Re: [U-Boot] [PATCH 01/11] i2c: Clean drivers/i2c/ Makefile

2008-08-19 Thread Michal Simek
[EMAIL PROTECTED], In message [EMAIL PROTECTED] you wrote: From: Michal Simek [EMAIL PROTECTED] Signed-off-by: Michal Simek [EMAIL PROTECTED] --- drivers/i2c/Makefile | 10 +- drivers/i2c/fsl_i2c.c |2 -- drivers/i2c/mxc_i2c.c |2 +- drivers/i2c

Re: [U-Boot] [PATCH] ppc440: New board: Avnet Virtex5 FXT Evaluation

2008-08-24 Thread Michal Simek
-boot and in his private repo will do folder with names which he choose. Best regards, Michal Best regards On Sat, Aug 23, 2008 at 15:05, Michal Simek [EMAIL PROTECTED] wrote: Hi Ricardo, Stefan and Wolfgang, I looked at patches which Ricardo sent. It is really nice to see that someone

Re: [U-Boot] [PATCH] ppc440: New board: Avnet Virtex5 FXT Evaluation

2008-08-25 Thread Michal Simek
Hi, Hello Again Michal, on xilinx boards almost everything can be handled by edk+xparameters, but in other boards this is not true. Last month I was working on a board that had a weird watchdog and a memory that needed to handled by a propietary IP, in this case, we need a board

Re: [U-Boot] [PATCH] ppc440: New board: Avnet Virtex5 FXT Evaluation

2008-08-25 Thread Michal Simek
something today after. Regards On Mon, Aug 25, 2008 at 05:33, Michal Simek [EMAIL PROTECTED] wrote: Hi Stefan, Hi Michal, Hi Ricardo, On Sunday 24 August 2008, Michal Simek wrote: I agree with you that the code of ml507 and other board with that fpga will be almost

Re: [U-Boot] [PATCH] ppc44x: RFC: Unification of virtex5 pp440 boards

2008-08-26 Thread Michal Simek
And one more thing. I would like to see readme in one board folder where will be written what design it is. If you use reference design from xilinx page please write it. Or if is the design from BSB just write it to this file. M Ricardo Ribalda Delgado wrote: Hi Stefan First of all: Thanks

Re: [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot

2012-01-11 Thread Michal Simek
to compile u-boot with ll_temac and test it on qemu every day. Thanks, Michal -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian ___ U

Re: [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot

2012-01-12 Thread Michal Simek
-- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u

Re: [U-Boot] [PATCH 1/6] net: ll_temac: Add LL TEMAC driver to u-boot

2012-01-26 Thread Michal Simek
communication + * + * Copyright (C) 2011 - 2012 Stephan Linz l...@li-pro.net + * Copyright (C) 2008 - 2011 Michal Simek mon...@monstr.eu + * Copyright (C) 2008 - 2011 PetaLogix + * + * Based on Yoshio Kashiwagi kashiw...@co-nss.co.jp driver + * Copyright (C) 2008 Nissin Systems Co.,Ltd. + * March 2008

Re: [U-Boot] [PATCH 2/8] microblaze: Enable several ethernet driver compilation

2012-01-31 Thread Michal Simek
Stephan Linz wrote: U-Boot's multipple network supports enables to use several ethernet drivers but microblaze-generic platform config file select only one driver. Reported-by: Michal Simek mon...@monstr.eu Signed-off-by: Stephan Linz l...@li-pro.net --- include/configs/microblaze-generic.h

Re: [U-Boot] [PATCH 6/8] microblaze: Add faked LL_TEMAC driver configuration

2012-01-31 Thread Michal Simek
here. Michal -- Michal Simek, Ing. (M.Eng) w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/ Microblaze U-BOOT custodian ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de

[U-Boot] [PATCH 1/2] fpga: Clean coding style

2013-04-26 Thread Michal Simek
No functional changes. Signed-off-by: Michal Simek michal.si...@xilinx.com --- drivers/fpga/fpga.c | 214 +++- 1 file changed, 96 insertions(+), 118 deletions(-) diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c index 26d2443..0d29894 100644

[U-Boot] [PATCH 2/2] fpga: Fix debug message compilation error

2013-04-26 Thread Michal Simek
CONFIG_FPGA in past was bitfield where bits were use for vendor identification. This fix should be the part of this commit: Improve configuration of FPGA subsystem (sha1: 0133502e39ff89b67c26cb4015e0e7e8d9571184) Signed-off-by: Michal Simek michal.si...@xilinx.com --- drivers/fpga/fpga.c | 2

Re: [U-Boot] [PATCH 1/2] fpga: Clean coding style

2013-04-26 Thread Michal Simek
On 04/26/2013 12:25 PM, Michal Simek wrote: No functional changes. Signed-off-by: Michal Simek michal.si...@xilinx.com --- drivers/fpga/fpga.c | 214 +++- 1 file changed, 96 insertions(+), 118 deletions(-) There are compilation failures

Re: [U-Boot] [PATCH v2 14/15] i2c: zynq: Add support for Xilinx Zynq

2013-04-29 Thread Michal Simek
On 04/29/2013 05:39 AM, Heiko Schocher wrote: Hello Michal, AOn 23.04.2013 12:46, Michal Simek wrote: Support Xilinx Zynq i2c controller. Signed-off-by: Joe Hershberger joe.hershber...@ni.com Signed-off-by: Michal Simek michal.si...@xilinx.com CC: Heiko Schocher h...@denx.de --- Changes

Re: [U-Boot] [RFC PATCH 0/1] GPIO support for Microblaze

2013-04-29 Thread Michal Simek
On 04/27/2013 05:35 PM, Simon Glass wrote: Hi Michal, On Wed, Apr 24, 2013 at 1:30 AM, Michal Simek mon...@monstr.eu wrote: Hi Simon, here is also one small problem if you want to use patman just for one patch then cover letter contains 0/1 but patch itself doesn't contain 1/1. I think

Re: [U-Boot] [RFC PATCH] gpio: Add support for microblaze xilinx GPIO

2013-04-29 Thread Michal Simek
On 04/27/2013 05:45 PM, Simon Glass wrote: Hi Michal, On Wed, Apr 24, 2013 at 1:27 AM, Michal Simek michal.si...@xilinx.com wrote: Microblaze uses gpio which is connected to the system reset. Currently gpio subsystem wasn't used for it. Add gpio driver and change Microblaze reset logic

[U-Boot] Pull request - microblaze

2013-04-30 Thread Michal Simek
://www.denx.de/git/u-boot-microblaze.git microblaze for you to fetch changes up to 0f21f98dd4d6bff72df4eeaca4163779896cb336: watchdog: Add support for Xilinx Microblaze watchdog (2013-04-30 11:22:43 +0200) Michal Simek (4

[U-Boot] Pull request - zynq

2013-04-30 Thread Michal Simek
for Xilinx Zynq (2013-04-30 11:39:28 +0200) David Andrey (3): arm: zynq: U-Boot udelay 1000 FIX net: gem: Pass phy address to init net: gem: Preserve clk on emio interface Michal Simek (11): arm: zynq

Re: [U-Boot] Pull request - microblaze

2013-05-01 Thread Michal Simek
On 04/30/2013 05:44 PM, Tom Rini wrote: On Tue, Apr 30, 2013 at 11:26:44AM +0200, Michal Simek wrote: Hi Tom, please pull these microblaze changes to your tree. 2 of that patches was reviewed by you. Thanks, Michal The following changes since commit

Re: [U-Boot] Pull request - zynq

2013-05-01 Thread Michal Simek
On 04/30/2013 04:50 PM, Tom Rini wrote: On Tue, Apr 30, 2013 at 11:49:33AM +0200, Michal Simek wrote: Hi Tom and Albert, please pull this patchset related to arm zynq to your tree. I haven't got any ACK for gem and platform changes but the whole patchset was reviewed by Tom. Also not all

[U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support

2013-05-01 Thread Michal Simek
comments (fpga) - Do not use CamelCase for XilinxZynq (fpga) - Move to fpga series and extend this driver - New patch in this series Michal Simek (7): fpga: Clean coding style fpga: Fix debug message compilation error cmd: fpga: Clean coding style cmd: fpga: Move fpga_loadbitstream to fpga.c

[U-Boot] [PATCH v2 1/7] fpga: Clean coding style

2013-05-01 Thread Michal Simek
No functional changes. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - Fix compilation warnings drivers/fpga/fpga.c | 216 1 file changed, 98 insertions(+), 118 deletions(-) diff --git a/drivers/fpga/fpga.c b/drivers

[U-Boot] [PATCH v2 2/7] fpga: Fix debug message compilation error

2013-05-01 Thread Michal Simek
CONFIG_FPGA in past was a bitfield where bits were use for vendor identification. This fix should be the part of this commit: Improve configuration of FPGA subsystem (sha1: 0133502e39ff89b67c26cb4015e0e7e8d9571184) Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - Fix

