Thanks for pointing it. I'll check this out asap.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1452858
Title:
Screen lit off on iMac 12,2 after a while
To manage notifications about this bug go
Ok, I'm checking it in.
It triggers today too after less than 15min. We have summer heat. It's 30°C
here near the Mac.
Thank you very much for your attention ! :)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Finally, i reproduce it with `4.1.0-040100rc2-generic`.
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1452858
Title:
Screen lit
I don't know why it took so much time to trigger. I did not a
particularily long session : less than 1 hour.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1452858
Title:
Screen lit off on iMac 12,2
I'll check this out. Thanks !!
Note that i never reproduced this on Mac OS X. This is why i think it's
not an hardware issue.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1452858
Title:
Screen
Public bug reported:
Hello,
I'm running Ubuntu on an iMac 12,2 since november 2012. From time to
time and more and more frequently the screen lit off. The only way i can
get it on is to suspend/resume. But then, it lit off soon. I suspect
some heating. Actually, the output of the cooling system
*** This bug is a duplicate of bug 1452858 ***
https://bugs.launchpad.net/bugs/1452858
Public bug reported:
Hello,
I'm running Ubuntu on an iMac 12,2 since november 2012. From time to
time and more and more frequently the screen lit off. The only way i can
get it on is to suspend/resume.
*** This bug is a duplicate of bug 91389 ***
https://bugs.launchpad.net/bugs/91389
Confirmed in Ubuntu GNOME 14.10
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/671024
Title:
can't connect to
I confirm this bug with saucy.
$ apt-cache policy software-center
software-center:
Installed: 13.08-0ubuntu1
Candidate: 13.08-0ubuntu1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1163886
Hi,
I confirm this bug when building a git tree :
-8---
root@test1:/usr/src/linux-head# apt-cache policy kernel-package
kernel-package:
Installé : 12.036+nmu3
Candidat : 12.036+nmu3
Table de version :
*** 12.036+nmu3 0
500 http://fr.archive.ubuntu.com/ubuntu/
Hi,
Dustin, could you upload a maverick build with updated version ?
Regards,
Étienne
--
qemu-kvm should Build-Depends on libvdeplug2-dev (KVM vde2 support not working)
https://bugs.launchpad.net/bugs/253230
You received this bug notification because you are a member of Ubuntu
Server Team,
Hi,
Actually, would it be possible to ship a qemu-kvm-vde package in
universe ?
Regards,
Étienne
--
qemu-kvm should Build-Depends on libvdeplug2-dev (KVM vde2 support not working)
https://bugs.launchpad.net/bugs/253230
You received this bug notification because you are a member of Ubuntu
Hi,
Dustin, could you upload a maverick build with updated version ?
Regards,
Étienne
--
qemu-kvm should Build-Depends on libvdeplug2-dev (KVM vde2 support not working)
https://bugs.launchpad.net/bugs/253230
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hi,
Actually, would it be possible to ship a qemu-kvm-vde package in
universe ?
Regards,
Étienne
--
qemu-kvm should Build-Depends on libvdeplug2-dev (KVM vde2 support not working)
https://bugs.launchpad.net/bugs/253230
You received this bug notification because you are a member of Ubuntu
Bugs,
Hi,
I guess that bug is fixed in 0.7. GSane needs to reload all SANE Options
when SANE requires this. I don't remember how far this is possible in
0.6. Maybe not that much. The issue is reloading SANE option may lead to
reloading option widgets…
Anyway, 0.7 do it the right way, 0.7 and 0.6 are
http://git.gnome.org/browse/gnome-
scan/commit/?id=b45747f047fb5069b621ddb9a01b7306e899f543
--
When I launch a preview with gnome-scan it crash at the end of the process
https://bugs.launchpad.net/bugs/497098
You received this bug notification because you are a member of Ubuntu
Bugs, which is
SANE 1.0.20 is known to make option reloading mandatory.
--
When I launch a preview with gnome-scan it crash at the end of the process
https://bugs.launchpad.net/bugs/497098
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Le lundi 26 juillet 2010 à 14:01 +, Nestor Milyaev a écrit :
I chwecked just now - the camera actually works, no need for the
firmware tools. Thanks!!!
That does not say that the bug itself was resolved, but hey who needs
the firmware tools if the camera works anyway?
Can you please
Hi,
I confirm that NetworkManager 0,8-0ubuntu3 does not like IPv6 and Wifi,
using 10.04.
Wired connection is OK with both IPv4 and IPv6.
But NM does attach wifi at all. Even when ignoring IPv6 in the conf
dialog :/
It works like a charm on OS X.
--
IPv6 causes wireless to
Hi,
I upgraded to 0.8.1rc from Network Manager team, and NM still refuses to
attach when IPv6 is advertised by the router :/.
Regards,
Étienne
--
IPv6 causes wireless to disconnect/reconnect often
https://bugs.launchpad.net/bugs/158481
You received this bug notification because you are a
Hi,
Could you test source deb from revu, not PPA, since i can't upload to
PPA due to bug #378790 .
http://revu.ubuntuwire.org/p/gnome-scan
Regards,
Étienne.
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification because you are a member of
Please update to 0.6.2 from my PPA
** Changed in: gnomescan (Ubuntu)
Status: New = Invalid
--
flegita crashes with a vega usb camera and a fujitsu S300
https://bugs.launchpad.net/bugs/373803
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Hi,
xkeyboard-config dropped the workaround of a kernel bug fixed in
2.6.18.3. Looks like jaunty kernel is not uptodate for fixing this bug.
The bug is actually a kernel bug. See
http://bugs.freedesktop.org/show_bug.cgi?id=9095 .
Regards,
Étienne.
** Bug watch added: freedesktop.org Bugzilla
Hi,
Please upgrade to 0.6.2 available at my PPA
Regards,
Étienne
** Changed in: gnomescan (Ubuntu)
Status: New = Invalid
--
flegita does not complete scan from ADF
https://bugs.launchpad.net/bugs/367979
You received this bug notification because you are a member of Ubuntu
Bugs, which
Hi,
In other words, your problem is fixed?
Not tested.
Étienne.
--
E Ultreïa !
** Changed in: linux (Ubuntu)
Status: Incomplete = In Progress
--
iMac G5 Thermal Fan Support
https://bugs.launchpad.net/bugs/34723
You received this bug notification because you are a member of Ubuntu
Hi
Well, the patch is included upstream for a while now :
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=80ff974dba8cc432ab81676fc09d3c357cb11276
Regards
Étienne
--
E Ultreïa !
--
iMac G5 Thermal Fan Support
https://bugs.launchpad.net/bugs/34723
You received this
Hi,
Comment out the v4l line in /etc/sane.d/dll.conf
Regards,
Étienne.
--
GnomeScan doesn't detect Scanner
https://bugs.launchpad.net/bugs/321292
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Changed in: gnomescan (Ubuntu)
Status: Confirmed = Fix Released
--
flegita doesn't show device-choice-dialog and backfires
https://bugs.launchpad.net/bugs/217753
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Hi,
I confirm the bug is fixed on MacBook White 4,1 (GMA 965)
Regards,
Étienne.
--
E Ultreïa !
--
[i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty)
https://bugs.launchpad.net/bugs/304871
You received this bug notification because you are a member of Ubuntu
Bugs,
Hi,
Please use 0.6.2
Thx
Étienne.
** Changed in: gnomescan (Ubuntu)
Status: New = Invalid
--
gnomescan Segmentation fault on startup when encountering a DVB device
https://bugs.launchpad.net/bugs/355011
You received this bug notification because you are a member of Ubuntu
Bugs, which
Please use 0.6
Regards,
** Changed in: gnomescan (Ubuntu)
Status: New = Invalid
--
flegita crashed with SIGSEGV in gtk_tree_model_get_valist()
https://bugs.launchpad.net/bugs/287175
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Hi,
So +1 for trying out 2.6.3 :-)
Me too. I also hits freeze on GMA965 on last intel-GPU MacBook. Looks
like the problem does not touch only old hardwares.
Regards,
Étienne
--
E Ultreïa !
--
[i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty)
Hi,
I submitted updated packages http://revu.ubuntuwire.com/p/gnome-scan
but didn't got any feedback from motu. Wish i'm not too late.
Étienne
--
E Ultreïa !
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification because you are a member of
Public bug reported:
Hi,
Mergefs is a tiny python-fuse file system that merge several directory
into one allowing readwrite. Unlike other unionfs, it does the job
recursively and can handle more than two directories. It is also a good
example of python-fuse file system.
Regards,
Étienne.
**
Hi,
I uploaded packages to REVU.
Étienne.
** Changed in: ubuntu
Status: New = In Progress
--
RFP mergefs
https://bugs.launchpad.net/bugs/326845
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hi,
Please upgrade ot 0.6.1 available on my PPA. Also, please post debug
output ($ flegita log)
Regards,
Étienne
--
Gnome Scan fails to find USB scanner with 'The scan backend returned the
following error: Invalid argument'
https://bugs.launchpad.net/bugs/312097
You received this bug
Hi,
Can you give me gdb output.
Run gdb flegita then
- type 'r' to start debugging
- Once it has crashed, type 'bt' to print debug backtrace
- type 'l' to print the code where it fails
- type 'info locals' to print local variables
- type 'info args' to print arguments.
- type 'up' to go
Hi,
Please upgrade to 0.6.1 available in my PPA.
Regards,
Étienne.
--
Segfault on start
https://bugs.launchpad.net/bugs/138280
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Anyway, please upgrade to 0.6 which is maintained. See my PPA for
packages
Étienne.
** Changed in: gnomescan (Ubuntu)
Status: Confirmed = Invalid
--
gnomescan (flegita) segfaults when logitech quickcam connected
https://bugs.launchpad.net/bugs/173575
You received this bug notification
Hi,
In /etc/sane.d/dll.conf , comment out the v4l line to avoid loading
libsane-v4l.so (thus reducing probe and avoid such crash). Gnome Scan
0.6 ignore such device, 0.7 should support them (not tested).
Regards,
Étienne.
--
E Ultreïa !
--
gnomescan (flegita) segfaults when logitech quickcam
Hi,
It is on my PPA : https://launchpad.net/~bersace/+archive
Regards,
Étienne
--
E Ultreïa !
--
Gnome scan utility crashes the system
https://bugs.launchpad.net/bugs/315801
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Please use 0.6.1
--
E Ultreïa !
--
Gnome scan utility crashes the system
https://bugs.launchpad.net/bugs/315801
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Hi,
Yes, webcam cause issue in 0.4. 0.6 ignore them. 0.8 should support them
properly. Please update to 0.8.
Regards,
Étienne.
--
flegita doesn't show device-choice-dialog and backfires
https://bugs.launchpad.net/bugs/217753
You received this bug notification because you are a member of Ubuntu
Hi,
Yes, webcam cause issue in 0.4. 0.6 ignore them. 0.8 should support them
properly. Please update to 0.6.1.
Regards,
Étienne.
--
flegita doesn't show device-choice-dialog and backfires
https://bugs.launchpad.net/bugs/217753
You received this bug notification because you are a member of
0.6.1 is out.
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Note that 0.6.1 require GEGL 0.0.21 SVN due to a bug in GEGL that makes
images black.
Étienne.
--
E Ultreïa !
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Changed in: gnomescan (Ubuntu)
Status: Confirmed = Fix Released
--
Gnomescan detects my HP scanner only when ran as superuser
https://bugs.launchpad.net/bugs/214531
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Hi,
Did you use de .deb ? The firmware needs to be extracted from the
AppleUSBVideoSupport driver file and patched by ift-extract.
Étienne.
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of
This bug is obsolete because Ubuntu provide an obsolete version of GNOME
Scan. I wont provide support for this version. So either Ubuntu provide
a patch along its package or switch to 0.6.
Étienne.
--
flegita : Program received signal SIGSEGV, Segmentation fault.
** Attachment added: lspci_vvnn
http://launchpadlibrarian.net/18644020/lspci_vvnn
--
GDM 2.20 does not use hal keyboard config
https://bugs.launchpad.net/bugs/281871
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: Xorg.0.log
http://launchpadlibrarian.net/18644024/Xorg.0.log
--
GDM 2.20 does not use hal keyboard config
https://bugs.launchpad.net/bugs/281871
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
No xorg.conf.
--
GDM 2.20 does not use hal keyboard config
https://bugs.launchpad.net/bugs/281871
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Right,
If i reset, gnome also uses PC 105 US keymap, so this bug may be xorg.
Cordialement,
Étienne.
--
GDM 2.20 does not use hal keyboard config
https://bugs.launchpad.net/bugs/281871
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: gdm
Hi,
In GDM, the keyboard layout is still PC 105 US, while i'm on a macbook
with french keyboard. All is fine in GNOME, without touching
configuration through keyboard capplet.
I guess this is due to the fact that Xorg don't use xorg.conf anymore.
Hi,
The patch has been merged upstream in 2.6.26.
Étienne.
--
iMac G5 Thermal Fan Support
https://bugs.launchpad.net/bugs/34723
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Hi,
Can you send me the debug output of flegita command in the terminal.
flegita flegita.log should do the trick.
Regards,
Étienne.
--
E Ultreïa !
--
Wrong size of scanned area when choosing A4
https://bugs.launchpad.net/bugs/243034
You received this bug notification because you are a member
Sébastien, you are my hero :)
It was a typo in my /etc/hosts !
Thanks.
I still wonder why ephy didn't have this issue.
Étienne.
--
Freeze while requesting cups printer details
https://bugs.launchpad.net/bugs/241728
You received this bug notification because you are a member of Ubuntu
Bugs,
** Changed in: cupsys (Ubuntu)
Status: New = Invalid
--
Freeze while requesting cups printer details
https://bugs.launchpad.net/bugs/241728
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hi,
It works in Epiphany (gtk but also gecko ?) and OpenOffice.org. I don't
understand what could have changed in cifrado and evince since hardy
release to provoke this bug.
Regards,
Étienne.
--
E Ultreïa !
--
Freeze while requesting cups printer details
https://bugs.launchpad.net/bugs/241728
Public bug reported:
Binary package hint: hplip
Hi,
Using evince or some other gtkprint application ( e.g.:
http://cifrado.free.fr/ ), the application freeze once i launch the
print operation (print dialog). Here is the output from gdb (i Ctrl+C
the programm to get the backtrace after launching
Hi,
GNOME Scan 0.4.1 is in universe while GNOME Scan 0.6 is in my PPA. Looks
like ubuntu packagers are repackagin gnome-scan. Let me upload it to
revu.
Regards,
Étienne.
--
E Ultreïa !
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification
Hi,
GNOME Scan 0.X is not production ready. You should disable automatic
color enhancement in order to save CPU. Anyway, 0.6 is far better than
0.4.
Regards,
Étienne.
--
E Ultreïa !
--
Please update to latest 0.6
https://bugs.launchpad.net/bugs/193818
You received this bug notification
Please use 0.6.
--
Gnomescan detects my HP scanner only when ran as superuser
https://bugs.launchpad.net/bugs/214531
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Hi,
The automatic color enhancement process is far from optimal and produce
such noise on white area. Don't worry, the photo itself is actually
enhanced, and that's enough ;).
This is actually a GEGL bug, stress operation is known to be quite
experimental.
Étienne.
** Changed in: gnomescan
Ok, already fixed in newer version.
** Changed in: gnomescan (Ubuntu)
Status: New = Invalid
** Changed in: sane-backends (Ubuntu)
Status: New = Invalid
--
Gnomescan detects my HP scanner only when ran as superuser
https://bugs.launchpad.net/bugs/214531
You received this bug
Hi,
This bug is about firmware loading, not ift compilation. Please don't
spam this bug. Open a question or ask on a forum.
Regards,
Étienne.
--
E Ultreïa !
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you
Hi,
I think that is wrong.
Yes, this is completely wrong. Things goes exactly in the reverse
orde :)
the newer versions of uvcvideo require another
tool to load firmware (it was being patched before).
Laurent Pinchard, linux-uvc author, never accepted the isight patch
including kernel-space
Hi,
Still not working !
Sorry, but such sentence does not help fixing bugs … Can you be more
expressive ?
Étienne.
--
E Ultreïa !
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of Ubuntu
Hi,
Please update to 1.2 which is based on HAL rather than udev.
Regards,
Étienne.
--
E Ultreïa !
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Hi,
Did you try XSane. If xsane fails too, this is a hplip/sane
configuration problem. Check permission of device file, policy kit, etc.
Regards,
Étienne.
** Also affects: hplip (Ubuntu)
Importance: Undecided
Status: New
** Also affects: sane-backends (Ubuntu)
Importance:
Hi,
I'm the HumanList theme writer. This bug appear unexpectedly.
gdmthemetester is also concerned. Where to find debug info ?
Regards,
Étienne.
--
gdm hangs after theme upgrade and reboot
https://bugs.launchpad.net/bugs/210538
You received this bug notification because you are a member of
Hrm,
So, gdmthemetester console HumanList hang, but gdmthemetester console .
in HumanList dir works. How to fix that ???
Étienne.
--
gdm hangs after theme upgrade and reboot
https://bugs.launchpad.net/bugs/210538
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Changed in: linux (Ubuntu)
Status: New = Fix Released
--
Xorg fails to configure 945 and no USB keyboard
https://bugs.launchpad.net/bugs/201421
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hi,
Well, actually this bug is fixed for ift but not for ubuntu. I found
Ubuntu quite slow at integrating software :(.
Regards,
Étienne.
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of
Hi,
The bug is not in linux-ubuntu-modules but rather in ubuntu-meta, not
including ift. Please include IFT to get straight forward support for
iSight.
Regards,
Étienne.
** Changed in: ubuntu-meta (Ubuntu)
Sourcepackagename: linux-ubuntu-modules-2.6.24 = ubuntu-meta
--
uvcvideo: iSight
** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu)
Status: Triaged = Fix Released
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Hi,
Are you sure you have /lib/firmware/isight.fw ? The debs fails silently
if you mispell the path.
Regards,
Étienne.
--
Alléluia !
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of Ubuntu
Hi everyone,
I'm sorry not to have answered question earlier. I've been busy
releasing GNOME Scan 0.6 and more. I setted up a git repos with
Gitorious : http://gitorious.org/projects/isight-firmware-tools . Yes, i
don't use bzr, git rocks so much i drop bzr.
I'm thinking at using a HAL callout
Hi,
Uploaded 1.2 with HAL callout :D
Regards,
Étienne.
--
uvcvideo: iSight firmware loading does not work
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Ave,
/usr/share/hal/fdi/preprobe/10osvendor/20-libsane.fdi is outdated,
particularily, it doesn't include SANE backend. This is painful since
HAL-scanner needs this field.
SANE CVS has a fullfeatured fdi generator, which provide enoughf
information.
Regards,
Étienne.
