Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert Freescale ESPI driver to driver model
On Fri, Jun 21, 2019 at 7:52 AM Chuanhua Han wrote: > > Modify the Freescale ESPI driver to support the driver model. > Also resolved the following problems: > > = WARNING == > This board does not use CONFIG_DM_SPI. Please update > the board before v2019.04 for no dm conversion > and v2019.07 for partially dm converted drivers. > Failure to update can lead to driver/board removal > See doc/driver-model/MIGRATION.txt for more info. > > = WARNING == > This board does not use CONFIG_DM_SPI_FLASH. Please update > the board to use CONFIG_SPI_FLASH before the v2019.07 release. > Failure to update by the deadline may result in board removal. > See doc/driver-model/MIGRATION.txt for more info. > > > Signed-off-by: Chuanhua Han > --- > Changes in v4: > - Update copyright information. > - Move the fsl_espi_platdata data structure to the > include/dm/platform_data/. > - Merge the contents of the fsl_espi_priv structure into > the fsl_spi_slave structure. > - Implement the fsl_espi_set_speed function. > - Implement the fsl_espi_set_mode function. > - Implement the espi_release_bus function. > - Remove unwanted fsl_espi_bind functions. > - Implement the fsl_espi_child_pre_probe function as needed. > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) && > !CONFIG_IS_ENABLED(OF_PLATDATA). > Changes in v3: > - Add a cover-letter for this patch set. > Changes in v2: > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > drivers/spi/fsl_espi.c | 444 > include/dm/platform_data/fsl_espi.h | 16 + > 2 files changed, 339 insertions(+), 121 deletions(-) > create mode 100644 include/dm/platform_data/fsl_espi.h > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c > index 7444ae1a06..849f65f0e6 100644 > --- a/drivers/spi/fsl_espi.c > +++ b/drivers/spi/fsl_espi.c > @@ -3,18 +3,25 @@ > * eSPI controller driver. > * > * Copyright 2010-2011 Freescale Semiconductor, Inc. > + * Copyright 2019 NXP > * Author: Mingkai Hu (mingkai...@freescale.com) > + *Chuanhua Han (chuanhua@nxp.com) > */ > > #include > - > #include > #include > #include > +#include > +#include > +#include > +#include > > struct fsl_spi_slave { > struct spi_slave slave; > ccsr_espi_t *espi; > + u32 speed_hz; > + unsigned int cs; > unsigned intdiv16; > unsigned intpm; > int tx_timeout; > @@ -28,6 +35,9 @@ struct fsl_spi_slave { > #define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) > #define US_PER_SECOND 100UL > > +/* default SCK frequency, unit: HZ */ > +#define FSL_ESPI_DEFAULT_SCK_FREQ 1000 > + > #define ESPI_MAX_CS_NUM4 > #define ESPI_FIFO_WIDTH_BIT32 > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > - unsigned int max_hz, unsigned int mode) > -{ > - struct fsl_spi_slave *fsl; > - sys_info_t sysinfo; > - unsigned long spibrg = 0; > - unsigned long spi_freq = 0; > - unsigned char pm = 0; > - > - if (!spi_cs_is_valid(bus, cs)) > - return NULL; > - > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > - if (!fsl) > - return NULL; > - > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > - fsl->mode = mode; > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > - > - /* Set eSPI BRG clock source */ > - get_sys_info(&sysinfo); > - spibrg = sysinfo.freq_systembus / 2; > - fsl->div16 = 0; > - if ((spibrg / max_hz) > 32) { > - fsl->div16 = ESPI_CSMODE_DIV16; > - pm = spibrg / (max_hz * 16 * 2); > - if (pm > 16) { > - pm = 16; > - debug("Requested speed is too low: %d Hz, %ld Hz " > - "is used.\n", max_hz, spibrg / (32 * 16)); > - } > - } else > - pm = spibrg / (max_hz * 2); > - if (pm) > - pm--; > - fsl->pm = pm; > - > - if (fsl->div16) > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > - else > - spi_freq = spibrg / ((pm + 1) * 2); > - > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT > - * 10), spi_freq); > - > - return &fsl->slave; > -} > - > -void spi_free_slave(struct spi_slave *slave) > +void spi_cs_activate(struct spi_slave *slave) > { > struct fsl_s
Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert Freescale ESPI driver to driver model
+ Simon Glass > -Original Message- > From: Chuanhua Han > Sent: 2019年6月21日 10:22 > To: w...@denx.de; Shengzhou Liu ; Ruchika Gupta > ; ja...@openedev.com; s...@chromium.org; > Prabhakar Kushwaha > Cc: u-boot@lists.denx.de; Chuanhua Han > Subject: [PATCH v4 2/5] dm: spi: Convert Freescale ESPI driver to driver model > > Modify the Freescale ESPI driver to support the driver model. > Also resolved the following problems: > > = WARNING == This board > does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no > dm conversion and v2019.07 for partially dm converted drivers. > Failure to update can lead to driver/board removal See > doc/driver-model/MIGRATION.txt for more info. > > = WARNING == This board > does not use CONFIG_DM_SPI_FLASH. Please update the board to use > CONFIG_SPI_FLASH before the v2019.07 release. > Failure to update by the deadline may result in board removal. > See doc/driver-model/MIGRATION.txt for more info. > > > Signed-off-by: Chuanhua Han > --- > Changes in v4: > - Update copyright information. > - Move the fsl_espi_platdata data structure to the > include/dm/platform_data/. > - Merge the contents of the fsl_espi_priv structure into the > fsl_spi_slave > structure. > - Implement the fsl_espi_set_speed function. > - Implement the fsl_espi_set_mode function. > - Implement the espi_release_bus function. > - Remove unwanted fsl_espi_bind functions. > - Implement the fsl_espi_child_pre_probe function as needed. > - Use #if CONFIG_IS_ENABLED(OF_CONTROL) > && !CONFIG_IS_ENABLED(OF_PLATDATA). > Changes in v3: > - Add a cover-letter for this patch set. > Changes in v2: > - The fsl_espi driver support both OF_CONTROL and PLATDATA. > > drivers/spi/fsl_espi.c | 444 > include/dm/platform_data/fsl_espi.h | 16 + > 2 files changed, 339 insertions(+), 121 deletions(-) create mode 100644 > include/dm/platform_data/fsl_espi.h > > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index > 7444ae1a06..849f65f0e6 100644 > --- a/drivers/spi/fsl_espi.c > +++ b/drivers/spi/fsl_espi.c > @@ -3,18 +3,25 @@ > * eSPI controller driver. > * > * Copyright 2010-2011 Freescale Semiconductor, Inc. > + * Copyright 2019 NXP > * Author: Mingkai Hu (mingkai...@freescale.com) > + * Chuanhua Han (chuanhua@nxp.com) > */ > > #include > - > #include > #include > #include > +#include > +#include > +#include > +#include > > struct fsl_spi_slave { > struct spi_slave slave; > ccsr_espi_t *espi; > + u32 speed_hz; > + unsigned int cs; > unsigned intdiv16; > unsigned intpm; > int tx_timeout; > @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s) > container_of(s, struct fsl_spi_slave, slave) > #define US_PER_SECOND100UL > > +/* default SCK frequency, unit: HZ */ > +#define FSL_ESPI_DEFAULT_SCK_FREQ 1000 > + > #define ESPI_MAX_CS_NUM 4 > #define ESPI_FIFO_WIDTH_BIT 32 > > @@ -62,116 +72,32 @@ struct fsl_spi_slave { > > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 > > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, > - unsigned int max_hz, unsigned int mode) > -{ > - struct fsl_spi_slave *fsl; > - sys_info_t sysinfo; > - unsigned long spibrg = 0; > - unsigned long spi_freq = 0; > - unsigned char pm = 0; > - > - if (!spi_cs_is_valid(bus, cs)) > - return NULL; > - > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs); > - if (!fsl) > - return NULL; > - > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); > - fsl->mode = mode; > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; > - > - /* Set eSPI BRG clock source */ > - get_sys_info(&sysinfo); > - spibrg = sysinfo.freq_systembus / 2; > - fsl->div16 = 0; > - if ((spibrg / max_hz) > 32) { > - fsl->div16 = ESPI_CSMODE_DIV16; > - pm = spibrg / (max_hz * 16 * 2); > - if (pm > 16) { > - pm = 16; > - debug("Requested speed is too low: %d Hz, %ld Hz " > - "is used.\n", max_hz, spibrg / (32 * 16)); > - } > - } else > - pm = spibrg / (max_hz * 2); > - if (pm) > - pm--; > - fsl->pm = pm; > - > - if (fsl->div16) > - spi_freq = spibrg / ((pm + 1) * 2 * 16); > - else > - spi_freq = spibrg / ((pm + 1) * 2); > - > - /* set tx_timeout to 10 times of one espi FIFO entry go out */ > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * > ESPI_FIFO_WIDTH_BIT > - * 10), s