[U-Boot] [PATCH v2 3/7] cmd: fpga: Clean coding style

2013-05-01 Thread Michal Simek
No functional changes. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: None I had to shorten some debug messages and divide them to two parts to pass checkpatch. --- common/cmd_fpga.c | 213 +++--- 1 file changed, 107

[U-Boot] [PATCH v2 7/7] fpga: Check device name against bitstream name

2013-05-01 Thread Michal Simek
Ensure that wrong bitstream won't be loaded to current device. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - New patch in this series drivers/fpga/fpga.c | 20 drivers/fpga/xilinx.c | 2 ++ include/xilinx.h | 1 + include/zynqpl.h

[U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c

2013-05-01 Thread Michal Simek
In bitstream decoding you can directly check device which you want to load and in fpga.c are fpga_validate and fpga_dev_info functions which should be used for it. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: None common/cmd_fpga.c | 94

[U-Boot] [PATCH v2 6/7] fpga: zynq: Add support for loading bitstream

2013-05-01 Thread Michal Simek
Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - Fix bugs reported by Tom Rini - Fix checkpatch warnings (fpga) - Fix comments (fpga) - Do not use CamelCase for XilinxZynq (fpga) - Move to fpga series and extend this driver This patch was the part of zynq series but I have

[U-Boot] [PATCH v2 5/7] cmd: fpga: Do not include net.h

2013-05-01 Thread Michal Simek
There is no reason to include net.h header in fpga code. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: None common/cmd_fpga.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index aa14ceb..5e1d037 100644 --- a/common

[U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO

2013-05-01 Thread Michal Simek
-generic.c:38:47: warning: operation on '*1073741824u' may be undefined [-Wsequence-point] Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - Use asm-generic/gpio.h file - Add gpio_set_value() - Check return value from gpio_get_controller GPIO support for Microblaze I want

Re: [U-Boot] [PATCH v2 4/7] cmd: fpga: Move fpga_loadbitstream to fpga.c

2013-05-01 Thread Michal Simek
On 05/01/2013 05:03 PM, Tom Rini wrote: On Wed, May 01, 2013 at 10:59:20AM +0200, Michal Simek wrote: In bitstream decoding you can directly check device which you want to load and in fpga.c are fpga_validate and fpga_dev_info functions which should be used for it. Signed-off-by: Michal

Re: [U-Boot] [PATCH v2 0/7] FPGA cleanup + zynq support

2013-05-01 Thread Michal Simek
On 05/01/2013 05:14 PM, Tom Rini wrote: On Wed, May 01, 2013 at 10:59:16AM +0200, Michal Simek wrote: Fpga code is pretty old and none has tried to clean it up. My attempt is related to new code I want to push to mainline which is add support for checking bitstream and if bitstream is valid

[U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO

2013-05-03 Thread Michal Simek
-generic.c:38:47: warning: operation on '*1073741824u' may be undefined [-Wsequence-point] Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - Use asm-generic/gpio.h file - Add gpio_set_value() - Check return value from gpio_get_controller GPIO support for Microblaze I want

[U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support

2013-05-03 Thread Michal Simek
(fpga) - Do not use CamelCase for XilinxZynq (fpga) - Move to fpga series and extend this driver - New patch in this series Michal Simek (9): fpga: Clean coding style fpga: Fix debug message compilation error cmd: fpga: Clean coding style cmd: fpga: Move fpga_loadbitstream to fpga.c fpga

[U-Boot] [PATCH v3 1/9] fpga: Clean coding style

2013-05-03 Thread Michal Simek
No functional changes. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: None Changes in v2: - Fix compilation warnings drivers/fpga/fpga.c | 216 1 file changed, 98 insertions(+), 118 deletions(-) diff --git a/drivers

[U-Boot] [PATCH v3 2/9] fpga: Fix debug message compilation error

2013-05-03 Thread Michal Simek
CONFIG_FPGA in past was a bitfield where bits were use for vendor identification. This fix should be the part of this commit: Improve configuration of FPGA subsystem (sha1: 0133502e39ff89b67c26cb4015e0e7e8d9571184) Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: None

[U-Boot] [PATCH v3 6/9] cmd: fpga: Do not include net.h

2013-05-03 Thread Michal Simek
There is no reason to include net.h header in fpga code. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: None Changes in v2: None common/cmd_fpga.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index aa14ceb..5e1d037 100644

[U-Boot] [PATCH v3 3/9] cmd: fpga: Clean coding style

2013-05-03 Thread Michal Simek
No functional changes. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: None Changes in v2: None I had to shorten some debug messages and divide them to two parts to pass checkpatch. --- common/cmd_fpga.c | 213 +++--- 1 file

[U-Boot] [PATCH v3 4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c

2013-05-03 Thread Michal Simek
In bitstream decoding you can directly check device which you want to load and in fpga.c are fpga_validate and fpga_dev_info functions which should be used for it. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: - Setup fpga_loadbitstream as weak function Changes in v2

[U-Boot] [PATCH v3 5/9] fpga: Change the first parameter in fpga_loadbitstream

2013-05-03 Thread Michal Simek
All fpga functions use devnum as int. Only fpga_loadbitstream is using it as unsinged long dev. This patch synchronize it. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: - New patch in this series Changes in v2: None drivers/fpga/fpga.c | 2 +- drivers/fpga/xilinx.c

[U-Boot] [PATCH v3 7/9] fpga: zynq: Add support for loading bitstream

2013-05-03 Thread Michal Simek
Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: None Changes in v2: - Fix bugs reported by Tom Rini - Fix checkpatch warnings (fpga) - Fix comments (fpga) - Do not use CamelCase for XilinxZynq (fpga) - Move to fpga series and extend this driver This patch was the part of zynq

[U-Boot] [PATCH v3 8/9] fpga: Check device name against bitstream name

2013-05-03 Thread Michal Simek
Ensure that wrong bitstream won't be loaded to current device. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: - Rebase because of change in previous patch - fpga_validate should be global function - fix one printf function - change parameter name according to previous

[U-Boot] [PATCH v3 9/9] fpga: Remove all CONFIG_SYS_* fpga related options

2013-05-03 Thread Michal Simek
All these macros are completely unused by any code. CONFIG_FPGA is not a bitfield anymore. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v3: - New patch in this series Changes in v2: None include/altera.h | 17 - include/configs/M54455EVB.h

[U-Boot] [PATCH 1/2] microblaze: bootm: Fix coding style issues

2013-05-03 Thread Michal Simek
Prepare place for new patch. Signed-off-by: Michal Simek michal.si...@xilinx.com --- arch/microblaze/lib/bootm.c | 20 +++- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 66d21f4..b992a4d 100644

[U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd

2013-05-03 Thread Michal Simek
fdt_initrd add additional information to DTB about initrd addresses which are later used by kernel. Signed-off-by: Michal Simek michal.si...@xilinx.com --- arch/microblaze/lib/bootm.c | 5 + 1 file changed, 5 insertions(+) diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib

[U-Boot] Pull request - fpga

2013-05-06 Thread Michal Simek
to b03b25caea1ff3a501161f5bc1ad5e5b5b124e0c: fpga: Remove all CONFIG_SYS_* fpga related options (2013-05-06 10:41:30 +0200) Michal Simek (9): fpga: Clean coding style fpga: Fix debug message compilation error cmd: fpga: Clean coding style

Re: [U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd

2013-05-06 Thread Michal Simek
On 05/03/2013 09:26 AM, Michal Simek wrote: fdt_initrd add additional information to DTB about initrd addresses which are later used by kernel. Signed-off-by: Michal Simek michal.si...@xilinx.com --- arch/microblaze/lib/bootm.c | 5 + 1 file changed, 5 insertions(+) diff --git

[U-Boot] [PATCH v2 1/2] microblaze: bootm: Fix coding style issues

2013-05-06 Thread Michal Simek
Prepare place for new patch. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: None arch/microblaze/lib/bootm.c | 20 +++- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 66d21f4

[U-Boot] [PATCH v2 2/2] microblaze: bootm: Add support for loading initrd

2013-05-06 Thread Michal Simek
fdt_initrd add additional information to DTB about initrd addresses which are later used by kernel. Signed-off-by: Michal Simek michal.si...@xilinx.com --- Changes in v2: - Check return value from fdt_initrd arch/microblaze/lib/bootm.c | 8 1 file changed, 8 insertions(+) diff --git

[U-Boot] [RFC PATCH] patman: Do not hardcode python path

2013-05-06 Thread Michal Simek
Patman requires python 2.7.4 to run but it doesn't need to be placed in /usr/bin/python. Use env to ensure that the interpreter used is the first one on environment's $PATH on system with several versions of Python installed. Signed-off-by: Michal Simek michal.si...@xilinx.com --- tools/patman

[U-Boot] nand onfi 8bit/16bit bus support

2013-05-06 Thread Michal Simek
I will try to create patch to support this. I just want to be sure that I am not doing something what it is wrong for other platforms. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http

[U-Boot] Pull request - microblaze

2013-05-09 Thread Michal Simek
) Michal Simek (2): microblaze: bootm: Fix coding style issues microblaze: bootm: Add support for loading initrd arch/microblaze/lib/bootm.c | 28 +++- 1 file changed, 19 insertions(+), 9 deletions(-) -- Michal Simek, Ing. (M.Eng), OpenPGP - KeyID

Re: [U-Boot] Pull request - microblaze

2013-05-09 Thread Michal Simek
) Michal Simek (3): microblaze: bootm: Fix coding style issues microblaze: bootm: Add support for loading initrd gpio: Add support for microblaze xilinx GPIO arch/microblaze/include/asm/gpio.h | 40 + arch/microblaze/lib/bootm.c

[U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables

2013-05-09 Thread Michal Simek
Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them. Signed-off-by: Edgar E. Iglesias edgar.igles...@xilinx.com Signed-off-by: Michal Simek

Re: [U-Boot] nand onfi 8bit/16bit bus support

2013-05-09 Thread Michal Simek
On 05/09/2013 11:37 PM, Scott Wood wrote: On 05/06/2013 11:53:52 AM, Michal Simek wrote: Hi guys, Zynq supports 8 and 16bit ONFI nand flashes. We can count number of connected pins and from that we know if 8bit or 16bit nand flash is used. I have looked at the code and contains ONFI

Re: [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables

2013-05-13 Thread Michal Simek
On 05/10/2013 09:07 PM, Albert ARIBAUD wrote: Hi Michal, On Thu, 9 May 2013 11:35:33 +0200, Michal Simek michal.si...@xilinx.com wrote: Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less

Re: [U-Boot] [RFC PATCH] arm: lds: Remove libgcc eabi exception handling tables

2013-06-03 Thread Michal Simek
Hi Albert, On 05/14/2013 05:44 PM, Albert ARIBAUD wrote: Hi Michal, On Mon, 13 May 2013 09:45:12 +0200, Michal Simek mon...@monstr.eu wrote: On 05/10/2013 09:07 PM, Albert ARIBAUD wrote: Hi Michal, On Thu, 9 May 2013 11:35:33 +0200, Michal Simek michal.si...@xilinx.com wrote

Re: [U-Boot] [PATCH v2 5/8] sf: winbond: Update the names for W25Q 0x40XX ID's flash parts

2013-06-05 Thread Michal Simek
representation on name filed = W25Q80BL/W25Q80BV Just because of longer names which go probably to rodata section. It is not a problem for me at all. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP - KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze

[U-Boot] Pull request - sf tree

2013-02-04 Thread Michal Simek
support for N25Q32A sf: stmicro: Add support for N25Q256A drivers/mtd/spi/spansion.c |2 +- drivers/mtd/spi/stmicro.c | 30 ++ drivers/mtd/spi/winbond.c |5 + 3 files changed, 36 insertions(+), 1 deletions(-) -- Michal Simek, Ing. (M.Eng) w

[U-Boot] Pull request - microblaze

2013-02-04 Thread Michal Simek
: Perform software reset during slave setup Michal Simek (5): common: cmd_bdinfo: Fix bdinfo to show all MACs for Microblaze and ARM board: xilinx: Remove unused ancient i2c driver board: xilinx: Remove common folder common: cmd_bdinfo: Fix compilation warning for microblaze

[U-Boot] [PATCH 1/3] xilinx: zynq: Enable DCC and create new zynq_dcc board

2013-02-04 Thread Michal Simek
Enable DCC driver for arm zynq platform to be compiled. Signed-off-by: Michal Simek michal.si...@xilinx.com --- boards.cfg |1 + include/configs/zynq.h |5 + 2 files changed, 6 insertions(+), 0 deletions(-) diff --git a/boards.cfg b/boards.cfg index 98f7a14..1d30a18

[U-Boot] [PATCH 2/3] arm: zynq: Add SLCR support with system reset

2013-02-04 Thread Michal Simek
The patch provides slcr base address initialization support and a support to reset the cpu through slcr driver, hence removed the reset_cpu() from board.c. Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com Signed-off-by: Michal Simek michal.si...@xilinx.com --- arch/arm/cpu/armv7

[U-Boot] [PATCH 3/3] arm: zynq: Add lowlevel initialization to C

2013-02-04 Thread Michal Simek
Do lowlevel initialization directly in C. Zynq do not require to do it in asm. Signed-off-by: Michal Simek michal.si...@xilinx.com --- arch/arm/cpu/armv7/zynq/cpu.c | 26 +++- arch/arm/include/asm/arch-zynq/hardware.h | 46 - 2 files

Re: [U-Boot] Pull request - microblaze

2013-02-04 Thread Michal Simek
2013/2/4 Tom Rini tr...@ti.com: On Mon, Feb 04, 2013 at 12:26:08PM +0100, Michal Simek wrote: Hi Tom, please pull all these changes to your tree. The major change is remove really ancient i2c driver + helper files for this driver. Thanks, Michal The following changes since commit

Re: [U-Boot] [PATCH] sf: spansion: Correct the first byte of idcode1 for S25FL256S part

2013-02-04 Thread Michal Simek
Hi, 2013/2/4 Marek Vasut ma...@denx.de: Dear Michal Simek, was this ever applied? I have sent pull request to Tom and Mike. All patches around cf are here. http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/mainline/sf Interesting that Tom applied this patch

[U-Boot] Pull request for ARM zynq

2013-02-07 Thread Michal Simek
The following changes since commit d62ef5619c9249772247d6af3b8e65207ae0c871: Jagannadha Sutradharudu Teki (1): sf: stmicro: Add support for N25Q256A are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git mainline/arm Michal Simek (3): xilinx: zynq

Re: [U-Boot] Pull request for ARM zynq

2013-02-11 Thread Michal Simek
Hi Albert and Tom, can you please look at my pull request? Thanks, Michal 2012/9/13 Michal Simek mon...@monstr.eu: Hi Albert, CC: Joe and Tom a month ago I have sent 4 Xilinx ARM zynq patches to mailing list (v2) (reminder yesterday) and I haven't got any reaction from anybody. The first

Re: [U-Boot] [PATCH 00/12] cmd_sf: Add support for read and write instructions

2013-03-08 Thread Michal Simek
option based on what the controller and chip connected supports. I guess your idea is to dynamically perform the fastest read/write command based on fastest command supported by controller and chip. I don't know how to support this. Dang, OK. Any update on this? Thanks, Michal -- Michal

[U-Boot] [PATCH] sf: spansion: Add support for S25FL256S

2012-08-14 Thread Michal Simek
Add support for Spansion S25FL256S SPI flash. Signed-off-by: Michal Simek mon...@monstr.eu --- drivers/mtd/spi/spansion.c |7 +++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index 9a114ac..32b76e0 100644

[U-Boot] [PATCH] arm: Remove additional config flags

2012-08-14 Thread Michal Simek
These options are just duplicated from arch/arm/cpu/armv7/config.mk Signed-off-by: Michal Simek mon...@monstr.eu --- arch/arm/cpu/armv7/highbank/config.mk|1 - arch/arm/cpu/armv7/omap-common/config.mk |9 - 2 files changed, 0 insertions(+), 10 deletions(-) delete mode 100644

[U-Boot] Xilinx Zynq platform

2012-08-14 Thread Michal Simek
Hi, I am sending basic support for new Xilinx Zynq platform. It is new ARM cortex a9 cpu with programmable logic. For more information look at www.xilinx.com/zynq. In future we are going to extend this platform for i2c, spi, mmc, fpga, nand, nor support, and maybe more. These drivers will be

[U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP

2012-08-14 Thread Michal Simek
Device driver for Zynq Gem IP. Signed-off-by: Michal Simek mon...@monstr.eu CC: Joe Hershberger joe.hershber...@gmail.com --- drivers/net/Makefile |1 + drivers/net/xilinx_gem.c | 514 ++ include/netdev.h |1 + 3 files changed, 516

[U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform

2012-08-14 Thread Michal Simek
Add timer driver. Signed-off-by: Michal Simek mon...@monstr.eu --- arch/arm/cpu/armv7/zynq/Makefile | 48 arch/arm/cpu/armv7/zynq/timer.c | 151 ++ 2 files changed, 199 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/zynq

[U-Boot] [PATCH 4/4] xilinx: Add new Zynq board

2012-08-14 Thread Michal Simek
Add support for Xilinx Zynq board. Signed-off-by: Michal Simek mon...@monstr.eu --- board/xilinx/zynq/Makefile| 57 + board/xilinx/zynq/board.c | 64 + board/xilinx/zynq/lowlevel_init.S | 27

[U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver

2012-08-14 Thread Michal Simek
The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek mon...@monstr.eu --- drivers/serial/Makefile |1 + drivers/serial/serial_xpssuart.c | 218 ++ 2 files changed, 219 insertions(+), 0 deletions(-) create mode 100644 drivers

[U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board

2012-08-14 Thread Michal Simek
Add support for Xilinx Zynq board. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Forget to also add config file --- board/xilinx/zynq/Makefile| 57 + board/xilinx/zynq/board.c | 64 +++ board/xilinx/zynq/lowlevel_init.S | 27

Re: [U-Boot] [PATCH 4/4] xilinx: Add new Zynq board

2012-08-14 Thread Michal Simek
On 08/14/2012 01:42 PM, Michal Simek wrote: Add support for Xilinx Zynq board. Signed-off-by: Michal Simek mon...@monstr.eu --- board/xilinx/zynq/Makefile| 57 + board/xilinx/zynq/board.c | 64 + board

Re: [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform

2012-08-14 Thread Michal Simek
On 08/14/2012 05:36 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 6:42 AM, Michal Simek mon...@monstr.eu wrote: Add timer driver. Signed-off-by: Michal Simek mon...@monstr.eu --- arch/arm/cpu/armv7/zynq/Makefile | 48 arch/arm/cpu/armv7/zynq/timer.c | 151

Re: [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver

2012-08-14 Thread Michal Simek
On 08/14/2012 04:09 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 6:42 AM, Michal Simek mon...@monstr.eu wrote: The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek mon...@monstr.eu --- drivers/serial/Makefile |1 + drivers/serial

Re: [U-Boot] [PATCH 2/4] net: Add driver for Zynq Gem IP

2012-08-14 Thread Michal Simek
Hi Joe, On 08/14/2012 04:59 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 6:42 AM, Michal Simek mon...@monstr.eu wrote: Device driver for Zynq Gem IP. Signed-off-by: Michal Simek mon...@monstr.eu CC: Joe Hershberger joe.hershber...@gmail.com --- drivers/net/Makefile

Re: [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform

2012-08-14 Thread Michal Simek
On 08/14/2012 06:41 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 11:28 AM, Michal Simek mon...@monstr.eu wrote: On 08/14/2012 05:36 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 6:42 AM, Michal Simek mon...@monstr.eu wrote: Add timer driver. Signed-off

Re: [U-Boot] [PATCH 1/4] serial: Add Dragonfire serial driver

2012-08-14 Thread Michal Simek
On 08/14/2012 06:45 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 11:38 AM, Michal Simek mon...@monstr.eu wrote: On 08/14/2012 04:09 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 6:42 AM, Michal Simek mon...@monstr.eu wrote: The driver is used on Xilinx

Re: [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform

2012-08-14 Thread Michal Simek
On 08/14/2012 07:15 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 12:11 PM, Michal Simek mon...@monstr.eu wrote: On 08/14/2012 06:41 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 11:28 AM, Michal Simek mon...@monstr.eu wrote: On 08/14/2012 05:36 PM, Joe

Re: [U-Boot] [PATCH 3/4] arm: Support new Xilinx Zynq platform

2012-08-14 Thread Michal Simek
On 08/14/2012 08:19 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 12:39 PM, Michal Simek mon...@monstr.eu wrote: On 08/14/2012 07:15 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 12:11 PM, Michal Simek mon...@monstr.eu wrote: On 08/14/2012 06:41 PM, Joe

Re: [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board

2012-08-15 Thread Michal Simek
Hi Joe, sorry missed this one. On 08/14/2012 05:48 PM, Joe Hershberger wrote: Hi Michal, On Tue, Aug 14, 2012 at 7:15 AM, Michal Simek mon...@monstr.eu wrote: Add support for Xilinx Zynq board. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Forget to also add config file --- board

Re: [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board

2012-08-16 Thread Michal Simek
Hi Joe, On 08/15/2012 07:31 PM, Joe Hershberger wrote: Hi Michal, On Wed, Aug 15, 2012 at 3:49 AM, Michal Simek mon...@monstr.eu wrote: Hi Joe, sorry missed this one. On 08/14/2012 05:48 PM, Joe Hershberger wrote: Are you thinking that this will be the one and only Zynq board? Perhaps

[U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver

2012-08-16 Thread Michal Simek
The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Use Zynq name instead of Dragonfire and XPSS/XDFUART Rename driver name Remove driver description --- drivers/serial/Makefile |1 + drivers/serial/serial_zynq.c | 200

[U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP

2012-08-16 Thread Michal Simek
Device driver for Zynq Gem IP. Signed-off-by: Michal Simek mon...@monstr.eu CC: Joe Hershberger joe.hershber...@gmail.com --- v2: Remove phylib protection Rename driver file name xilinx_gem to zynq_gem Rename XEMACPSS to ZYNQ_GEM Rename gemac_priv to zynq_gem_priv Rename gem_regs

[U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board

2012-08-16 Thread Michal Simek
Add support for Xilinx Zynq board. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Forget to also add config file v3: Change name for serial driver Remove lowlevel_init from board folder Remove XPSS part from timer baseaddr Change name for Zynq gem driver Clean coding style

[U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform

2012-08-16 Thread Michal Simek
Add timer driver. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Move lowlevel_init.S from board to cpu folder Remove XPSS prefix Rename XSCUTIMER - SCUTIMER Keep timer in zynq folder till ARM custodian comments it. --- arch/arm/cpu/armv7/zynq/Makefile| 52

Re: [U-Boot] [PATCH 4/4 v2] xilinx: Add new Zynq board

2012-08-17 Thread Michal Simek
On 08/16/2012 07:27 PM, Joe Hershberger wrote: Hi Michal, On Thu, Aug 16, 2012 at 1:12 AM, Michal Simek mon...@monstr.eu wrote: Hi Joe, On 08/15/2012 07:31 PM, Joe Hershberger wrote: Hi Michal, I believe this is a fundamental misunderstanding of the Zynq architecture. I don't think

[U-Boot] Pull request - microblaze

2012-09-12 Thread Michal Simek
://www.denx.de/git/u-boot-microblaze.git master Michal Simek (10): block: systemace: Simplify base and width initialization serial: Support serial multi for Microblaze serial: uartlite: Init all uartlites for serial multi microblaze: Add support for device tree driven board

Re: [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP

2012-09-12 Thread Michal Simek
On 08/16/2012 08:30 AM, Michal Simek wrote: Device driver for Zynq Gem IP. Signed-off-by: Michal Simek mon...@monstr.eu CC: Joe Hershberger joe.hershber...@gmail.com --- v2: Remove phylib protection Rename driver file name xilinx_gem to zynq_gem Rename XEMACPSS to ZYNQ_GEM

Re: [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver

2012-09-12 Thread Michal Simek
On 08/16/2012 08:30 AM, Michal Simek wrote: The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Use Zynq name instead of Dragonfire and XPSS/XDFUART Rename driver name Remove driver description --- drivers/serial/Makefile |1

Re: [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform

2012-09-12 Thread Michal Simek
On 08/16/2012 08:30 AM, Michal Simek wrote: Add timer driver. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Move lowlevel_init.S from board to cpu folder Remove XPSS prefix Rename XSCUTIMER - SCUTIMER Keep timer in zynq folder till ARM custodian comments it. --- arch/arm

Re: [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board

2012-09-12 Thread Michal Simek
On 08/16/2012 08:30 AM, Michal Simek wrote: Add support for Xilinx Zynq board. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Forget to also add config file v3: Change name for serial driver Remove lowlevel_init from board folder Remove XPSS part from timer baseaddr

[U-Boot] Pull request for ARM zynq

2012-09-13 Thread Michal Simek
-avr32 are available in the git repository at: git://www.denx.de/git/u-boot-microblaze.git master-zynq Michal Simek (4): serial: Add Zynq serial driver net: Add driver for Zynq Gem IP arm: Support new Xilinx Zynq platform xilinx: Add new Zynq board arch/arm/cpu/armv7/zynq

Re: [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform

2012-09-13 Thread Michal Simek
On 09/13/2012 11:32 AM, Marek Vasut wrote: Dear Michal Simek, On 08/16/2012 08:30 AM, Michal Simek wrote: Add timer driver. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Move lowlevel_init.S from board to cpu folder Remove XPSS prefix Rename XSCUTIMER - SCUTIMER Keep

Re: [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver

2012-09-13 Thread Michal Simek
On 09/13/2012 11:21 AM, Marek Vasut wrote: Dear Michal Simek, The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek mon...@monstr.eu --- v2: Use Zynq name instead of Dragonfire and XPSS/XDFUART Rename driver name Remove driver description --- drivers/serial

Re: [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform

2012-09-13 Thread Michal Simek
On 09/13/2012 11:31 AM, Marek Vasut wrote: Dear Michal Simek, [...] +#include config.h +#include linux/linkage.h + +ENTRY(lowlevel_init) +mov pc, lr +ENDPROC(lowlevel_init) inline void lowlevel_init(void) {} works as well and you don't need the assembly file. :-) yes

Re: [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board

2012-09-13 Thread Michal Simek
On 09/13/2012 11:35 AM, Marek Vasut wrote: Dear Michal Simek, [...] +int board_init(void) +{ + icache_enable(); Uh oh ... isn't this on by default when CONFIG_ICACHE_OFF isn't present? Will check this one. + return 0; +} + +int board_late_init(void) +{ + return 0

  1   2   3   4   5   6   7   8   9   10   >