH v4 1/3] armv8:fsl-layerscape: Consolidate registers space defination for CCI-400 bus

2017-07-25 Thread Ashish Kumar
CI-400 bus from immap_lsch2 to fsl_immap, so that it can be used for both chasis 2 and chasis 3. "CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabh

[U-Boot] [PATCH v4 2/3] armv7: Consolidate registers space defination for CCI-400 bus

2017-07-25 Thread Ashish Kumar
0 bus from immap_ls102xa to fsl_immap, since same is defined there already "CONFIG_SYS_CCI400_ADDR" is depricated and new SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: This is v3 for https://patchwork.ozlabs.org/patch/731464/ v4:

[U-Boot] [PATCH v4 3/3] whitelist: Remove "CONFIG_SYS_CCI400_ADDR" from whitelist

2017-07-25 Thread Ashish Kumar
This config is depricated and new config SYS_CCI400_OFFSET is introduced in Kconfig Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: This is v3 for https://patchwork.ozlabs.org/patch/731464/ v4: No change scripts/config_whitelist.txt | 1 - 1 file changed, 1 deletion(-) diff

[U-Boot] [PATCH 2/3] arm, Makefile: Concatenation of u-boot-spl.bin and u-boot.img

2017-04-27 Thread Ashish Kumar
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape platform SoC: LS1088A/LS2080A and their variants New Kconfig option added SPL_USE_HEADER for the same Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- Makefile | 14 +- ar

[U-Boot] [RFC 2/2] armv8, fsl-layerscape: Add SD boot support for LS1088AQDS

2017-04-28 Thread Ashish Kumar
Add SD boot support for LS1088QDS Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Raghav Dogra <raghav.do...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/Kconfig | 3 +++ configs/ls1088aqds_sdc

[U-Boot] [RFC 1/2] armv8, fsl-layerscape: Add SD boot support for LS1088A

2017-04-28 Thread Ashish Kumar
Add SD boot support for LS1088ARDB Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Raghav Dogra <raghav.do...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/Kconfig | 3 +++ configs/ls1088ardb_sdc

[U-Boot] [PATCH v4 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform

2017-08-17 Thread Ashish Kumar
B + +config SYS_BOARD + default "ls1088a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1088ardb" + +endif diff --git a/board/freescale/ls1088a/MAINTAINERS

[U-Boot] [PATCH v4 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

2017-08-17 Thread Ashish Kumar
2.0 (DPAA2) - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs - QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc Signed-off-by: Alison Wang <alison.w...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.

[U-Boot] [PATCH] armv8: fsl-lsch3: Make CCN-504 related code conditional

2017-08-17 Thread Ashish Kumar
LS2080 family has CCN-504 cache coherent interconnet. Other SoCs from LSCH3 may have differnt interconnect like LS1088. Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> --- For clean git am this "http://patchwork

[U-Boot] [PATCH] armv8: fsl-layerscape: Put SATA code under SATA configs

2017-08-17 Thread Ashish Kumar
It is not necessary for every SoC to have 2 SATA controller. So put SATA1, SATA2 code under respective defines. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4 1

[U-Boot] [PATCH v2 2/2] board:ls1088aqds: Add support of EC1 and EC2

2017-08-18 Thread Ashish Kumar
From: Prabhakar Kushwaha EC1 and EC2 are RGMII interface on ls1088aqds platform. This patch add support of RGMII with PHY and MDIO Signed-off-by: Prabhakar Kushwaha Signed-off-by: Amrita Kumari --- depends upon

[U-Boot] [PATCH v2 1/2] armv8: fsl-layerscape: Support to add RGMII for ls1088aqds

2017-08-18 Thread Ashish Kumar
This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com> Signed-off-by: Ashish Kuma

[U-Boot] [PATCH v4 3/3] armv8: ls1088aqds: Add support of LS1088AQDS

2017-08-17 Thread Ashish Kumar
ed-off-by: Shaohui Xie <shaohui@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Fix indentaion in commit msg v3: Not sent v4: Review comments on V2 fixed PPA enabled README added arch/arm/Kconfig | 13 + arch/arm/cpu/armv8/Kconfig

Re: [U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot

2017-09-13 Thread Ashish Kumar
Hello Ran, Could you please help here to convert to Kconfig option? Regards Ashish -Original Message- From: Bin Meng [mailto:bmeng...@gmail.com] Sent: Wednesday, September 13, 2017 2:15 PM To: Ashish Kumar <ashish.ku...@nxp.com> Cc: U-Boot Mailing List <u-boot@lists.denx.de

[U-Boot] [PATCH v2] armv8: ls1088: Move CONFIG_ENV_IS_IN_SPI_FLASH to defconfig

2017-10-11 Thread Ashish Kumar
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Reword commit msg configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088ardb_qspi_defconfig | 1 + include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - 4 files changed, 2 insertions(+), 2 deletions(-)

[U-Boot] [PATCH] armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID

2017-10-12 Thread Ashish Kumar
Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID PHY_INTERFACE_MODE_RGMII_TXID. These change where introduced in phy driver in commit titled "net: phy: realtek: fix enabling of the TX-delay for RTL8211F" Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> ---

[U-Boot] [PATCH 1/2] ls1088ardb: Enable USB command RDB qspi-boot

2017-09-13 Thread Ashish Kumar
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com> --- v1: Rebased to ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1 arch/arm/dts/fsl-ls1088a.dtsi | 14 ++ configs/ls1088ardb_qspi_de

[U-Boot] [PATCH 2/2] ls1088aqds: Enable USB command on QDS for qspi-boot

2017-09-13 Thread Ashish Kumar
Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v1: Rebased to ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1 configs/ls1088aqds_qspi_defconfig | 8 include/configs/ls1088aqds.h | 5 + 2 f

[U-Boot] [PATCH 2/2] ls1088aqds: Add SCSI related configs in header file for qds

2017-09-13 Thread Ashish Kumar
Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v1: Rebased to ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1 Depends upon: http://patchwork.ozlabs.org/project/uboot/list/?series=2826 include/configs/ls108

[U-Boot] [PATCH 1/2] ls1088ardb: Add SCSI related configs in header file for RDB

2017-09-13 Thread Ashish Kumar
Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v1: Rebased to ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1 Depends upon: http://patchwork.ozlabs.org/project/uboot/list/?series=2826 arch/arm/cpu/armv8/fs

[U-Boot] [PATCH v3 2/2] armv8: ls1088aqds: Add support of EC1 and EC2

2017-08-31 Thread Ashish Kumar
com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v3: Add missing singoff board/freescale/ls1088a/eth_ls1088aqds.c | 34 1 file changed, 34 insertions(+) diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.

[U-Boot] [PATCH v3 1/2] armv8: fsl-layerscape: Support to add RGMII for ls1088aqds

2017-08-31 Thread Ashish Kumar
This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com> Signed-off-by: Ashish Kuma

[U-Boot] [PATCH v3 1/2] armv8: fsl-lsch3: Add SD boot support for LS1088ARDB

2017-08-31 Thread Ashish Kumar
Add SD boot support for LS1088ARDB Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Raghav Dogra <raghav.do...@nxp.com> --- v3: Depends upon http://patchwork.ozlabs.org/patch/794217/ Rebase to t

[U-Boot] [PATCH v3 2/2] armv8: fsl-lsch3: Add SD boot support for ls1088aqds

2017-08-31 Thread Ashish Kumar
Add support for SD boot for QDS for ls1088 paltform Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Raghav Dogra <raghav.do...@nxp.com> --- v3: Depends upon http://patchwork.ozlabs.org/patch/7942

[U-Boot] [PATCH v5 2/3] armv8: ls1088ardb: Add support for LS1088ARDB platform

2017-08-31 Thread Ashish Kumar
b/board/freescale/ls1088a/Kconfig new file mode 100644 index 000..a4d8223 --- /dev/null +++ b/board/freescale/ls1088a/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1088ARDB + +config SYS_BOARD + default "ls1088a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC +

[U-Boot] [PATCH v5 1/3] armv8: ls1088a: Add NXP LS1088A SoC support

2017-08-31 Thread Ashish Kumar
2.0 (DPAA2) - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs - QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc Signed-off-by: Alison Wang <alison.w...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.

[U-Boot] [PATCH v5 3/3] armv8: ls1088aqds: Add support of LS1088AQDS

2017-08-31 Thread Ashish Kumar
ed-off-by: Shaohui Xie <shaohui@nxp.com> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v5: Fix checkpatch's check Change getenv() to env_get() Rebase to top commit "8b3cec7 mtdparts: Fix uninitialized scalar usage" arch/arm/Kconfig | 13 +

[U-Boot] [PATCH] armv8: ls1088: Move CONFIG_ENV_IS_IN_SPI_FLASH for platform header files to defconfig

2017-10-10 Thread Ashish Kumar
savee command was not available in ls1088 u-boot, this patch fixed the same Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- configs/ls1088aqds_qspi_defconfig | 1 + configs/ls1088ardb_qspi_defconfig | 1 + include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h |

[U-Boot] [Patch v2 2/2] armv8: ls1088: introduce CONFIG_SGMII_PHYLIB

2017-11-13 Thread Ashish Kumar
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: Add dependent patch set README| 6 ++ arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 +++ board/freescale/ls1088a/eth_ls1088aqds.c | 7 +++ 3 files changed, 20 insertions(+) diff

[U-Boot] [Patch v2 1/2] driver: net: ldpaa_eth: Add PHY-less SGMII support

2017-11-13 Thread Ashish Kumar
In case of PHY-less mode, there is no interaction with PHY so auto-neg etc is not required and link will have fixed attributes Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> --- v2: Add dependent patch set drivers/n

[U-Boot] [PATCH] armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfig

2017-11-23 Thread Ashish Kumar
Unset USE_BOOTCOMMAND for all ls1088 defconfig files to fix redefinition error USE_BOOTCOMMAND was introduced in commit-id b6251db8c3f ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- configs/ls1088aqd

[U-Boot] [PATCH] armv8: ls1088a: Add nand support for ls1088ardb

2017-11-27 Thread Ashish Kumar
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- The WIP mentioned in commit-id "e84a324ba7950e88c" ("armv8: ls1088ardb: Add support for LS1088ARDB platform") This is not related to LS1088, it is related to IFC frame work. Logs below: NAND erase: device 0 off

Re: [U-Boot] [Patch v2 1/2] driver: net: ldpaa_eth: Add PHY-less SGMII support

2017-11-29 Thread Ashish Kumar
Hello Joe, York, Any comments on V2 series? http://patchwork.ozlabs.org/project/uboot/list/?series=13261 Regards Ashish From: Ashish Kumar <ashish.ku...@nxp.com> Sent: Monday, November 13, 2017 3:07 PM To: u-boot@lists.denx.de Cc: York Sun; joe.he

[U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR

2017-12-14 Thread Ashish Kumar
Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- include/configs/ls1088a_common.h | 6 ++ include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 2 +- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/configs/ls1088a_common.h b/include/c

[U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR

2017-12-14 Thread Ashish Kumar
ENV variables can now be used before relocation. Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com> --- v2: replace & with && in #if Tested on ls1088ardb. Tested on ls1012hexa after defining CONFIG_ENV_ADDR env/sf.c | 21 + 1 file changed, 21 insertions(+)

  1   2   3   >