[U-Boot] [PATCH v4 04/11] phy: ti-pip3-phy: Add support for USB3 PHY

[Jean-Jacques Hiblot]

From: Vignesh R <vigne...@ti.com>

Add support to handle USB3 PHYs present on AM57xx/DRA7xx SoCs. This is
needed to move AM57xx to DM_USB.

Signed-off-by: Vignesh R <vigne...@ti.com>

Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2:
- Add USB3 support to ti-pipe3-phy driver

 drivers/phy/ti-pipe3-phy.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c
index babf2ff..9fddd01 100644
--- a/drivers/phy/ti-pipe3-phy.c
+++ b/drivers/phy/ti-pipe3-phy.c
@@ -266,10 +266,13 @@ static int pipe3_exit(struct phy *phy)
                return -EBUSY;
        }
 
-       val = readl(pipe3->pll_reset_reg);
-       writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
-       mdelay(1);
-       writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
+       if (pipe3->pll_reset_reg) {
+               val = readl(pipe3->pll_reset_reg);
+               writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
+               mdelay(1);
+               writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
+       }
+
        return 0;
 }
 
@@ -332,9 +335,11 @@ static int pipe3_phy_probe(struct udevice *dev)
        if (!pipe3->power_reg)
                return -EINVAL;
 
-       pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
-       if (!pipe3->pll_reset_reg)
-               return -EINVAL;
+       if (device_is_compatible(dev, "ti,phy-pipe3-sata")) {
+               pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
+               if (!pipe3->pll_reset_reg)
+                       return -EINVAL;
+       }
 
        pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev);
 
@@ -351,8 +356,19 @@ static struct pipe3_dpll_map dpll_map_sata[] = {
        { },                                    /* Terminator */
 };
 
+static struct pipe3_dpll_map dpll_map_usb[] = {
+       {12000000, {1250, 5, 4, 20, 0} },       /* 12 MHz */
+       {16800000, {3125, 20, 4, 20, 0} },      /* 16.8 MHz */
+       {19200000, {1172, 8, 4, 20, 65537} },   /* 19.2 MHz */
+       {20000000, {1000, 7, 4, 10, 0} },       /* 20 MHz */
+       {26000000, {1250, 12, 4, 20, 0} },      /* 26 MHz */
+       {38400000, {3125, 47, 4, 20, 92843} },  /* 38.4 MHz */
+       { },                                    /* Terminator */
+};
+
 static const struct udevice_id pipe3_phy_ids[] = {
        { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata },
+       { .compatible = "ti,omap-usb3", .data = (ulong)&dpll_map_usb},
        { }
 };
 
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot