On Friday 20 November 2015 08:52:54 Martin Orgonas wrote:
> Hello,
>
> I have Raspberry Pi Model B+ V1.2.
> I would like to use official Raspbian OS with U-Boot.
> When Raspberry Pi turn on then U-Boot starts and run Raspbian kernel.img.
> But i do not have anything kernel boot message on LCD moni
On Wednesday 25 November 2015 16:55:54 Sumeet Jauhar wrote:
> Hello All,
>
> I am new to Rpi and for a project I need to install Uboot for Rpi. For
> starters I installed Raspbian-jessie to the pi and it worked fine. Now I am
> attempting to use uboot but I don't succeed. I am trying to follow the
On Thursday 26 November 2015 12:25:14 Hans de Goede wrote:
> Hmm, I'm not familiar with the rpi usb controller, but AFAIK the rpi uses
> an onboard usb-2 hub, when talking to usb-1 devices attached to a usb-2
> hub you must address the tt in the first usb-2 hub upstream of the
> usb-1 device. See e
On Sunday 30 August 2015 19:10:59 Stefan Brüns wrote:
> The default config includes base.menu, not linux.list
>
> Signed-off-by: Stefan Brüns
> ---
> doc/README.pxe | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/doc/README.pxe b/doc/README.pxe
> index d017f60..bd175eb
Thx, Stefan
--
Stefan Brüns / Bergstraße 21 / 52062 Aachen
home: +49 241 53809034 mobile: +49 151 50412019
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tuesday 08 September 2015 08:56:12 Joe Hershberger wrote:
> On Mon, Sep 7, 2015 at 10:12 PM, Stefan Brüns
>
> wrote:
> > Using NAKs on empty RX fifo for bulk in transfers is the right choice
> > for a interrupt driven model, but U-Boot uses polling and expects an
> > immediate answer if there
On Thursday 01 October 2015 16:27:11 Wolfgang Denk wrote:
> Dear Jacob,
>
> In message <1443622325-30792-1-git-send-email-j-stiff...@ti.com> you wrote:
> > The net_boot_file_name buffer is used as storage for the bootfilename
> > command line argument to network boot commands such as tftp and nfs.
On Sunday 13 December 2015 05:49:24 Marek Vasut wrote:
> On Sunday, December 13, 2015 at 05:47:18 AM, Stefan Brüns wrote:
> > The configuration descriptor includes all interface, endpoint and
> > auxiliary descriptors (e.g. report, union) so 512 may not be enough.
> >
> > Signed-off-by: Stefan Brü
On Wednesday 16 December 2015 11:29:14 Marek Vasut wrote:
> > > + if (!in && xfer_len) {
> >
> > Do zero-length memcpy or flush_dcache_range actually cause an issue?
>
> I believe they should not, based on how they are implemented.
I think that's correct, it is just a minor optimization.
On Tuesday 15 December 2015 20:07:26 Stephen Warren wrote:
> On 12/12/2015 09:17 PM, Stefan Brüns wrote:
> > A function is allowed to return NAKs during the DATA stage to control
> > data flow control. NAKs during the STATUS stage signal the function
> > is still processing the request.
>
> For my
On Tuesday 15 December 2015 20:17:32 Stephen Warren wrote:
> On 12/12/2015 09:17 PM, Stefan Brüns wrote:
> > Start split and complete split tokens need the hub address and the
> > downstream port of the first HS hub (device view).
> > Code copied from host/ehci_hcd.c
>
> Rather than cut/paste this
On Friday 18 December 2015 15:41:10 Simon Glass wrote:
> Hi,
>
> On 17 December 2015 at 18:07, Stefan Brüns
wrote:
> > The configuration descriptor includes all interface, endpoint and
> > auxiliary descriptors (e.g. report, union) so 512 bytes may not be enough.
> >
> > Signed-off-by: Stefan B
On Friday 18 December 2015 11:00:19 Hans de Goede wrote:
> Hi,
>
> On 18-12-15 02:11, Stefan Brüns wrote:
> > Start split and complete split tokens need the hub address and the
> > downstream port of the first HS hub (device view).
> >
> > The core of the function was duplicated in both host/ehci
On Saturday 19 December 2015 13:29:38 Simon Glass wrote:
> Hi Stafan,
>
> On 19 December 2015 at 08:23, Stefan Bruens
>
> wrote:
> > On Friday 18 December 2015 15:41:10 Simon Glass wrote:
> >> Hi,
> >>
> >> On 17 December 2015 at 18:07, Stefan
On Tuesday 15 December 2015 20:36:02 Stephen Warren wrote:
> On 12/12/2015 09:17 PM, Stefan Brüns wrote:
> > In contrast to non-SPLIT transfers each transaction has to be submitted
> > as an individual chunk. Handling of ACK/NAk/NYET handshakes depends on
> > transaction (non-SPLIT/SSPLIT/CSPLIT),
On Monday 21 December 2015 21:27:01 Marek Vasut wrote:
> On Monday, December 21, 2015 at 08:33:31 PM, Hans de Goede wrote:
> > This patch needs to be re-spun to apply on top of the compile fixed [patch
> > 1/2] of this set. With that done this patch is:
> >
> > Reviewed-by: Hans de Goede
> > Test
Hi Joe,
On Monday 21 December 2015 16:50:52 Joe Hershberger wrote:
> Hi Stefan,
>
> On Mon, Dec 21, 2015 at 4:31 PM, Joe Hershberger
wrote:
> > Introduced in 45b4773 (net/arp: account for ARP delay, avoid duplicate
> > packets on timeout)
> >
> > Check the arp timeout and adjust the timeout st
On Sonntag, 27. Dezember 2015 18:28:09 CET Mateusz Kulikowski wrote:
> Use existing library function to poll bit(s).
>
> Signed-off-by: Mateusz Kulikowski
It might be useful to have not only a relative timeout, but also an absolute
timeout. For dwc2, the timeout handling could be moved from the
On Montag, 11. Januar 2016 09:59:09 CET Simon Glass wrote:
> Hi Josh,
>
> On 8 January 2016 at 06:27, Josh Sanford wrote:
> > Thanks Simon,
> >
> > I've been looking through the code you referenced. So these patches are
> > just standalone snippets and not yet part of any branch? (I'm just not
On Mittwoch, 5. Oktober 2016 10:51:04 CEST Simon Glass wrote:
> Hi Masahiro,
>
> On 4 October 2016 at 21:51, Masahiro Yamada
> >
> > We are already suffering from U-Boot specific properties like
> > "u-boot,dm-pre-reloc", which make it difficult to
> > simply copy DT files from the kernel tree.
>
On Donnerstag, 6. Oktober 2016 12:32:12 CEST Eric Anholt wrote:
> Alexander Graf writes:
> >> Am 05.10.2016 um 18:48 schrieb Fabian Vogt :
> >>
> >> Hi,
> >>
> >> Am Mittwoch, 5. Oktober 2016, 09:54:46 CEST schrieb Stephen Warren:
> >>> On 09/26/2016 06:26 AM, Fabian Vogt wrote:
> This patc
On Freitag, 7. Oktober 2016 16:42:40 CEST Tom Rini wrote:
> On Thu, Oct 06, 2016 at 09:42:52PM -0700, Eric Anholt wrote:
> > Stefan Bruens writes:
> > > On Donnerstag, 6. Oktober 2016 12:32:12 CEST Eric Anholt wrote:
> > >> Alexander Graf writes:
> > >>
Hi,
I have started diving into the u-boot python tests. Now I have come accross
two problems:
1. I would like to access the config, specifically the paths to e.g.
build_dir, result_dir, ...
2. I would like to run and log system commands
Now while I can do this via the u_boot_console fixture, I
On Freitag, 12. August 2016 15:16:20 CEST Michael Walle wrote:
> All fields were accessed directly instead of using the proper byte swap
> functions. Thus, ext4 write support was only usable on little-endian
> architectures. Fix this.
>
> Signed-off-by: Michael Walle
I have tested this on sandbo
On Freitag, 19. August 2016 15:54:51 CEST you wrote:
> On Sun, Aug 14, 2016 at 05:11:04AM +0200, Stefan Brüns wrote:
> > The following command triggers a segfault in search_dir:
> > ./sandbox/u-boot -c 'host bind 0 ./sandbox/test/fs/3GB.ext4.img ;
> >
> > ext4write host 0 0 /./foo 0x10'
> >
>
Hi everyone,
although 'done' by itself is not a syntactically correct command, it should
not crash u-boot.
Kind regards,
Stefan
-
(gdb) r
Starting program: /home/stefan/Documents/Sources/u-boot/sandbox/u-boot -c done
Missing separate debuginfos, use: zypper install glibc-
debuginfo-2.23-6.
On Dienstag, 23. August 2016 10:27:42 CEST Michael Walle wrote:
> direntlen is always >= 8. Therefore, the loop condition is always true.
>
> Signed-off-by: Michael Walle
> Suggested-by: Stefan Brüns
Thinking again about it, direntlen is read from disk, and as any outside data
should be untrus
Hi Michael,
found two more errors, see below.
Kind regards,
Stefan
On Montag, 29. August 2016 10:46:45 CEST Michael Walle wrote:
> All fields were accessed directly instead of using the proper byte swap
> functions. Thus, ext4 write support was only usable on little-endian
> architectures. Fix
On Sonntag, 28. August 2016 22:42:38 CEST you wrote:
> Make sure the the extra_isize field (offset 128) is initialized to 0 to
> mark any extra data as invalid.
>
> Signed-off-by: Stefan Brüns
> ---
> fs/ext4/ext4_write.c | 12 +---
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
>
On Donnerstag, 11. August 2016 22:52:05 CEST you wrote:
> DM added carriage-returns to every newline. Strip everything after the
> 32 character long mdsum.
>
> Signed-off-by: Stefan Brüns
> ---
> test/fs/fs-test.sh | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/test/fs
On Montag, 12. September 2016 12:39:35 CEST you wrote:
> On 09/11/2016 02:46 PM, Stefan Brüns wrote:
> > This is a regression test for a crash happening if the first dirent
> > in the block matches. Code tried to access a predecessor entry which
> > does not exist.
> > The crash happened for any bl
On Montag, 12. September 2016 12:44:08 CEST you wrote:
> On 09/11/2016 02:46 PM, Stefan Brüns wrote:
> > / and /./ should reference the same file.
> >
> > diff --git a/test/fs/fs-test.sh b/test/fs/fs-test.sh
> >
> > +# Read 1MB from small file
> > +${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_
On Samstag, 1. April 2017 20:05:37 CEST Simon Glass wrote:
> Raspberry Pi uses a DWC2 USB controller and a SMSC USB Ethernet adaptor.
> Driver model support for these is available.
>
> This series does the following:
> - Enable CONFIG_DM_ETH and CONFIG_DM_USB on Raspberry Pi
> - Convert the MMC dr
On Sonntag, 2. April 2017 05:01:41 CEST Marek Vasut wrote:
> On 04/02/2017 01:40 AM, Simon Glass wrote:
> > Hi Marek,
> >
> > On 1 April 2017 at 14:15, Marek Vasut wrote:
> >> On 04/01/2017 08:05 PM, Simon Glass wrote:
> >>> On Raspberry Pi 2 and 3 a problem was noticed when enabling driver model
On Sonntag, 2. April 2017 17:43:38 CEST Simon Glass wrote:
> Hi Stefan,
>
> On 2 April 2017 at 07:10, Stefan Bruens
wrote:
> > On Sonntag, 2. April 2017 05:01:41 CEST Marek Vasut wrote:
> >> On 04/02/2017 01:40 AM, Simon Glass wrote:
> >> > Hi Marek,
>
On Samstag, 4. Februar 2017 18:38:38 CET d...@synoia.com wrote:
> The u-boot DHCP Command appears to populate some DHCP options, for example:
> rootpath and gateway, netamsk and ipaddress. It does not appear to populate
> Bootfile Name (Option 67) and Boot Server Host Name (Option 66)
>
> Can popu
On Samstag, 4. Februar 2017 20:16:20 CET d...@synoia.com wrote:
> Stefan
> Thanks for the reply
> I suspect it is the offer response to the DHCP u-boot command.
>
> Options 66/67 are important in the netboot scenario.
>
> Regards Duncan Hare
Dear Duncan,
it would be good if you were more specif
On Donnerstag, 5. Januar 2017 17:15:02 CET you wrote:
> On 01/01/2017 02:48 PM, Stefan Bruens wrote:
> > On Montag, 12. Dezember 2016 11:04:34 CET you wrote:
> >> On 12/04/2016 05:52 PM, Stefan Brüns wrote:
> >>> From: Stefan Brüns
> >>>
> >&
On Donnerstag, 29. Juni 2017 08:13:41 CEST Stefan Roese wrote:
> Hi Bin,
>
> On 29.06.2017 07:39, Bin Meng wrote:
> > Hi Stefan,
> >
> > On Wed, Jun 28, 2017 at 8:47 PM, Stefan Roese wrote:
[...]
> >>> I am more concerned about
> >>> the "USB device descriptor short read (expected 18, got 8)". T
On Freitag, 22. Januar 2016 02:30:43 CET you wrote:
> USB protocol allows for 16 IN and 16 OUT endpoints (USB 2.0 Spec,
> 8.3.2.2 Endpoint Field). A function may have an EP 1 for both IN and OUT,
> so these two should be kept separate. As EPs are either BULK or INTERRUPT
> (or ISO), it is fine to h
On Samstag, 5. November 2016 21:22:43 CET Stephen Warren wrote:
> On 11/05/2016 06:32 PM, Stefan Brüns wrote:
> > Support was already implemented, but not hooked up. This fixes several
> > fails in the test cases.
> >
> > diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c
> >
> > @@ -217,21 +217,16
On Dienstag, 6. Dezember 2016 22:47:42 CET Simon Glass wrote:
> Hi Stefan,
>
> On 4 December 2016 at 19:52, Stefan Brüns
wrote:
> > The runner actually has no console dependency, only on the log provided
> > by the console. Accept both u_boot_console or a multiplexed_log.
>
> In that case I won
On Freitag, 9. Dezember 2016 13:55:37 CET Philipp Skadorov wrote:
> The u-boot command fatwrite empties FAT clusters from the beginning
> till the end of the file.
> Specifically for FAT12 it fails to detect the end of the file and goes
> beyond the file bounds thus corrupting the file system.
>
>
On Dienstag, 29. November 2016 16:23:28 CET Sébastien Szymanski wrote:
> On 11/29/2016 03:38 PM, Brüns, Stefan wrote:
> > On Dienstag, 29. November 2016 14:10:54 CET Sébastien Szymanski wrote:
> >>> Btw, which u-boot version are you using?
> >>
> >> I first noticed the issue on U-Boot 2016.05 so I
Hi Kever,
can you test the ext4 patch I just posted?
Kind regards,
Stefan
--
Stefan Brüns / Bergstraße 21 / 52062 Aachen
home: +49 241 53809034 mobile: +49 151 50412019
work: +49 2405 49936-424
___
U-Boot mailing list
U-Boot@lists.denx.de
htt
On Sonntag, 13. August 2017 12:45:26 CEST Rob Clark wrote:
> Spotted by chance, when trying to remove file_fat_ls(), I noticed there
> were some dead users of the API.
>
> Signed-off-by: Rob Clark
> ---
> fs/fat/Makefile | 4 --
> fs/fat/file.c | 183
> ---
On Sonntag, 13. August 2017 12:45:28 CEST Rob Clark wrote:
> Noticed when comparing our output to linux. There are some lcase bits
> which control whether filename and/or extension should be downcase'd.
>
> Signed-off-by: Rob Clark
> ---
> fs/fat/fat.c | 11 ---
> fs/fat/fat_write
On Sonntag, 13. August 2017 23:36:57 CEST Simon Glass wrote:
> Hi Rob,
>
> On 10 August 2017 at 12:13, Rob Clark wrote:
> > On Sun, Aug 6, 2017 at 1:16 AM, Simon Glass wrote:
> >> Hi Rob,
> >>
> >> On 3 August 2017 at 13:36, Rob Clark wrote:
> >>> On Thu, Aug 3, 2017 at 3:10 PM, Brüns, Stefan
On Dienstag, 17. Oktober 2017 20:05:40 CEST you wrote:
> > On 17 Oct 2017, at 19:55, Stefan Brüns
> > wrote:
> >
> > Commit 02e43537b322 ("part_efi: support padding between the GPT
> > header and partition entries") added support for deviating from
> > the typical GPT layout.
> >
> > Explicitly
On Dienstag, 27. Dezember 2016 10:44:07 CET Kever Yang wrote:
> Hi Stefan,
>
> With this patch, the image create by genext2fs can be mount in
> U-Boot, thanks.
Thanks for testing.
@Tom: this is probably a candidate for u-boot 2017.01 ...
> On 12/27/2016 09:35 AM, Stefan Brüns wrote:
> > g
On Montag, 12. Dezember 2016 11:04:34 CET you wrote:
> On 12/04/2016 05:52 PM, Stefan Brüns wrote:
> > From: Stefan Brüns
> >
> > The following checks are currently implemented:
> > 1. listing a directory
> > 2. verifying size of a file
> > 3. veryfying md5sum for a file region
> > 4. reading th
On Freitag, 20. Januar 2017 11:30:47 CET Borisa Jevtic wrote:
> Hi guys.
>
> I have come across a bulletin that blames the problem (described bellow) on
> the U-Boot bootloader:
>
> https://e2e.ti.com/support/embedded/linux/f/354/t/73788
Please read the whole page, where it is stated:
"Solution:
52 matches
Mail list logo