Hi Heiko,
On May 24, 2013, at 7:39 PM, Heiko Schocher wrote:
Hello,
just digging in DFU support in U-Boot for an upcoming board support
based on an AM335x. This board support uses for example a rootfs in
an UBI Volume on a NAND flash, and this should be updated with dfu ...
How To do
Hi Guys,
On May 27, 2013, at 10:28 AM, Heiko Schocher wrote:
Hello Lukasz,
Am 27.05.2013 09:02, schrieb Lukasz Majewski:
Hi Heiko,
Hello Tom,
Am 24.05.2013 19:12, schrieb Tom Rini:
On Fri, May 24, 2013 at 07:42:01PM +0300, Pantelis Antoniou wrote:
Hi Heiko,
On May 24, 2013, at 7
Hi
On May 27, 2013, at 7:25 PM, Wolfgang Denk wrote:
Dear Heiko Schocher,
In message 51a30f34.7030...@denx.de you wrote:
But how to handle a raw nand partition and a ubi partition on one
nand?
If ubi is a new dfu interface, somebody must start dfu on u-boot
with dfu nand .. or dfu
Hi Tom,
On May 28, 2013, at 6:01 PM, Tom Rini wrote:
On Tue, May 28, 2013 at 07:50:46AM +0200, Wolfgang Denk wrote:
Dear Tom,
In message 20130527233735.GZ17119@bill-the-cat you wrote:
Where exactly is this 8 MB limit coming into play?
In buffering the data. We cannot write a chunk of
Hi Benoît
On May 28, 2013, at 7:31 PM, Benoît Thébaudeau wrote:
Dear Pantelis Antoniou,
On Tuesday, May 28, 2013 5:05:12 PM, Pantelis Antoniou wrote:
Hi Tom,
On May 28, 2013, at 6:01 PM, Tom Rini wrote:
On Tue, May 28, 2013 at 07:50:46AM +0200, Wolfgang Denk wrote:
Dear Tom
Hi
On May 28, 2013, at 7:43 PM, Benoît Thébaudeau wrote:
Hi Pantelis,
On Tuesday, May 28, 2013 6:43:06 PM, Pantelis Antoniou wrote:
Hi Benoît
On May 28, 2013, at 7:31 PM, Benoît Thébaudeau wrote:
Dear Pantelis Antoniou,
On Tuesday, May 28, 2013 5:05:12 PM, Pantelis Antoniou wrote
(in bytes) of this buffer
configurable.
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Cc: Tom Rini tr...@ti.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Kyungmin Park kyungmin.p...@samsung.com
Cc: Marek Vasut ma...@denx.de
---
README
Heiko,
On Jun 4, 2013, at 1:31 PM, Heiko Schocher wrote:
Hello Pantelis,
Am 04.06.2013 12:08, schrieb Pantelis Antoniou:
Hi Heiko,
Just thinking out loud here. Can we have an extra option that
allocates the buffer dynamically based on an env variable?
Hmm.. also a possibility... I
Hi Lukasz,
On Mar 6, 2013, at 9:42 AM, Lukasz Majewski wrote:
Dear All,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 03/05/2013 06:24 PM, Marek Vasut wrote:
Dear Lukasz Majewski,
Hi Marek,
Dear Lukasz Majewski,
This commit fixes problems with some non-standard requests
Heiko,
I don't think the gadget is initialized before you issue
a dfu call.
So that makes sense.
Let's wait until Tom wakes up and have an authoritative answer.
Regards
-- Pantelis
On Jun 25, 2013, at 11:08 AM, Heiko Schocher wrote:
Hello,
using dfu-util -l shows different output
Update git-mailrc with my nick and replace afleming as mmc custodian.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
doc/git-mailrc | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/doc/git-mailrc b/doc/git-mailrc
index e3a47c4..03fc482 100644
--- a/doc
Hi Jaehoon,
On Aug 13, 2013, at 11:52 AM, Jaehoon Chung wrote:
Dear Pantelis,
Welcome to take care of u-boot-mmc.
Thanks
Could you merge this patch?
Please hold on a bit; we're still in the process of passing over the (mmc)
torch.
That patch looks good.
Best Regards,
Jaehoon
-by: Pantelis Antoniou pa...@antoniou-consulting.com
Thanks
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Cc: Alexey Brodkin abrod...@synopsys.com
Cc: Jaehoon Chung jh80.ch...@samsung.com
Cc: Andy Fleming aflem...@gmail.com
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
Thanks
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de
Hi Oleksandr,
On Aug 6, 2013, at 1:50 PM, Oleksandr Tyshchenko wrote:
Do not call a memset for unused variable backup every time.
Remove unused variable from function.
Signed-off-by: Oleksandr Tyshchenko oleksandr.tyshche...@ti.com
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
-by: Oleksandr Tyshchenko oleksandr.tyshche...@ti.com
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
Thanks
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Taras,
What are you doing that makes you call any of the mmc_devices list functions
before calling mmc_initialize()
Which board has this problem; this looks like a board problem to me.
Regards
-- Pantelis
On Aug 6, 2013, at 7:41 PM, Taras Kondratiuk wrote:
Currently mmc_device list is
Hi Paul
On Sep 4, 2013, at 6:12 PM, Paul Burton wrote:
If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio
*printf functions are unavailable calling them will cause a link
failure.
Signed-off-by: Paul Burton paul.bur...@imgtec.com
---
drivers/mmc/mmc.c | 36
Hi Paul
On Sep 6, 2013, at 3:51 PM, Paul Burton wrote:
On 06/09/13 13:48, Pantelis Antoniou wrote:
Hi Paul
On Sep 4, 2013, at 6:12 PM, Paul Burton wrote:
If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio
*printf functions are unavailable calling them will cause a link
Hi Paul,
On Sep 4, 2013, at 6:14 PM, Paul Burton wrote:
For SPL builds this is just dead code since we'll only need to read.
Eliminating it results in a significant size reduction for the SPL
binary.
Signed-off-by: Paul Burton paul.bur...@imgtec.com
---
I understand what you're trying to
.
Tested on Goni and Trats.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers/mmc/sdhci.c | 14 --
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index
.
Signed-off-by: Paul Burton paul.bur...@imgtec.com
---
Changes in v2:
- Move the mmc_bwrite mmc_berase functions to a new mmc_write.c
file which is only compiled for non-SPL builds, as per a request
from Pantelis Antoniou. This requires that a few formerly static
functions in mmc.c
Hi there,
On Sep 6, 2013, at 6:23 PM, Przemyslaw Marczak wrote:
Hello Pantelis,
On 09/06/2013 03:24 PM, Pantelis Antoniou wrote:
Hi there,
Can we have a config option for these two values instead of magic numbers?
With the defaults being set at 10 200 ms.
Regards
-- Pantelis
builds, as per a request
from Pantelis Antoniou. This requires that a few formerly static
functions in mmc.c be accessible to the new file, so they are
declared in a new mmc_private.h header along with the write
erase functions. For what it's worth I prefered v1, but hey ho.
---
drivers/mmc
after data transfer.
For other transfers it stays unchanged. Default values are
now defined with if defined directive so it can be redefined
at board config if needed.
Tested on Goni and Trats.
Signed-off-by: Przemyslaw Marczak p.marc...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou
Hi Rajesh,
I guess we wait for an updated patch here?
Regards
-- Pantelis
On Sep 11, 2013, at 4:25 PM, Rajeshwari Birje wrote:
Hi Jaehoon Chung,
Thank you for comments,
On Wed, Sep 11, 2013 at 11:31 AM, Jaehoon Chung jh80.ch...@samsung.com
wrote:
On 09/11/2013 02:28 PM,
Hi Tom,
The following changes since commit 46ef4faed18196472eb95216b2f74c1397ecf024:
Prepare v2013.10-rc3 (2013-09-16 20:08:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to b31c9beb9bdde1714b1131cf0e64b8b68350e824:
Hi Rajesh, Simon,
On Sep 19, 2013, at 9:12 AM, Simon Glass wrote:
Hi Rajeshwari,
On Wed, Sep 11, 2013 at 4:01 AM, Rajeshwari S Shinde
rajeshwar...@samsung.com wrote:
SMDK5420 has a new Security Management Unit added
for dwmmc driver, hence, configuring the control
registers to support
Hi Tom,
The following changes since commit 46ef4faed18196472eb95216b2f74c1397ecf024:
Prepare v2013.10-rc3 (2013-09-16 20:08:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to 2c011847c129491084a19c753a039a3441b7dce4:
+#define ARMD1_SD1_BASE 0xD428
+#define ARMD1_SD2_BASE 0xD4281000
#define ARMD1_APMU_BASE 0xD4282800
#define ARMD1_CPU_BASE0xD4282C00
--
1.8.3.rc3
Looks fine.
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
CONFIG_DOS_PARTITION
+#define CONFIG_MMC_SDMA
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
--
1.8.3.rc3
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
Hi there,
On Oct 1, 2013, at 3:16 PM, Przemyslaw Marczak wrote:
Old command timeout value was too small and it caused I/O errors which
led to uncompleted read/write/erase operations and filesystem errors.
Timeout adaptation fixes this issue.
Changes in sdhci_send_command() function:
-
Hi Przemyslaw,
On Oct 1, 2013, at 7:59 PM, Przemyslaw Marczak wrote:
Hello Pantelis,
Thank you for reply
On 10/01/2013 05:50 PM, Pantelis Antoniou wrote:
while (sdhci_readl(host, SDHCI_PRESENT_STATE) mask) {
-if (timeout == 0) {
+if (time == cmd_timeout
When both CONFIG_USB_GADGET CONFIG_USB_ETHER are defined
the makefile links objects twice.
This patch uses a Makefile specific idiom of
'if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER)'
to handle the case.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers
Hi Marek,
On Dec 1, 2012, at 7:30 AM, Marek Vasut wrote:
Dear Pantelis Antoniou,
When both CONFIG_USB_GADGET CONFIG_USB_ETHER are defined
the makefile links objects twice.
The cleanest way to fix is to use a new define, CONFIG_USB_UTIL
which must be defined when either CONFIG_USB_ETHER
.
nand_extend_skip_bad() returns the offset where the next access
should occur.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers/mtd/nand/nand_util.c | 50
include/nand.h | 2 ++
2 files changed, 52 insertions(+)
diff
Introduce on-the fly DFU NAND support.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers/dfu/Makefile | 1 +
drivers/dfu/dfu.c | 7 ++
drivers/dfu/dfu_nand.c | 194 +
include/dfu.h | 23 ++
4 files
no idea why it works at your side.
At our side it just didn't work at all without the patches.
If I had to guess maybe your gadget h/w takes care of replying
properly for the DFU case.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers/usb/gadget/composite.c | 27
Hi Scott,
On Dec 11, 2012, at 3:09 AM, Scott Wood wrote:
On 12/10/2012 09:24:32 AM, Pantelis Antoniou wrote:
Introduce on-the fly DFU NAND support.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers/dfu/Makefile | 1 +
drivers/dfu/dfu.c | 7 ++
drivers/dfu
Hi Scott,
On Dec 11, 2012, at 12:53 AM, Scott Wood wrote:
On 12/10/2012 09:24:24 AM, Pantelis Antoniou wrote:
When accessing nand any bad blocks encountered are skipped, with no
indication about the amount of bad blocks encountered.
While this is normally fine, when you have to write a large
Hi Lukasz,
I bet transmission is performed, but with the default settings of dfu.
The DFU function descriptor is completely ignored.
An easy way to verify it is to check if the DFU version of the device
is the same one as the one stored in the descriptor. Same with the transmission
block size.
Hi Scott,
On Dec 11, 2012, at 7:13 PM, Scott Wood wrote:
On 12/11/2012 03:40:53 AM, Pantelis Antoniou wrote:
Hi Scott,
On Dec 11, 2012, at 12:53 AM, Scott Wood wrote:
+/**
+ * nand_extent_skip_bad:
+ *
+ * Find the extent of a chunk, return the offset where it ends
+ * Blocks
Lukasz,
I'll sent the dump in a couple of hours.
Been busy with other work items...
Regards
-- Pantelis
On Dec 17, 2012, at 1:00 PM, Lukasz Majewski wrote:
Hi Marek,
Pantelis Antoniou (9):
g_dnl: Issue connect/disconnect as appropriate
g_dnl: Properly terminate string list
Marek,
Pantelis Antoniou (9):
g_dnl: Issue connect/disconnect as appropriate
g_dnl: Properly terminate string list.
dfu: Only perform DFU board_usb_init() for TRATS
dfu: Fix crash when wrong number of arguments given
dfu: Send correct DFU response from composite_setup
that the patchset fixes
correctly.
Regards
-- Pantelis
On Dec 17, 2012, at 1:00 PM, Lukasz Majewski wrote:
Hi Marek,
Pantelis Antoniou (9):
g_dnl: Issue connect/disconnect as appropriate
g_dnl: Properly terminate string list.
dfu: Only perform DFU board_usb_init
Hi Lukasz,
Mystery solved then :)
On Dec 18, 2012, at 1:25 PM, Lukasz Majewski wrote:
Hi Pantelis,
Can you paste the log of your dfu-util session? Are you supplying a
transfer size for example?
Regards
u-boot-denx/master (denx.de) repository
SHA1:
Hi Kasim,
On Jan 3, 2013, at 10:30 AM, kasim ling wrote:
Hi, Pantelis,
A little confusion about FAT fs write supporting,
On Sat, Dec 1, 2012 at 12:51 AM, Pantelis Antoniou
pa...@antoniou-consulting.com wrote:
We didn't support upload/download larger than available memory
(QIXIS_BASE + QIXIS_BRDCFG5) QIXIS_MUX_SDHC) || \
+ IS_SVR_REV(get_svr(), 1, 0))
#endif
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
--
1.8.4.1
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot
(), 1, 0))
+#define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
+ (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) QIXIS_MUX_SDHC_WIDTH8))
#endif
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
--
1.8.4.1
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
))
+ *env_addr = ESDHC_DEFAULT_ENVADDR;
+ else
+ *env_addr = tmp;
+
+ free(tmp_buf);
+
+ return 0;
+#endif
+
*env_addr = code_offset + code_len;
free(tmp_buf);
--
1.8.4.1
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
Hi York,
On Jan 22, 2014, at 12:01 AM, York Sun wrote:
Pantelis,
On 01/09/2014 09:52 PM, Haijun Zhang wrote:
Card detection pin is ineffective on T4240QDS Rev1.0.
There are two cards can be connected to board.
1. eMMC card is built-in board, can not be removed. so
For eMMC card it is
and doesn't enable those modes, we don't actually need to address
any of these HW differences in the code yet, hence the simple nature of
this patch.
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Signed-off-by: Stephen Warren swar...@nvidia.com
---
v2: New patch.
This patch
Sorry, just had a baby and things are a bit busy.
It's not fallen into the bit-bucket if that's what you're worried about.
Regards
-- Pantelis
On Jan 29, 2014, at 11:14 PM, York Sun wrote:
On 11/01/2013 12:47 AM, Zhang Haijun wrote:
:-)
Thanks.
于 2013/11/1 15:45, Pantelis Antoniou 写道
(struct mmc *mmc)
mmc-ocr = cmd.response[0];
mmc-high_capacity = ((mmc-ocr OCR_HCS) == OCR_HCS);
- mmc-rca = 0;
+ mmc-rca = 1;
return 0;
}
--
1.8.1.5
Applied, Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
*host);
void (*board_init)(struct dwmci_host *host);
- unsigned int (*get_mmc_clk)(int dev_index);
+ unsigned int (*get_mmc_clk)(struct dwmci_host *host);
};
struct dwmci_idmac {
--
1.7.12.4
Applied, Thanks
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
/related.
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Signed-off-by: Tom Rini tr...@ti.com
---
Changes in v3:
- Rework eMMC boot detect logic for TI platforms, in the eMMC boot case
we rely on non-FAT/RAW values being in bootmode.
---
arch/arm/cpu/armv7/omap-common/boot-common.c
, u8 mode);
/**
* Start device initialization and return immediately; it does not block on
--
1.7.9.5
Applied. Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de
an strncmp to a strcmp, like
the rest of the sub-commands.
Cc: Andy Fleming aflem...@gmail.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Acked-by: Jaehoon Chung jh80.ch...@samsung.com
Signed-off-by: Tom Rini tr...@ti.com
---
common/cmd_mmc.c | 30
register value\n
);
--
1.7.9.5
Applied. Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
+#define CONFIG_SUPPORT_EMMC_BOOT
+
/* USB xHCI HOST */
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
--
1.7.9.5
Applied. Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http
CONFIG_SUPPORT_EMMC_BOOT
/* Required support for the TCA642X GPIO we have on the uEVM */
#define CONFIG_TCA642X
--
1.7.9.5
Applied. Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http
the BOOT_BUS_WIDTH field of EXT_CSD */
--
1.7.9.5
Applied. Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Hector,
On Jan 23, 2014, at 2:39 PM, Hector Palacios wrote:
This complements commit 9404a5fc7cb58 env_mmc: allow environment to be
in an eMMC partition by allowing boards to accommodate the partition
to use for the environment in different scenarios (similarly to what is
done with the mmc
;
+ }
+
+ mmc = find_mmc_device(dev);
if (!mmc) {
printf(no mmc device at slot %x\n, dev);
return 1;
--
1.7.9.5
Applied. Thanks.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U
Hi Tom,
The following changes since commit dbf3de2dd26cae37d16b00b348828c883b658cc5:
include/usb/s3c_udc.h: Add asm/sizes.h (2014-02-06 14:26:05 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to
Hi Lukasz,
Looks fine to me. Let me run a few tests over the weekend and I'll apply.
Thanks
-- Pantelis
On Feb 21, 2014, at 9:23 AM, Lukasz Majewski wrote:
For some time we have been using the run_command() with properly crafted
string. Such approach turned to be unreliable and error
-by: Pantelis Antoniou pa...@antoniou-consulting.com
---
drivers/mmc/arm_pl180_mmci.c | 12 +
drivers/mmc/bfin_sdh.c | 11
drivers/mmc/davinci_mmc.c| 13 -
drivers/mmc/dw_mmc.c | 10 ---
drivers/mmc/fsl_esdhc.c | 14 +-
drivers/mmc/ftsdc010_mci.c
Hi Lukasz,
On Feb 27, 2014, at 10:36 AM, Lukasz Majewski wrote:
Hi Pantelis,
Hi Lukasz,
Looks fine to me. Let me run a few tests over the weekend and I'll
apply.
Have the run test gone smoothly?
In the middle of reworking some core stuff in mmc, will test when that's done.
Hi Lukasz,
On Feb 27, 2014, at 11:21 AM, Lukasz Majewski wrote:
Hi Pantelis,
Hi Lukasz,
On Feb 27, 2014, at 10:36 AM, Lukasz Majewski wrote:
Hi Pantelis,
Hi Lukasz,
Looks fine to me. Let me run a few tests over the weekend and I'll
apply.
Have the run test gone smoothly?
