Re: [Ubnt_users] Interesting RP5AC Gen2 crashing problem...

[RickG]

The good news is it's up! Wonder if it's false-positives? What did a scan
look like?

On Sat, Oct 28, 2017 at 12:48 AM,  wrote:

> Switched it to a non-dfs freq and it was golden.
>
> Totally weird.
>
> On Oct 27, 2017, at 21:36, RickG  wrote:
>
> Strange. Did you try another frequency?
>
> On Sat, Oct 28, 2017 at 12:29 AM,  wrote:
>
>> Had it happen on both an old rev that was like 3-4 revs behind and the
>> current XC 8.4.2
>>
>> On Oct 27, 2017, at 21:22, RickG  wrote:
>>
>> Which firmware?
>>
>>
>> On Sat, Oct 28, 2017 at 12:14 AM,  wrote:
>>
>>> Ran across a weird problem today. I've been running a RP5AC Gen2
>>> (current firmware) radio on 120 sector for about the last 6 months on freq
>>> 5300 Mhz. Its been working great. Until today.
>>>
>>> The unit started crashing about every 4 minutes today. I thought it was
>>> a bad radio so i swapped it with a spare i had of the same model (3-4 revs
>>> behind in firmware) and it did the same thing. Every 4 minutes or so, it
>>> would crash.
>>>
>>> This sounded like a power problem to me so i replaced all the ends on
>>> thw cables and swapped the Netonix to a UBNT injector. Same problem.
>>>
>>> So i then move the power injector up to the roof and hook it up to the
>>> radio. All 7 clients connect, comes to the 4 minute point and poof, it
>>> crashes.
>>>
>>> Then i decided to unhook the GPS and both chain 0 and 1 pigtails and the
>>> radio is fine, doesn't crash at all.
>>>
>>> I then hook the sector and GPS back up to the radio and switch to a
>>> non-DFS channel and all is good.
>>>
>>> Crash reports sent to UBNT.
>>>
>>> WTF?
>>>
>>> -Mike
>>>
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>
>>
>>
>> --
>> -RickG
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> --
> -RickG
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
-RickG
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Interesting RP5AC Gen2 crashing problem...

[mike . lyon]

Switched it to a non-dfs freq and it was golden.

Totally weird.

> On Oct 27, 2017, at 21:36, RickG  wrote:
> 
> Strange. Did you try another frequency?
> 
>> On Sat, Oct 28, 2017 at 12:29 AM,  wrote:
>> Had it happen on both an old rev that was like 3-4 revs behind and the 
>> current XC 8.4.2
>> 
>>> On Oct 27, 2017, at 21:22, RickG  wrote:
>>> 
>>> Which firmware?
>>> 
>>> 
 On Sat, Oct 28, 2017 at 12:14 AM,   wrote:
 Ran across a weird problem today. I've been running a RP5AC Gen2 (current 
 firmware) radio on 120 sector for about the last 6 months on freq 5300 
 Mhz. Its been working great. Until today.
 
 The unit started crashing about every 4 minutes today. I thought it was a 
 bad radio so i swapped it with a spare i had of the same model (3-4 revs 
 behind in firmware) and it did the same thing. Every 4 minutes or so, it 
 would crash.
 
 This sounded like a power problem to me so i replaced all the ends on thw 
 cables and swapped the Netonix to a UBNT injector. Same problem.
 
 So i then move the power injector up to the roof and hook it up to the 
 radio. All 7 clients connect, comes to the 4 minute point and poof, it 
 crashes.
 
 Then i decided to unhook the GPS and both chain 0 and 1 pigtails and the 
 radio is fine, doesn't crash at all.
 
 I then hook the sector and GPS back up to the radio and switch to a 
 non-DFS channel and all is good.
 
 Crash reports sent to UBNT.
 
 WTF?
 
 -Mike
 
 
 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users
>>> 
>>> 
>>> 
>>> -- 
>>> -RickG
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>> 
> 
> 
> 
> -- 
> -RickG
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Interesting RP5AC Gen2 crashing problem...

[RickG]

Strange. Did you try another frequency?

On Sat, Oct 28, 2017 at 12:29 AM,  wrote:

> Had it happen on both an old rev that was like 3-4 revs behind and the
> current XC 8.4.2
>
> On Oct 27, 2017, at 21:22, RickG  wrote:
>
> Which firmware?
>
>
> On Sat, Oct 28, 2017 at 12:14 AM,  wrote:
>
>> Ran across a weird problem today. I've been running a RP5AC Gen2 (current
>> firmware) radio on 120 sector for about the last 6 months on freq 5300 Mhz.
>> Its been working great. Until today.
>>
>> The unit started crashing about every 4 minutes today. I thought it was a
>> bad radio so i swapped it with a spare i had of the same model (3-4 revs
>> behind in firmware) and it did the same thing. Every 4 minutes or so, it
>> would crash.
>>
>> This sounded like a power problem to me so i replaced all the ends on thw
>> cables and swapped the Netonix to a UBNT injector. Same problem.
>>
>> So i then move the power injector up to the roof and hook it up to the
>> radio. All 7 clients connect, comes to the 4 minute point and poof, it
>> crashes.
>>
>> Then i decided to unhook the GPS and both chain 0 and 1 pigtails and the
>> radio is fine, doesn't crash at all.
>>
>> I then hook the sector and GPS back up to the radio and switch to a
>> non-DFS channel and all is good.
>>
>> Crash reports sent to UBNT.
>>
>> WTF?
>>
>> -Mike
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>
>
>
> --
> -RickG
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
-RickG
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Interesting RP5AC Gen2 crashing problem...

[mike . lyon]

Had it happen on both an old rev that was like 3-4 revs behind and the current 
XC 8.4.2

> On Oct 27, 2017, at 21:22, RickG  wrote:
> 
> Which firmware?
> 
> 
>> On Sat, Oct 28, 2017 at 12:14 AM,  wrote:
>> Ran across a weird problem today. I've been running a RP5AC Gen2 (current 
>> firmware) radio on 120 sector for about the last 6 months on freq 5300 Mhz. 
>> Its been working great. Until today.
>> 
>> The unit started crashing about every 4 minutes today. I thought it was a 
>> bad radio so i swapped it with a spare i had of the same model (3-4 revs 
>> behind in firmware) and it did the same thing. Every 4 minutes or so, it 
>> would crash.
>> 
>> This sounded like a power problem to me so i replaced all the ends on thw 
>> cables and swapped the Netonix to a UBNT injector. Same problem.
>> 
>> So i then move the power injector up to the roof and hook it up to the 
>> radio. All 7 clients connect, comes to the 4 minute point and poof, it 
>> crashes.
>> 
>> Then i decided to unhook the GPS and both chain 0 and 1 pigtails and the 
>> radio is fine, doesn't crash at all.
>> 
>> I then hook the sector and GPS back up to the radio and switch to a non-DFS 
>> channel and all is good.
>> 
>> Crash reports sent to UBNT.
>> 
>> WTF?
>> 
>> -Mike
>> 
>> 
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
> 
> 
> 
> -- 
> -RickG
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Interesting RP5AC Gen2 crashing problem...

[RickG]

Which firmware?


On Sat, Oct 28, 2017 at 12:14 AM,  wrote:

> Ran across a weird problem today. I've been running a RP5AC Gen2 (current
> firmware) radio on 120 sector for about the last 6 months on freq 5300 Mhz.
> Its been working great. Until today.
>
> The unit started crashing about every 4 minutes today. I thought it was a
> bad radio so i swapped it with a spare i had of the same model (3-4 revs
> behind in firmware) and it did the same thing. Every 4 minutes or so, it
> would crash.
>
> This sounded like a power problem to me so i replaced all the ends on thw
> cables and swapped the Netonix to a UBNT injector. Same problem.
>
> So i then move the power injector up to the roof and hook it up to the
> radio. All 7 clients connect, comes to the 4 minute point and poof, it
> crashes.
>
> Then i decided to unhook the GPS and both chain 0 and 1 pigtails and the
> radio is fine, doesn't crash at all.
>
> I then hook the sector and GPS back up to the radio and switch to a
> non-DFS channel and all is good.
>
> Crash reports sent to UBNT.
>
> WTF?
>
> -Mike
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>



-- 
-RickG
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users