Re: [U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1

2016-10-09 Thread Stephen Arnold 
Please ignore the crufty v4 cover; the following v5 is correct (a
single patch) as requested by Jagan.

Thanks, Steve

On Sun, Oct 9, 2016 at 2:04 PM, Stephen Arnold
 wrote:
> From: Steve Arnold 
>
> * changes from lamobo-r1 required include:
>   - unset ahci power pin
>   - usbvbus gpio pin change
>   - mmc cd gpio pin change
>   - enable uart2, set default LED trigger
>   - CONFIG_GMAC_TX_DELAY change
>
> Changes for v2:
>   - incorprated feedback for config options (remove 3, add 1)
> Changes for v3/v4:
>   - re-submit (no change to patch payload) with cover
>
> Steve Arnold (2):
>   ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1
>   ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1
>
>  arch/arm/dts/Makefile  |   1 +
>  arch/arm/dts/sun7i-a20-bananapi-r1.dts | 376 
> +
>  configs/Bananapi_R1_defconfig  |  16 ++
>  3 files changed, 393 insertions(+)
>  create mode 100644 arch/arm/dts/sun7i-a20-bananapi-r1.dts
>  create mode 100644 configs/Bananapi_R1_defconfig
>
> Signed-off-by: Steve Arnold 
> Cc: Ian Campbell 
> Cc: Hans De Goede 
>
> --
> 2.9.3
>
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1

2016-10-09 Thread Stephen Arnold 
From: Steve Arnold 

* changes from lamobo-r1 required include:
  - unset ahci power pin
  - usbvbus gpio pin change
  - mmc cd gpio pin change
  - enable uart2, set default LED trigger
  - CONFIG_GMAC_TX_DELAY change

Changes for v2:
  - incorprated feedback for config options (remove 3, add 1)
Changes for v3/v4:
  - re-submit (no change to patch payload) with cover

Steve Arnold (2):
  ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1
  ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1

 arch/arm/dts/Makefile  |   1 +
 arch/arm/dts/sun7i-a20-bananapi-r1.dts | 376 +
 configs/Bananapi_R1_defconfig  |  16 ++
 3 files changed, 393 insertions(+)
 create mode 100644 arch/arm/dts/sun7i-a20-bananapi-r1.dts
 create mode 100644 configs/Bananapi_R1_defconfig

Signed-off-by: Steve Arnold 
Cc: Ian Campbell 
Cc: Hans De Goede 

-- 
2.9.3

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1

2016-10-09 Thread Jagan Teki 
On Fri, Oct 7, 2016 at 10:13 AM, Stephen Arnold
 wrote:
> From: Steve Arnold 
>
> * changes from lamobo-r1 required include:
>   - unset ahci power pin
>   - usbvbus gpio pin change
>   - mmc cd gpio pin change
>   - enable uart2, set default LED trigger
>   - CONFIG_GMAC_TX_DELAY change
>
> Changes for v2:
>   - incorprated feedback for config options (remove 3, add 1)
> Changes for v3/v4:
>   - re-submit (no change to patch payload) with cover
>
> Steve Arnold (2):
>   ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1
>   ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1

Some how I lost the previous discussion about this thread, but please
combine these two patches into one otherwise patch one get bisect-able
issue.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v4 0/2] ARM: add support for Bananapi BPI-R1

2016-10-06 Thread Stephen Arnold 
From: Steve Arnold 

* changes from lamobo-r1 required include:
  - unset ahci power pin
  - usbvbus gpio pin change
  - mmc cd gpio pin change
  - enable uart2, set default LED trigger
  - CONFIG_GMAC_TX_DELAY change

Changes for v2:
  - incorprated feedback for config options (remove 3, add 1)
Changes for v3/v4:
  - re-submit (no change to patch payload) with cover

Steve Arnold (2):
  ARM: sun7i: config: add config for Sinovoip/Bananapi BPI-R1
  ARM: sun7i: dts: add support for Sinovoip/Bananapi BPI-R1

 arch/arm/dts/Makefile  |   1 +
 arch/arm/dts/sun7i-a20-bananapi-r1.dts | 376 +
 configs/Bananapi_R1_defconfig  |  16 ++
 3 files changed, 393 insertions(+)
 create mode 100644 arch/arm/dts/sun7i-a20-bananapi-r1.dts
 create mode 100644 configs/Bananapi_R1_defconfig

Signed-off-by: Steve Arnold 
Cc: Ian Campbell 
Cc: Hans De Goede 

-- 
2.9.3

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot