Re: [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes
Hi Joe, On 09.08.2017 17:24, Joe Hershberger wrote: On Wed, Aug 9, 2017 at 12:56 AM, Stefan Roesewrote: Hi Joe, On 08.08.2017 17:57, Joe Hershberger wrote: Hi Stefan (and Stefan), On Tue, Aug 8, 2017 at 7:05 AM, Stefan Roese wrote: Hi Joe, On 11.07.2017 10:04, Stefan Roese wrote: On 21.06.2017 10:31, stef...@malvell.com wrote: Huh? Sent from a typo email address? Where is the problem with the Stefan Chulski's email address? Sorry, I can't spot it. Just above and in the reply-to of the messages: stefanc@ma>l Ah, thanks. That's pretty tedious. I recommend fixing your git config. And if that's fine, I recommend using patman so this won't happen again. From: Stefan Chulski Issues were found during internal QA phase. Stefan Chulski (10): net: mvpp2x: Add GPIO configuration support net: mvpp2x: fix phy connected to wrong mdio issue net: mvpp2x: Enable GoP packet padding in TX net: mvpp2x: fix BM configuration overrun issue net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK net: mvpp2x: remove MBUS configurations from MvPP22 driver net: mvpp2x: Remove IRQ configuration from u-boot net: mvpp2x: Set BM pool high address net: mvpp2x: remove TX drain from transmit routine net: mvpp2x: Set BM poll size once during priv probe drivers/net/mvpp2.c | 189 ++-- 1 file changed, 94 insertions(+), 95 deletions(-) Joe, do you have any comments on these mvpp2 patches? Gently ping on these patches again. Joe, do you have any comments on these? Do you want to take these patches via your tree? Or should I push them if you don't have any objections? Reviewing now. I generally use patchwork to remember what I have to do. I guess if I didn't rely on that I would set up better work queue email filters. Sorry for the delay. I figured since the series is assigned to you in PW, that you wanted it through your tree. I'm fine either way. I assume that Tom assigned them to me (I didn't do it at least). But I can definitely pull these patches via the Marvell tree, once all open issues are resolved and all patches have your Acked-by tag. Sounds good! Great. I'm build testing right now and will send the pull request, once this has finished without any issues. Thanks, Stefan ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes
On Wed, Aug 9, 2017 at 12:56 AM, Stefan Roesewrote: > Hi Joe, > > On 08.08.2017 17:57, Joe Hershberger wrote: >> >> Hi Stefan (and Stefan), >> >> On Tue, Aug 8, 2017 at 7:05 AM, Stefan Roese wrote: >>> >>> Hi Joe, >>> >>> On 11.07.2017 10:04, Stefan Roese wrote: On 21.06.2017 10:31, stef...@malvell.com wrote: >> >> >> Huh? Sent from a typo email address? > > > Where is the problem with the Stefan Chulski's email address? > Sorry, I can't spot it. Just above and in the reply-to of the messages: stefanc@ma>l> That's pretty tedious. I >> recommend fixing your git config. And if that's fine, I recommend >> using patman so this won't happen again. >> > > From: Stefan Chulski > > Issues were found during internal QA phase. > > Stefan Chulski (10): > net: mvpp2x: Add GPIO configuration support > net: mvpp2x: fix phy connected to wrong mdio issue > net: mvpp2x: Enable GoP packet padding in TX > net: mvpp2x: fix BM configuration overrun issue > net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK > net: mvpp2x: remove MBUS configurations from MvPP22 driver > net: mvpp2x: Remove IRQ configuration from u-boot > net: mvpp2x: Set BM pool high address > net: mvpp2x: remove TX drain from transmit routine > net: mvpp2x: Set BM poll size once during priv probe > >drivers/net/mvpp2.c | 189 > ++-- >1 file changed, 94 insertions(+), 95 deletions(-) Joe, do you have any comments on these mvpp2 patches? >>> >>> >>> >>> Gently ping on these patches again. Joe, do you have any comments >>> on these? Do you want to take these patches via your tree? Or >>> should I push them if you don't have any objections? >> >> >> Reviewing now. I generally use patchwork to remember what I have to >> do. I guess if I didn't rely on that I would set up better work queue >> email filters. Sorry for the delay. >> >> I figured since the series is assigned to you in PW, that you wanted >> it through your tree. I'm fine either way. > > > I assume that Tom assigned them to me (I didn't do it at least). > But I can definitely pull these patches via the Marvell tree, once > all open issues are resolved and all patches have your Acked-by > tag. Sounds good! > Thanks for the review! > > Thanks, > Stefan ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes
Hi Joe, On 08.08.2017 17:57, Joe Hershberger wrote: Hi Stefan (and Stefan), On Tue, Aug 8, 2017 at 7:05 AM, Stefan Roesewrote: Hi Joe, On 11.07.2017 10:04, Stefan Roese wrote: On 21.06.2017 10:31, stef...@malvell.com wrote: Huh? Sent from a typo email address? Where is the problem with the Stefan Chulski's email address? Sorry, I can't spot it. That's pretty tedious. I recommend fixing your git config. And if that's fine, I recommend using patman so this won't happen again. From: Stefan Chulski Issues were found during internal QA phase. Stefan Chulski (10): net: mvpp2x: Add GPIO configuration support net: mvpp2x: fix phy connected to wrong mdio issue net: mvpp2x: Enable GoP packet padding in TX net: mvpp2x: fix BM configuration overrun issue net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK net: mvpp2x: remove MBUS configurations from MvPP22 driver net: mvpp2x: Remove IRQ configuration from u-boot net: mvpp2x: Set BM pool high address net: mvpp2x: remove TX drain from transmit routine net: mvpp2x: Set BM poll size once during priv probe drivers/net/mvpp2.c | 189 ++-- 1 file changed, 94 insertions(+), 95 deletions(-) Joe, do you have any comments on these mvpp2 patches? Gently ping on these patches again. Joe, do you have any comments on these? Do you want to take these patches via your tree? Or should I push them if you don't have any objections? Reviewing now. I generally use patchwork to remember what I have to do. I guess if I didn't rely on that I would set up better work queue email filters. Sorry for the delay. I figured since the series is assigned to you in PW, that you wanted it through your tree. I'm fine either way. I assume that Tom assigned them to me (I didn't do it at least). But I can definitely pull these patches via the Marvell tree, once all open issues are resolved and all patches have your Acked-by tag. Thanks for the review! Thanks, Stefan ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes
Hi Stefan (and Stefan), On Tue, Aug 8, 2017 at 7:05 AM, Stefan Roesewrote: > Hi Joe, > > On 11.07.2017 10:04, Stefan Roese wrote: >> >> On 21.06.2017 10:31, stef...@malvell.com wrote: Huh? Sent from a typo email address? That's pretty tedious. I recommend fixing your git config. And if that's fine, I recommend using patman so this won't happen again. >>> >>> From: Stefan Chulski >>> >>> Issues were found during internal QA phase. >>> >>> Stefan Chulski (10): >>>net: mvpp2x: Add GPIO configuration support >>>net: mvpp2x: fix phy connected to wrong mdio issue >>>net: mvpp2x: Enable GoP packet padding in TX >>>net: mvpp2x: fix BM configuration overrun issue >>>net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK >>>net: mvpp2x: remove MBUS configurations from MvPP22 driver >>>net: mvpp2x: Remove IRQ configuration from u-boot >>>net: mvpp2x: Set BM pool high address >>>net: mvpp2x: remove TX drain from transmit routine >>>net: mvpp2x: Set BM poll size once during priv probe >>> >>> drivers/net/mvpp2.c | 189 >>> ++-- >>> 1 file changed, 94 insertions(+), 95 deletions(-) >> >> >> Joe, do you have any comments on these mvpp2 patches? > > > Gently ping on these patches again. Joe, do you have any comments > on these? Do you want to take these patches via your tree? Or > should I push them if you don't have any objections? Reviewing now. I generally use patchwork to remember what I have to do. I guess if I didn't rely on that I would set up better work queue email filters. Sorry for the delay. I figured since the series is assigned to you in PW, that you wanted it through your tree. I'm fine either way. Cheers, -Joe ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes
Hi Joe, On 11.07.2017 10:04, Stefan Roese wrote: On 21.06.2017 10:31, stef...@malvell.com wrote: From: Stefan ChulskiIssues were found during internal QA phase. Stefan Chulski (10): net: mvpp2x: Add GPIO configuration support net: mvpp2x: fix phy connected to wrong mdio issue net: mvpp2x: Enable GoP packet padding in TX net: mvpp2x: fix BM configuration overrun issue net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK net: mvpp2x: remove MBUS configurations from MvPP22 driver net: mvpp2x: Remove IRQ configuration from u-boot net: mvpp2x: Set BM pool high address net: mvpp2x: remove TX drain from transmit routine net: mvpp2x: Set BM poll size once during priv probe drivers/net/mvpp2.c | 189 ++-- 1 file changed, 94 insertions(+), 95 deletions(-) Joe, do you have any comments on these mvpp2 patches? Gently ping on these patches again. Joe, do you have any comments on these? Do you want to take these patches via your tree? Or should I push them if you don't have any objections? Thanks, Stefan ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes
Hi Joe, On 21.06.2017 10:31, stef...@malvell.com wrote: From: Stefan ChulskiIssues were found during internal QA phase. Stefan Chulski (10): net: mvpp2x: Add GPIO configuration support net: mvpp2x: fix phy connected to wrong mdio issue net: mvpp2x: Enable GoP packet padding in TX net: mvpp2x: fix BM configuration overrun issue net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK net: mvpp2x: remove MBUS configurations from MvPP22 driver net: mvpp2x: Remove IRQ configuration from u-boot net: mvpp2x: Set BM pool high address net: mvpp2x: remove TX drain from transmit routine net: mvpp2x: Set BM poll size once during priv probe drivers/net/mvpp2.c | 189 ++-- 1 file changed, 94 insertions(+), 95 deletions(-) Joe, do you have any comments on these mvpp2 patches? Thanks, Stefan ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot