Hi Wolfgang,
On Wed, Jun 27, 2012 at 03:12:07, Wolfgang Denk wrote:
Dear Prabhakar Lad,
In message 1340708826-26707-1-git-send-email-prabhakar@ti.com you wrote:
From: Alagu Sankar alagusan...@embwise.com
This is a Linux command line tool specific to TI's Davinci platforms, for
Hi Tyler/Christian,
On Fri, Jul 27, 2012 at 00:24:20, Tyler Olmstead wrote:
Hi Christian,
On Thu, Jul 26, 2012 at 10:03 AM, Christian Riesch
christian.rie...@omicron.at wrote:
[cc'd Prabhakar Lad, Tom Rini, and Scott Wood]
Tyler,
On Thu, Jul 26, 2012 at 5:37 PM, Tyler Olmstead
Hi Tom,
On Tue, Jun 05, 2012 at 03:58:03, Rini, Tom wrote:
On Fri, Jun 01, 2012 at 08:00:43PM +0530, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
This patch adds support for MMC/SD on DA850/OMAP-L138.
[snip]
+/* SD/MMC */
+#define CONFIG_MMC
+#define
negotiation in RMII mode.
Without this patch, EMAC initialization takes more time and sometimes
tftp fails in RMII mode.
Signed-off-by: Rajashekhara, Sudhakar sudhakar@ti.com
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
Signed-off-by: Hadli, Manjunath manjunath.ha...@ti.com
Hi Tom,
On Tue, Jun 05, 2012 at 04:02:01, Rini, Tom wrote:
On Fri, Jun 01, 2012 at 08:00:49PM +0530, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com
This patch adds support for direct NOR boot mode on da850/omap-l138.
Define the CONFIG_DIRECT_NOR_BOOT macro along
Hi Christian,
On Tue, Jun 05, 2012 at 15:33:07, Christian Riesch wrote:
Hi,
On Fri, Jun 1, 2012 at 4:30 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Lad, Prabhakar prabhakar@ti.com
This patch adds support for MMC/SD on DA850/OMAP-L138.
Signed-off-by: Lad, Prabhakar
Hi Christian,
On Tue, Jun 05, 2012 at 15:38:53, Christian Riesch wrote:
Hi,
On Fri, Jun 1, 2012 at 3:48 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Rajashekhara, Sudhakar sudhakar@ti.com
According to DA850/OMAP-L138 schematics, GP2[6] line has to be driven
high for RMII
Hi Christian,
On Tue, Jun 05, 2012 at 16:56:01, Christian Riesch wrote:
Hi,
On Fri, Jun 1, 2012 at 4:30 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Lad, Prabhakar prabhakar@ti.com
This patch adds support for NAND SPL on DA850/OMAP-L138.
Signed-off-by: Lad, Prabhakar
Hi Christian,
On Tue, Jun 05, 2012 at 17:04:13, Christian Riesch wrote:
Hi,
On Fri, Jun 1, 2012 at 3:34 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Rajashekhara, Sudhakar sudhakar@ti.com
On DA850/OMAP-L138 it was observed that in RMII mode,
auto negotiation
Hi Eric,
On Wed, Jun 06, 2012 at 22:47:46, Eric Bénard wrote:
Hi Prabhakar,
Le Fri, 1 Jun 2012 19:04:37 +0530,
Prabhakar Lad prabhakar@ti.com a écrit :
From: Rajashekhara, Sudhakar sudhakar@ti.com
On DA850/OMAP-L138 it was observed that in RMII mode,
auto negotiation
Hi Christian,
On Tue, Jun 19, 2012 at 01:09:08, Christian Riesch wrote:
Hi,
Sorry for the delay, had a lot of other work to do :-/
On Thursday, June 7, 2012, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com javascript:;
DA850/OMAP-L138 does
Hi Christian,
On Wed, Jun 20, 2012 at 14:50:41, Christian Riesch wrote:
Hi Prabhakar,
On Tue, Jun 19, 2012 at 7:06 AM, Lad, Prabhakar prabhakar@ti.com wrote:
Hi Christian,
On Tue, Jun 19, 2012 at 01:09:08, Christian Riesch wrote:
Hi,
Sorry for the delay, had a lot of other work
From: Lad, Prabhakar prabhakar.cse...@gmail.com
The spl_mmc_load() was removed while converting to
CONFIG_SPL_FRAMEWORK usage the definition was removed
but the declaration was missed. This patch removes this
declaration.
Signed-off-by: Lad, Prabhakar prabhakar.cse...@gmail.com
---
include
Hi Masahiro,
On Wed, Apr 8, 2015 at 10:15 AM, Masahiro Yamada
yamada.masah...@socionext.com wrote:
In spite of several times alerts, there are still many boards
left unconverted.
This series removes some of non-generic (=unmaitained) boards.
If there is a problem with this series, please
Hi Tom,
Thanks for the quick reply.
On Thu, Oct 22, 2015 at 12:22 PM, Tom Rini <tr...@konsulko.com> wrote:
> On Thu, Oct 22, 2015 at 12:12:32PM +0100, Lad, Prabhakar wrote:
>
>> Copy the MLO and u-boot.bin to SD card boot partition which is
>> bootable, I see no prints c
Hi Tom,
I was trying the latest master branch for ti8148 evm to boot from SD
card, following are the steps which I followed:
1: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi- clean distclean
2: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi- ti814x_evm_config
3: make ARCH=arm
During spi transfer, for example:
sspi 1:1.0 8 ff
the rx_len values will be:
rx_len = 0
rx_len = 4294967295
This caused a busy looping during xfer, this patch fixes it
by adding a check while reading the rx fifo
Signed-off-by: Lad, Prabhakar <prabhakar@racelogic.co.uk>
Cc: Michal
Hi Jagannadha,
I am working on the zynq board, we have spi0 connected to flash chip,
which works fine. The spi1 is connected to display we want to use sspi
command to power up the display.
I have enabled, the CONFIG_SPI command, but when I use the sspi
command I get tx timeouts.
Cheers,
Hello,
I have a display connected to spi-1, there is no driver for display,
we want to use sspi commands to program the display. since there isnt
any device node to spi-1 connected and when issued with sspi commands
it returns with invalid device 1:0
Cheers,
--Prabhakar Lad
Hi Simon,
On Sat, May 14, 2016 at 8:34 PM, Simon Glass <s...@chromium.org> wrote:
> Hi,
>
> On 13 May 2016 at 10:58, Lad, Prabhakar <prabhakar.cse...@gmail.com> wrote:
>>
>> Hello All,
>>
>> It's quite a long time, since I touched u-boot code, I was
Hello All,
It's quite a long time, since I touched u-boot code, I was working on
adding a slave SPI device to DM, can anyone point me to a sample
driver.
Cheers,
--Prabhakar Lad
___
U-Boot mailing list
U-Boot@lists.denx.de
From: "Lad, Prabhakar" <prabhakar.cse...@gmail.com>
During spi transfer, for example:
sspi 1:1.0 8 ff
the rx_len values will be:
rx_len = 0
rx_len = 4294967295
This caused a busy looping during xfer, this patch fixes it
by adding a check while reading the rx fifo
Signed-off-by
On Thu, Jul 21, 2016 at 7:58 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote:
> On 23 June 2016 at 19:28, Lad, Prabhakar <prabhakar.cse...@gmail.com> wrote:
>> During spi transfer, for example:
>> sspi 1:1.0 8 ff
>>
>> the rx_len values will be:
>&g
On Thu, Jun 23, 2016 at 2:58 PM, Lad, Prabhakar
<prabhakar.cse...@gmail.com> wrote:
> During spi transfer, for example:
> sspi 1:1.0 8 ff
>
> the rx_len values will be:
> rx_len = 0
> rx_len = 4294967295
>
> This caused a busy looping during xfer, this patch fixe
On Sat, Jul 23, 2016 at 5:19 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote:
>
> On 23 June 2016 at 19:28, Lad, Prabhakar <prabhakar.cse...@gmail.com> wrote:
> > During spi transfer, for example:
> > sspi 1:1.0 8 ff
> >
> > the rx_len values will
On Wed, Sep 23, 2020 at 11:27 AM Lad Prabhakar
wrote:
>
> Hi All,
>
> This patch series includes trivial fixes and enhancements to
> renesas pfc driver.
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (3):
> pinctrl: renesas: Drop unused members from struct sh_pfc_p
Import R8A774C0 (RZ/G2E) SoC DTSI and headers from Linux 5.9
commit bbf5c979011a ("Linux 5.9").
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/dts/r8a774c0.dtsi| 1960 +
include/dt-bindings/clock/r8a774c0-cpg-mssr.h | 61 +
Hi All,
This patch series imports DTSI and clocks from Linux 5.9
for R8A774C0 (RZ/G2E) SoC.
This series applies on top of [1].
[1] https://github.com/marex/u-boot-sh/tree/next
Cheers,
Prabhakar
Lad Prabhakar (3):
arm: renesas: Add config option for R8A774C0 SoC
arm: dts: r8a774c0: Import
Add config support for RZ/G2E (a.k.a R8A774C0) SoC.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/mach-rmobile/Kconfig.64 | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index 59cb072096..b80505db26
Import RZ/G2E (R8A774C0) clock tables from Linux 5.9 commit
bbf5c979011a ("Linux 5.9").
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/mach-rmobile/Kconfig.64| 1 +
drivers/clk/renesas/Kconfig | 6 +
drivers/clk/renesas/Makefile
do_save() function defined in fs.c also supports FAT file system
re-use the same for fatwrite command.
Also fix the FAT test script to match the expected output.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
v1->v2
* Fixed FAT test scripts
* Sandbox test results: 655 passed,
Sync the R8A77990 SoC PFC tables with Linux 5.9 , commit bbf5c979011a.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
v2->v3
* Synced with Linux 5.9 instead of 5.8.
* Updated commit message.
v1->v2
* Updated commit message
* Synced with Linux 5.8 instead of 5.9.rc4
v1:
On Thu, Sep 17, 2020 at 3:50 PM Lad Prabhakar
wrote:
>
> Add Winbond W25M512JV flash device description.
>
> Linux already has the flash entry present. A snippet below:
> { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024...},
>
> Signed-off-by: Lad Pra
d set to
1 and rcar_i2c_write_common() called rcar_i2c_set_addr() with read set 0.
Fixes: 7c8f821e ("i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer")
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
v1->v2
* Incorporated suggestion from Heiko
v1:
https://patchwork.ozlabs.
Hi Marek,
Thank you for the review.
On Wed, Sep 30, 2020 at 10:57 AM Marek Vasut wrote:
>
> On 9/30/20 11:16 AM, Lad Prabhakar wrote:
> [...]
> > diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
> > index 4267bbfa5a..e76201df6b 100644
> > --- a/drive
Hi Heiko,
Thank you for the review.
On Wed, Sep 30, 2020 at 8:18 AM Heiko Schocher wrote:
>
> Hello Lad,
>
> Am 21.09.2020 um 18:33 schrieb Lad Prabhakar:
> > This reverts commit 7c8f821e ("i2c: rcar_i2c: Set the
> > slave address from rcar_i2c_xfer"), as it bl
d set to
1 and rcar_i2c_write_common() called rcar_i2c_set_addr() with read set 0.
Fixes: 7c8f821e ("i2c: rcar_i2c: Set the slave address from rcar_i2c_xfer")
Signed-off-by: Lad Prabhakar
---
v2->v3
* Made sure value of read is ether 0/1 as pointed by Marek
v1->v2
* Incorporated suggest
The R8A774A1 is compatible with the generic rcar-gen3-xhci controller.
This patch adds the compatibility flag, to support the xHCI controller.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/usb/host/xhci-rcar.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb
d set to 1 and rcar_i2c_write_common() called
rcar_i2c_set_addr() with read set 0.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/i2c/rcar_i2c.c | 14 +-
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c
index
Sync the R8A77990 SoC PFC tables with Linux 5.8 , commit bcf876870b95.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
v1->v2
* Updated commit message
* Synced with Linux 5.8 instead of 5.9.rc4
---
drivers/pinctrl/renesas/pfc-r8a77990.c | 57 ++
1 file chan
do_save() function defined in fs.c also supports FAT file system
re-use the same for fatwrite command.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
cmd/fat.c | 43 +--
1 file changed, 1 insertion(+), 42 deletions(-)
diff --git a/cmd/fat.c b
Return -ENOTSUPP if bitlen cannot be handled by the controller
during xfer.
This fixes board reset when sspi command is hit with no arguments
where bitlen is passed as 0.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/spi/renesas_rpc_spi.c | 2 +-
1 file changed, 1 insertion
Implement get_pin_muxing() callback so that pinmux status
command can be used on Renesas platforms.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 31 +++
1 file changed, 31 insertions(+)
diff --git a/drivers/pinctrl/renesas
Hi All,
This patch series includes trivial fixes and enhancements to
renesas pfc driver.
Cheers,
Prabhakar
Lad Prabhakar (3):
pinctrl: renesas: Drop unused members from struct sh_pfc_pinctrl
pinctrl: renesas: Make sure the pin type is updated after setting the
MUX
pinctrl: renesas
Drop unused members from struct sh_pfc_pinctrl.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 4
1 file changed, 4 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc.c b/drivers/pinctrl/renesas/pfc.c
index f79dc411d8..6cccd33c40 100644
Update pin type after every successful call to sh_pfc_config_mux().
This fixes pin functionality from being overwritten.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 19 ---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git
Add Winbond W25M512JV flash device description.
Linux already has the flash entry present. A snippet below:
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024...},
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/mtd/spi/spi-nor-ids.c | 1 +
1 file changed, 1 insertio
Renesas Ebisu board is based on R-Car E3 SoC which has dual CA53 and
a CR7.
This patch drops check for cputype from reset_cpu() and also drops the
corresponding CA57 macros. While at it also dropped RST_RSTOUTCR macro
which is unused.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
Sync the R8A77990 SoC PFC with mainline linux 5.9-rc4 commit
f4d51dffc6c0 ("Linux 5.9-rc4")
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc-r8a77990.c | 57 ++
1 file changed, 30 insertions(+), 27 deletions(-)
diff --git
Implement get_pin_muxing() callback so that pinmux status
command can be used on Renesas platforms.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 25 +
1 file changed, 25 insertions(+)
diff --git a/drivers/pinctrl/renesas/pfc.c
early with success in this case as the pin is already muxed.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 52 +++
1 file changed, 47 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc.c b/drivers/pinctrl
atch 2/2 unchanged
v1->v2
* Patch 1/2 updated commit message
* Patch 2/2 unchanged
Lad Prabhakar (2):
pinctrl: renesas: Make sure the pin type is updated after setting the
MUX
pinctrl: renesas: Implement get_pin_muxing() callback
drivers/pinctrl/renesas/p
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
Squashed the changes into single patch.
---
arch/arm/dts
Hi Marek,
Thank you for the review.
On Sun, Nov 29, 2020 at 1:06 PM Marek Vasut wrote:
>
> On 11/18/20 12:32 PM, Prabhakar Mahadev Lad wrote:
>
> [...]
>
> >> Subject: [PATCH 4/8] M: dts: r8a77950-u-boot: Remove leading 0x from rpc
> >> node
> >>
> > I missed the typo in the subject s/M/ARM
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77980-u-boot.dtsi | 2 +-
1 file changed, 1 inse
Hi All,
This patch series drops leading 0x from rpc nodes.
Cheers,
Prabhakar
Lad Prabhakar (8):
ARM: dts: r8a77965-u-boot: Remove leading 0x from rpc node
ARM: dts: r8a77990-u-boot: Remove leading 0x from rpc node
ARM: dts: 8a77980-u-boot: Remove leading 0x from rpc node
M: dts
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77950-u-boot.dtsi | 2 +-
1 file changed, 1 inse
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77965-u-boot.dtsi | 2 +-
1 file changed, 1 inse
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77990-u-boot.dtsi | 2 +-
1 file changed, 1 inse
Renesas RZ/G2E (a.k.a. r8a774c0) is pin compatible with R-Car
E3 (a.k.a. r8a77990), however it doesn't have several automotive
specific peripherals.
This patch hooks R8A774C0 SoC with the pfc driver.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/mach-rmobile/Kconfig.64 | 1
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77995-u-boot.dtsi | 2 +-
1 file changed, 1 inse
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r7s72100-gr-peach-u-boot.dts | 2 +-
1 file change
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77960-u-boot.dtsi | 2 +-
1 file changed, 1 inse
Remove the leading "0x" from rpc node to fix the below dtc warning:
Warning (simple_bus_reg): Node /soc/rpc@0xee20 simple-bus unit
address format error, expected "ee20"
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a77970-u-boot.dtsi | 2 +-
1 file changed, 1 inse
rek.
* Patch 2/2 unchanged
v1->v2
* Patch 1/2 updated commit message
* Patch 2/2 unchanged
Lad Prabhakar (2):
pinctrl: renesas: Make sure the pin type is updated after setting the
MUX
pinctrl: renesas: Implement get_pin_muxing() callback
drivers/pinctrl/renesas/pfc.
to
sh_pfc_config_mux() and thus fixing from pin functionality to be
overwritten. Also a warning message is printed if the current pin is being
overwritten before abort.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 28 +++-
1 file changed, 23
Implement get_pin_muxing() callback so that pinmux status
command can be used on Renesas platforms.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 31 +++
1 file changed, 31 insertions(+)
diff --git a/drivers/pinctrl/renesas
Implement get_pin_muxing() callback so that pinmux status
command can be used on Renesas platforms.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 31 +++
1 file changed, 31 insertions(+)
diff --git a/drivers/pinctrl/renesas
Update pin type after every successful call to sh_pfc_config_mux().
This fixes pin functionality from being overwritten.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 19 ---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git
Hi All,
This patch series includes trivial fixes and enhancements to
renesas pfc driver.
This is exactly the same series posted earlier [1].
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=203651
Cheers,
Prabhakar
Lad Prabhakar (3):
pinctrl: renesas: Drop unused members from
Drop unused members from struct sh_pfc_pinctrl.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 4
1 file changed, 4 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc.c b/drivers/pinctrl/renesas/pfc.c
index db0fa9b728..fb811a95bc 100644
Hi Marek,
Thank you for the review.
On Wed, Nov 4, 2020 at 7:29 PM Marek Vasut wrote:
>
> On 11/4/20 6:27 PM, Lad Prabhakar wrote:
> > Update pin type after every successful call to sh_pfc_config_mux().
> >
> > This fixes pin functionality from being overwritten.
>
&g
to
sh_pfc_config_mux() and thus fixing from pin functionality to be
overwritten.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 19 ---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc.c b/drivers/pinctrl
Hi All,
This patch series includes trivial fixes and enhancements to
renesas pfc driver.
Cheers,
Prabhakar
v1->v2
* Patch 1/2 updated commit message
* patch 2/2 unchanged
Lad Prabhakar (2):
pinctrl: renesas: Make sure the pin type is updated after setting the
MUX
pinctrl: rene
Implement get_pin_muxing() callback so that pinmux status
command can be used on Renesas platforms.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc.c | 31 +++
1 file changed, 31 insertions(+)
diff --git a/drivers/pinctrl/renesas
4 +-
> drivers/clk/renesas/r8a774b1-cpg-mssr.c | 8
> drivers/clk/renesas/r8a774c0-cpg-mssr.c | 9 +
> 3 files changed, 26 insertions(+), 5 deletions(-)
>
Tested on RZ/G2{EMN} boards.
Tested-by: Lad Prabhakar
Cheers,
Prabhakar
> diff --git a/driver
Signed-off-by: Hai Pham
> Signed-off-by: Marek Vasut
> ---
> drivers/clk/renesas/clk-rcar-gen3.c | 19 ++-
> drivers/clk/renesas/rcar-gen3-cpg.h | 3 +++
> 2 files changed, 17 insertions(+), 5 deletions(-)
>
Tested on RZ/G2E board
Tested-by: Lad Prabhakar
Che
vers/clk/renesas/clk-rcar-gen3.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Tested on RZ/G2E board
Tested-by: Lad Prabhakar
Cheers,
Prabhakar
> diff --git a/drivers/clk/renesas/clk-rcar-gen3.c
> b/drivers/clk/renesas/clk-rcar-gen3.c
> index 3223becd75..09d84c44e
7980-cpg-mssr.c | 1 +
> drivers/clk/renesas/r8a77990-cpg-mssr.c | 1 +
> drivers/clk/renesas/r8a77995-cpg-mssr.c | 1 +
> drivers/clk/renesas/rcar-gen2-cpg.h | 2 ++
> drivers/clk/renesas/rcar-gen3-cpg.h | 2 ++
> drivers/clk/renesas/renesas-cpg-mssr.h | 1 +
> 20 files cha
2 ++
> 3 files changed, 65 insertions(+), 45 deletions(-)
>
Tested on RZ/G2{EHMN} board
Tested-by: Lad Prabhakar
Cheers,
Prabhaka
> diff --git a/drivers/clk/renesas/clk-rcar-gen3.c
> b/drivers/clk/renesas/clk-rcar-gen3.c
> index 27939d6318..49ab9134af 1006
ltiplication is fixed factor
> or coming from CRx register. Deduplicate the code into a single function.
>
> Signed-off-by: Marek Vasut
> ---
> drivers/clk/renesas/clk-rcar-gen3.c | 86 ++---
> 1 file changed, 43 insertions(+), 43 deletions(-)
>
Tested on R
vers/gpio/gpio-rcar.c | 13 ++---
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
Tested on RZ/G2{EHMN} boards
Tested-by: Lad Prabhakar
Cheers,
Prabhakar
> diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
> index daaac5e784..5f1ec39a9b 100644
> --- a/driv
ned-off-by: Marek Vasut
> ---
> drivers/pinctrl/renesas/pfc.c| 39
> drivers/pinctrl/renesas/sh_pfc.h | 2 +-
> 2 files changed, 20 insertions(+), 21 deletions(-)
>
Tested on RZ/G2{EHMN} boards
Tested-by: Lad Prabhakar
Cheers,
Prabhakar
> d
Hi Marek,
Thank you for the review.
On Mon, Mar 15, 2021 at 11:40 PM Marek Vasut wrote:
>
> On 3/15/21 11:07 PM, Lad Prabhakar wrote:
> > Enable building SPL for HiHope RZ/G2[HMN] boards.
>
> What is the reason for building the SPL ?
>
To enable support for recovery using
Enable building SPL for HiHope RZ/G2[HMN] boards.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
board/hoperun/hihope-rzg2/Makefile | 4
configs/hihope_rzg2_defconfig | 2 +-
include/configs/rcar-gen3-common.h | 4 +++-
3 files changed, 8 insertions(+), 2 deletions(-)
diff
Hi All,
This patch series adds support for Silicon Linux EK874 board support
which is based on Renesas R8A774C0 SoC.
Cheers,
Prabhakar
Lad Prabhakar (5):
arm: dts: r8a774c0: Resync R8A774C0 SoC DTSI with Linux 5.11
pinctrl: renesas: pfc-r8a77990: Sync PFC tables with Linux 5.11
pinctrl
Sync the R8A77990 SoC PFC tables with Linux 5.11 , commit f40ddce88593.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
drivers/pinctrl/renesas/pfc-r8a77990.c | 87 +-
1 file changed, 85 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc
Renesas RZ/G2E (a.k.a. r8a774c0) is pin compatible with R-Car
E3 (a.k.a. r8a77990), however it doesn't have several automotive
specific peripherals.
This patch hooks R8A774C0 SoC with the pfc driver.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/mach-rmobile/Kconfig.64 | 1
Resync the R8A774C0 SoC DTSI with Linux kernel 5.11 commit f40ddce88593
("Linux 5.11").
Signed-off-by: Lad Prabhakar
---
arch/arm/dts/r8a774c0.dtsi | 27 +++
1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/r8a774c0.dtsi b/arch/arm/dt
Enable building SPL for EK874 board which is based on R8A774C0 SoC.
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/mach-rmobile/Makefile | 2 +-
board/silinux/ek874/Makefile| 4
configs/silinux_ek874_defconfig | 2 +-
3 files changed, 6 insertions(+), 2 deletions
-boot.dtsi
have been imported from Linux kernel 5.11 commit f40ddce88593
("Linux 5.11").
Signed-off-by: Lad Prabhakar
Reviewed-by: Biju Das
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/cat875.dtsi | 64
arch/arm/dts/r8a774c0-cat874.dts
91 matches
Mail list logo