Hi Eli,
On Jun 12, 2014, at 12:41 PM, Eli Billauer wrote:
The current wait loop just reads the status 1 times, which makes the
actual timeout period platform-dependent. The udelay() call within the loop
makes the new timeout ~100 ms.
Signed-off-by: Eli Billauer eli.billa...@gmail.com
Hi Gerald,
On Jul 20, 2014, at 9:28 AM, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver and enable it for
Sheevaplugs
and OpenRD boards.
- Fix some typo and missing lines from patch import
Signed-off-by: Gerald Kerma drea...@doukki.net
---
Hi Stefan,
On Jul 29, 2014, at 9:21 PM, Stefan Roese wrote:
On 29.07.2014 18:39, drEagle wrote:
On 26/07/2014 13:54, Stefan Roese wrote:
On 25.07.2014 21:07, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver
and enable it for Sheevaplugs and OpenRD boards.
Hi there,
On Jul 29, 2014, at 7:39 PM, drEagle wrote:
Hi Stefan,
On 26/07/2014 13:54, Stefan Roese wrote:
On 25.07.2014 21:07, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver
and enable it for Sheevaplugs and OpenRD boards.
Signed-off-by: Gerald Kerma
Hi Lubomir,
On Jul 17, 2014, at 2:57 PM, Lubomir Rintel wrote:
Seems like the controller doesn't support the flag. None of the hi-speed cards
I've tried could be read, while they successfully worked with the quirk
enabled.
Signed-off-by: Lubomir Rintel lkund...@v3.sk
Tested-by: Stephen
: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Cc: Vladimir Zapolskiy v...@mleia.com
---
arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 6 +
drivers/mmc/Makefile| 1 +
drivers/mmc
: Lukasz Majewski l.majew...@samsung.com
Cc: Minkyu Kang mk7.k...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
Cc: Vladimir Zapolskiy v...@mleia.com
---
arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 6 +
drivers/mmc/Makefile| 1 +
drivers/mmc
: Pantelis Antoniou pa...@antoniou-consulting.com
Cc: Rajeshwari Shinde rajeshwar...@samsung.com
Cc: Jaehoon Chung jh80.ch...@samsung.com
Cc: Mischa Jonker mjon...@synopsys.com
---
drivers/mmc/dw_mmc.c |5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/dw_mmc.c b
Hi Bo,
On Jul 31, 2014, at 9:39 AM, Bo Shen wrote:
Add configuration register definition, this register only
exists on MCI IP version = 0x300.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
include/atmel_mci.h | 14 +-
1 file changed, 13 insertions(+), 1 deletion(-)
diff
Hi Bo,
On Jul 31, 2014, at 9:39 AM, Bo Shen wrote:
The mode register is different between MCI IP version.
So, according to MCI IP version to set the mode register.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/mmc/gen_atmel_mci.c | 56
Hi Bo,
On Jul 31, 2014, at 9:39 AM, Bo Shen wrote:
If the MCI IP version = 0x300, it supports hight speed mode
option, this patch enable it.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/mmc/gen_atmel_mci.c | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff
Hi Dmitry,
On Jul 30, 2014, at 1:19 PM, Dmitry Lifshitz wrote:
Add callback with __weak annotation to allow setup of environment
partition number in runtime from a board file.
Propagate mmc_switch_part() return value into init_mmc_for_env() instead
of -1 in case of failure.
Hi Dmitry,
On Jul 30, 2014, at 1:19 PM, Dmitry Lifshitz wrote:
Add missing mmc_get_env_addr() prototype in environment.h
Signed-off-by: Dmitry Lifshitz lifsh...@compulab.co.il
---
include/environment.h |6 ++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git
Hi Tom,
The following changes since commit 25b4adbba018633b943a99322bfb2fb819c0bafb:
include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
(2014-07-30 14:42:03 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up
Hi Marek,
[snip]
I don't want to be the first to defined it for all of armv7
Honestly, we should just enable this CONFIG_SYS_VSNPRINTF by default for the
good of humanity and all the things, since this unbounded string handling is
just evil (see how OpenSSL ended up, partly because
Hi Tom,
Sorry about that; It's all on my pile of work to do when I get back home.
On May 14, 2014, at 2:17 PM, Tom Rini wrote:
On Wed, May 14, 2014 at 11:30:35AM -0600, Stephen Warren wrote:
On 05/07/2014 12:19 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
All the
)
check_and_invalidate_dcache_range(cmd, data);
+#endif
}
esdhc_write32(regs-irqstat, -1);
--
1.7.9.5
Applied, thanks
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot
Hi Mateusz,
On Apr 29, 2014, at 9:15 PM, Mateusz Zalega wrote:
mmc_init() doesn't call get_timer() anymore if MMC is already
initialized.
Signed-off-by: Mateusz Zalega m.zal...@samsung.com
Cc: Pantelis Antoniou pa...@antoniou-consulting.com
---
Detached from earlier DFU, MMC, Gadget
*/
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
--
1.7.9.5
Applied
Thanks
-- Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman
Hi Frank,
On Apr 11, 2014, at 6:35 PM, Frank Bormann wrote:
Hi Pantos, hi Tom,
I sent this a couple of months ago to the mailing list, never really received
a response. We are testing 2014.04-rc3 right now and the issue is still
there. Would you still consider bringing this fix in for
MMC_STATUS_RDY_FOR_DATA (1 8)
#define MMC_STATUS_CURR_STATE (0xf 9)
#define MMC_STATUS_ERROR (1 19)
--
1.7.10.4
Applied,
Thanks
--Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http
Hi Pierre,
On Apr 24, 2014, at 11:30 AM, Pierre Aubert wrote:
This patch adds functions for read, write and authentication
key programming for the Replay Protected Memory Block partition
in the eMMC.
Signed-off-by: Pierre Aubert p.aub...@staubli.com
CC: Pantelis Antoniou pa...@antoniou
Control-C detect */
-
+int confirm_yesno(void);/* 1 if input is y, Y, yes or YES */
/*
* STDIO based functions (can always be used)
*/
--
1.7.6.5
This is reasonable, and I've applied it to my mmc tree,
Applied,
Thanks
-- Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou
--
1.8.1.5
Fixed typos and applied.
Thanks
-- Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
;
+ printf(** Bad device %s %s **\n, ifname, dev_hwpart_str);
+ dev = -1;
+ goto cleanup;
}
+cleanup:
+ free(dup_str);
return dev;
}
--
1.8.1.5
Applied
Thanks
-- Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
inline block_dev_desc_t *host_get_dev(int dev) { return NULL; }
--
1.8.1.5
Applied, but expect a follow up patch for returning something else than -1.
Thanks
-- Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing
manual placement.
Please verify that
it works properly on your end after the patches land at u-boot-mmc.
Thanks
-- Pantelis
Acked-by: Pantelis Antoniou pa...@antoniou-consulting.com
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman
Hi Tom,
The following changes since commit d7782d06534fe4fa47a49fa7c106de5ba85a9687:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-16
18:30:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mmc.git master
for you to fetch changes up to
Hi Stephen,
On May 23, 2014, at 6:58 PM, Stephen Warren wrote:
On 05/23/2014 03:21 AM, Pantelis Antoniou wrote:
Hi Stephen,
On May 7, 2014, at 9:19 PM, Stephen Warren wrote:
This enables specifying which eMMC HW partition to target for any U-Boot
command that uses the generic
mmc_select_hwpart(), so
I'm not sure how effective this will be. Still, it's one less place with
hard-coded -1.
Suggested-by: Pantelis Antoniou pa...@antoniou-consulting.com
Signed-off-by: Stephen Warren swar...@nvidia.com
---
drivers/mmc/mmc.c | 7 ---
1 file changed, 4 insertions(+), 3
1 - 100 of 413 matches
Mail list logo