[Ubnt_users] why limit the mcs rate ?

We have a 2.4 network we recently acquired - in going through some of the radios - we find several of them have Max TX Rate locked in at MCS 1 - auto is unchecked. I've never seen a configuration like this nor have I ever heard of it being done. Why would someone do this? What possible

[Ubnt_users] Real world speeds on litebeam

What kind of real world speeds are people seeing on litebeam? How well do they perform in an area that has a lot of interference? Thank you, Brett A Mansfield ___ Ubnt_users mailing list Ubnt_users@wispa.org

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

Last I checked they had moved out of the ubnt beta store and were available for general purchase in the ubnt online store - Original Message - From: Jay Weekley To: Ubiquiti Users Group Sent: Tuesday, July 18, 2017 10:30 AM Subject: Re: [Ubnt_users] Rocket 2AC Prism

Re: [Ubnt_users] 2nd request Fwd: wifi cell phone content blocked? Access Point generates insecure warnings

On the wireless tab there is a WDS enable box. Should this box be enabled for a typical house router/wifi/Access-Point? And would that cause this problem if it's not enabled? Jan V On 07/17/2017 05:33 PM, Jan Van Kort wrote: I'm not a website, wouldn't it be up to the user device to make

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

Maybe UBNT could come out with 6.05. That version number was skipped. 6.05 could just be a signed version of 6.04. You could then downgrade 6.06 to 6.05 and then to any unsigned versions On 7/18/2017 9:37 AM, Mitch wrote: > > We have 5 R2AC Prism's up and running > > we have to use

Re: [Ubnt_users] GPS Sync in AC Gen 2

Planning on testing this next week I Hope Mitch On 7/18/2017 10:44 AM, alex phillips wrote: Has anyone had any experience running GPS sync yet in UBNT Gen2 AC products? please share if you have information. thanks /*Alex Phillips*/ CEO and General Manager RBNS.net HighSpeedLink.net

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

We have 5 R2AC Prism's up and running we have to use 6.0.4 for any cpe to connect We will not use 6.0.6 due to truck roll to TFTP down grade Mitch On 7/18/2017 10:20 AM, ty...@wigi.us wrote: havent done any 2's yet. But for 5.8 it needs to be 6.0 or higher. Ive been using 6.0.4

[Ubnt_users] GPS Sync in AC Gen 2

Has anyone had any experience running GPS sync yet in UBNT Gen2 AC products? please share if you have information. thanks *Alex Phillips* CEO and General Manager RBNS.net HighSpeedLink.net *WISPA.org Board of Directors ** (2011-2017)* *WISPA President (2015-2017)* *540-908-3993*

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

These came from the Ubquiti Beta Store. You might contact Jeff Broadwick at CTI about availability. RickG wrote: > Where are you getting the R2AC Prisms? I'm having a hard time locating > them. > > On Tue, Jul 18, 2017 at 11:24 AM, RickG >

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

That's the way it's looking. Wasn't paying attention and thought I had loaded loaded the wrong firmware. It's a mix of Powerbeams and Nanostations/Locos. RickG wrote: > You may need both depending on your mix of CPE. > > On Tue, Jul 18, 2017 at 11:02 AM, Jay Weekley >

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

ok. Just read it correctly. Ricks right. xm firmware on any xm hardware. xw firmware on any xw hardware. You can see what it is under the system tab where you upload the firmware at. failsafe is it wont let you flash the wrong one on it. - Original Message - Subject: Re:

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

Where are you getting the R2AC Prisms? I'm having a hard time locating them. On Tue, Jul 18, 2017 at 11:24 AM, RickG wrote: > You may need both depending on your mix of CPE. > > On Tue, Jul 18, 2017 at 11:02 AM, Jay Weekley > wrote: > >> I'm

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

You may need both depending on your mix of CPE. On Tue, Jul 18, 2017 at 11:02 AM, Jay Weekley wrote: > I'm upgrading the firmware for some clients for compatibility with the > Rocket 2AC Prism. Do I need the XW.v.6.0.4 or XM.v.6.0.4 firmware > versions? >

Re: [Ubnt_users] Rocket 2AC Prism Firmware compatibility

havent done any 2's yet. But for 5.8 it needs to be 6.0 or higher. Ive been using 6.0.4 personally. - Original Message - Subject: [Ubnt_users] Rocket 2AC Prism Firmware compatibility From: "Jay Weekley" Date: 7/18/17 11:02 am To: "Ubiquiti Users

[Ubnt_users] Rocket 2AC Prism Firmware compatibility

I'm upgrading the firmware for some clients for compatibility with the Rocket 2AC Prism. Do I need the XW.v.6.0.4 or XM.v.6.0.4 firmware versions? ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users