Re: [U-Boot] BUG num banks 8 exceeds hardcoded limit 4
Hi Lukasz and Ramon. On Sun, 12 Aug 2018 at 13:21, Ramon Fried wrote: > > Adding Simon. > > On Sat, Aug 11, 2018 at 2:54 PM Lukasz Majewski wrote: > > > > Hi Anand, > > > > > Hi Lukasz / Minkyu, > > > > > > Today I wanted to test the latest u-boot on my Odroid-XU4 > > > and I landed onto this bug and it failed to boot up. > > > > > > include/configs/odroid.h:#define CONFIG_NR_DRAM_BANKS 8 > > > include/configs/odroid_xu3.h:#define CONFIG_NR_DRAM_BANKS 8 > > > > > > seem to the the issue. > > The issue is my new patch: > https://patchwork.ozlabs.org/patch/947431/ > Temporarily you adjust MEMORY_BANKS_MAX in common/fdt_support.c > I have a suggestion on how to fix it for all boards, waiting for Simon > to respond. > Thanks, > Ramon. > This issue is related to number of sub nodes in memory node. Odroid XU3 / XU4 https://github.com/u-boot/u-boot/blob/master/arch/arm/dts/exynos5422-odroidxu3.dts#L21-L31 But this can be fix by using mainline memory node. https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/exynos5422-odroid-core.dtsi#L17-L20 > > > > > > > > Are you sure that you ran the code recently? > > > > According to git blame: > > 973ae1e0858d3 (Przemyslaw Marczak 2015-02-17 14:50:26 +0100 22) > > #define CONFIG_NR_DRAM_BANKS 8 > > > > This change is quite old... > > > > Which u-boot version have you ran till now? > > I am using the mainline u-boot for now to test new feature. Best Regards -Anand ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] BUG num banks 8 exceeds hardcoded limit 4
Adding Simon. On Sat, Aug 11, 2018 at 2:54 PM Lukasz Majewski wrote: > > Hi Anand, > > > Hi Lukasz / Minkyu, > > > > Today I wanted to test the latest u-boot on my Odroid-XU4 > > and I landed onto this bug and it failed to boot up. > > > > include/configs/odroid.h:#define CONFIG_NR_DRAM_BANKS 8 > > include/configs/odroid_xu3.h:#define CONFIG_NR_DRAM_BANKS 8 > > > > seem to the the issue. The issue is my new patch: https://patchwork.ozlabs.org/patch/947431/ Temporarily you adjust MEMORY_BANKS_MAX in common/fdt_support.c I have a suggestion on how to fix it for all boards, waiting for Simon to respond. Thanks, Ramon. > > > > Are you sure that you ran the code recently? > > According to git blame: > 973ae1e0858d3 (Przemyslaw Marczak 2015-02-17 14:50:26 +0100 22) > #define CONFIG_NR_DRAM_BANKS 8 > > This change is quite old... > > Which u-boot version have you ran till now? > > > > > Well I have some local changes to enable MMC on u-boot and reset the > > mmc regulators on. > > which might not be related to this bug. > > > > U-Boot 2018.09-rc1-00165-ge966471562-dirty (Aug 09 2018 - 06:29:02 > > +) for ODROID-XU3/XU4/HC1 > > > > CPU: Exynos5422 @ 800 MHz > > Model: Odroid XU3 based on EXYNOS5422 > > Board: Odroid XU3 based on EXYNOS5422 > > Type: xu4 > > DRAM: 2 GiB > > LDO18@vdd_emmc_1V8: set 180 uV; enabling > > LDO3@vddq_mmc0: set 180 uV; enabling > > LDO13@vddq_mmc2: set 280 uV; enabling > > LDO19@vdd_sd: set 280 uV; enabling > > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 > > Loading Environment from MMC... Card did not respond to voltage > > select! *** Warning - No block device, using default environment > > > > Failed (-5) > > In:serial > > Out: serial > > Err: serial > > Net: No ethernet found. > > Hit any key to stop autoboot: 0 > > MMC Device 1 not found > > no mmc device at slot 1 > > Card did not respond to voltage select! > > switch to partitions #0, OK > > mmc2 is current device > > Scanning mmc 2:1... > > Found U-Boot script /boot.scr > > 3266 bytes read in 6 ms (531.3 KiB/s) > > ## Executing script at 5000 > > Found kernel image: zImage > > 57082 bytes read in 8 ms (6.8 MiB/s) > > Found ramdisk image. > > 6484525 bytes read in 425 ms (14.6 MiB/s) > > 6713264 bytes read in 441 ms (14.5 MiB/s) > > Kernel image @ 0x40007fc0 [ 0x00 - 0x666fb0 ] > > ## Loading init Ramdisk from Legacy Image at 4200 ... > >Image Name: uInitrd > >Image Type: ARM Linux RAMDisk Image (uncompressed) > >Data Size:6484461 Bytes = 6.2 MiB > >Load Address: > >Entry Point: > >Verifying Checksum ... OK > > ## Flattened Device Tree blob at 4080 > >Booting using the fdt blob at 0x4080 > >Loading Ramdisk to 4f9d, end 41ed ... OK > >Loading Device Tree to 4f9bf000, end 4f9cfef9 ... OK > > fdt_fixup_memory_banks: num banks 8 exceeds hardcoded limit 4. > > Recompile with higher MEMORY_BANKS_MAX? > > ERROR: arch-specific fdt fixup failed > > - must RESET the board to recover. > > > > FDT creation failed! hanging...### ERROR ### Please RESET the board > > ### > > > > Best Regards > > -Anand > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > ___ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] BUG num banks 8 exceeds hardcoded limit 4
Hi Anand, > Hi Lukasz / Minkyu, > > Today I wanted to test the latest u-boot on my Odroid-XU4 > and I landed onto this bug and it failed to boot up. > > include/configs/odroid.h:#define CONFIG_NR_DRAM_BANKS 8 > include/configs/odroid_xu3.h:#define CONFIG_NR_DRAM_BANKS 8 > > seem to the the issue. Are you sure that you ran the code recently? According to git blame: 973ae1e0858d3 (Przemyslaw Marczak 2015-02-17 14:50:26 +0100 22) #define CONFIG_NR_DRAM_BANKS 8 This change is quite old... Which u-boot version have you ran till now? > > Well I have some local changes to enable MMC on u-boot and reset the > mmc regulators on. > which might not be related to this bug. > > U-Boot 2018.09-rc1-00165-ge966471562-dirty (Aug 09 2018 - 06:29:02 > +) for ODROID-XU3/XU4/HC1 > > CPU: Exynos5422 @ 800 MHz > Model: Odroid XU3 based on EXYNOS5422 > Board: Odroid XU3 based on EXYNOS5422 > Type: xu4 > DRAM: 2 GiB > LDO18@vdd_emmc_1V8: set 180 uV; enabling > LDO3@vddq_mmc0: set 180 uV; enabling > LDO13@vddq_mmc2: set 280 uV; enabling > LDO19@vdd_sd: set 280 uV; enabling > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 > Loading Environment from MMC... Card did not respond to voltage > select! *** Warning - No block device, using default environment > > Failed (-5) > In:serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > MMC Device 1 not found > no mmc device at slot 1 > Card did not respond to voltage select! > switch to partitions #0, OK > mmc2 is current device > Scanning mmc 2:1... > Found U-Boot script /boot.scr > 3266 bytes read in 6 ms (531.3 KiB/s) > ## Executing script at 5000 > Found kernel image: zImage > 57082 bytes read in 8 ms (6.8 MiB/s) > Found ramdisk image. > 6484525 bytes read in 425 ms (14.6 MiB/s) > 6713264 bytes read in 441 ms (14.5 MiB/s) > Kernel image @ 0x40007fc0 [ 0x00 - 0x666fb0 ] > ## Loading init Ramdisk from Legacy Image at 4200 ... >Image Name: uInitrd >Image Type: ARM Linux RAMDisk Image (uncompressed) >Data Size:6484461 Bytes = 6.2 MiB >Load Address: >Entry Point: >Verifying Checksum ... OK > ## Flattened Device Tree blob at 4080 >Booting using the fdt blob at 0x4080 >Loading Ramdisk to 4f9d, end 41ed ... OK >Loading Device Tree to 4f9bf000, end 4f9cfef9 ... OK > fdt_fixup_memory_banks: num banks 8 exceeds hardcoded limit 4. > Recompile with higher MEMORY_BANKS_MAX? > ERROR: arch-specific fdt fixup failed > - must RESET the board to recover. > > FDT creation failed! hanging...### ERROR ### Please RESET the board > ### > > Best Regards > -Anand Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de pgpA3exzfrQhF.pgp Description: OpenPGP digital signature ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot