UPDATE: Downgrading to the firmware to 8.5.7 allowed me to input my code and get the additional frequencies.
On Mon, Jul 29, 2019 at 11:27 AM James Craig <james.cr...@ubnt.com> wrote: > (I tried to send to the WISPA list, but looks like I need to update my > email settings) > > Rick, > > If you SSH into the unit, could you share the output of: > > cat /etc/board.info | grep fcc > > What firmware are you using? > > Both LBE-5AC-23 and LBE-5AC-GEN2 (updated version) have certification for > UNII-1/2/3, but the non-GEN2 versions would require an unlock code to > enable the Revised UNII Grant. > -- On Tue, Jul 30, 2019 at 3:19 PM RickG <rgunder...@gmail.com> wrote: > James, I have attached the output you requested plus the support file and > a screen capture of the system tab. Please advise that you received this. > Thanks! > > On Tue, Jul 30, 2019 at 1:34 PM James Craig via Ubnt_users < > ubnt_users@wispa.org> wrote: > >> Rick, >> >> If you SSH into the unit, could you share the output of: >> >> cat /etc/board.info | grep fcc >> >> What firmware are you using? >> >> Both LBE-5AC-23 and LBE-5AC-GEN2 (updated version) have certification for >> UNII-1/2/3, but the non-GEN2 versions would require an unlock code to >> enable the Revised UNII Grant. >> >> >> >> On Mon, Jul 29, 2019 at 10:08 AM Roy <r.engehau...@gmail.com> wrote: >> >>> >>> >>> We use LiteBeam AC Gen 2 and LBE-5AC-23 successfully out to 3 miles. >>> YMMV. For .5 miles and less, we are starting to use Mikrotik 60Ghz >>> >>> Roy >>> >>> >>> >>> On 7/29/2019 5:44 AM, Phil Curnutt wrote: >>> >>> The original model needs the unlock code for the UNII, the newer, Gen2, >>> comes activated. They work fine for short shots 3/4 of mile or less: >>> anything longer move to the PowerBeams. The LBE's work much better then >>> the NBE's that have a funky antenna pattern. >>> >>> Phil >>> >>> On Sun, Jul 28, 2019 at 10:16 PM Roy <r.engehau...@gmail.com> wrote: >>> >>>> >>>> >>>> I just checked a LBE-5AC-23 and it has the "revised U-NII question. >>>> Its activated and I think all those channels are selectable. Software is >>>> version 8.5.12 >>>> >>>> Roy >>>> >>>> On 7/28/2019 8:56 PM, RickG wrote: >>>> >>>> I dont get that option on these. >>>> >>>> On Sun, Jul 28, 2019 at 1:17 PM Mimbres Communications < >>>> mim...@sw-ei.com> wrote: >>>> >>>>> Any chance you forgot to activate the revised U-NII rules? >>>>> [image: lbe-unii-rules.PNG] >>>>> >>>>> On Sun, Jul 28, 2019 at 10:28 AM RickG <rgunder...@gmail.com> wrote: >>>>> >>>>>> Anyone here know what's the deal with the LBE-5AC units? I've got >>>>>> several that will not select the UNII bands. I've tried upgrading the >>>>>> firmware. -RickG >>>>>> >>>>>> _______________________________________________ >>>>>> Ubnt_users mailing list >>>>>> Ubnt_users@wispa.org >>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042 >>>>> >>>>> _______________________________________________ >>>>> Ubnt_users mailing list >>>>> Ubnt_users@wispa.org >>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>> >>>> >>>> >>>> -- >>>> -RickG >>>> >>>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >> _______________________________________________ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > -- > -RickG > -- -RickG
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
