On Friday, November 07, 2014 at 02:08:14 AM, Peng Fan wrote:
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port
在 11/7/2014 4:26 PM, Marek Vasut 写道:
On Friday, November 07, 2014 at 02:08:14 AM, Peng Fan wrote:
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller
On Friday, November 07, 2014 at 12:08:03 PM, Peng Fan wrote:
在 11/7/2014 4:26 PM, Marek Vasut 写道:
On Friday, November 07, 2014 at 02:08:14 AM, Peng Fan wrote:
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port on mx6slevk board:
1. otg port
在 11/7/2014 7:10 PM, Marek Vasut 写道:
On Friday, November 07, 2014 at 12:08:03 PM, Peng Fan wrote:
在 11/7/2014 4:26 PM, Marek Vasut 写道:
On Friday, November 07, 2014 at 02:08:14 AM, Peng Fan wrote:
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode
There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port has not ID pin set:
otg1 core --- board otg port
otg2 core --- board
5 matches
Mail list logo