**
Ooops,
The original is also incompleted :(
--
Outdated libsane.fdi
https://bugs.launchpad.net/bugs/202180
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Changed in: sane-backends (Ubuntu)
Status: New = Invalid
--
Outdated libsane.fdi
https://bugs.launchpad.net/bugs/202180
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Hi,
Running Ubuntu hardy on MacBook 1,1 : intel GMA 945. Alpha 6 worked
fine. Upgrading after broke the system a lot. First, Xorg fails to get
up with errors :
GARTInit: Unable to open /dev/agpgart (No such file or directory)
...
DRIScreenInit failed
...
Coundn't allocate
Hi,
And please use debianisation from my PPA
( https://launchpad.net/~bersace/+archive ) rather than just uupdate
since the gnome-scan is a complete rewrite of gnomescan.
Ross Burton is including GNOME Scan in debian, based on my
debianization, so you might get double checked debianization from
Hi,
0.4.1 is obsolete, i'm currently releasing 0.6 along Gnome 2.22. You can
find packages at my PPA.
Étienne.
** Changed in: gnomescan (Ubuntu)
Status: New = Invalid
--
flegita crashed with SIGSEGV in g_value_array_copy()
https://bugs.launchpad.net/bugs/198921
You received this bug
Hi,
Use Alt+Middle Clic to resize from anywhere in the window. In Unix,
windows manager does not draw inside the window, only outside (border,
title, etc.). So only window with status bar have the resize handle at
bottom.
Regards,
Étienne.
--
E Ultreïa !
--
Window Resize Difficult (Window
Hi,
Gnome Scan 0.6 will be in time for Gnome 2.22. I just have to fix one
bug and test a bit the gimp plugin. GEGL 0.0.16 and BABL 0.0.20 will be
released as well. Packages are in my ppa :
http://launchpad.net/~bersace/+archive.
Do you plan to upgrade to 0.6 including providing GEGL and BABL
Hi,
debs are availables at http://launchpad.net/~bersace/+archive . Note
that' gnome-scan 0.X is alpha.
Regards,
Étienne.
--
Please update to latest version (0.5.4)
https://bugs.launchpad.net/bugs/193818
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
Did you read the howto at http://bersace03.free.fr/ift ?
Étienne.
--
E Ultreïa !
--
iSight doesn't work in Hardy Kernels
https://bugs.launchpad.net/bugs/185634
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
I confirm this bug. Cant' remember wether i used the alternate hardy or
upgrade from gutsy /o\
--
Hardy wont boot with the kernel 2.6.24 in ibook g4
https://bugs.launchpad.net/bugs/183338
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
Public bug reported:
Binary package hint: linux-source-2.6.22
Hi,
Upstream linux-uvc now include proper built-in iSight support. Please
drop isight_usb in favor of linux-uvc. Built-in iSight needs firmware
loading, this is handled in userspace by isight-firmware-tools. See
Hi,
Note that i wish gnome-scan 0.6 to land in hardy. gnome-scan 0.6 is
planned for end winter. I provide updated packages for gnome-scan and
depencies at my PPA. Note the change in the name gnomescan become gnome-
scan.
Regards,
Étienne.
--
Sponsor gnomescan_0.4.1-0ubuntu4
Hi,
I'm talking about iMac G5 **rev C** aka iMac G5 iSight based on
PowerMac12,1 motherboard rather than PowerMac8,1. I wrote the driver
windfarm_pm121 and send the patch to linuxppx-dev.
http://ozlabs.org/pipermail/linuxppc-dev/2007-December/047641.html and
following mails. I do own one of these
Hi,
There is proper userspace software for extraction and loading of isight
firmware on both intel powerpc boxes at http://bersace03.free.fr/ift/ .
There is also a cleaner patch against linux-uvc driver. Ubuntu should
not provide two UVC drivers, but rather UVC driver !!!
Regards,
Étienne.
--
Where does isight_usb come from ? isight is a UVC device and must be
supported by UVC driver !
--
MacBook iSight (isight_usb) reports 640x480, but fails to work at that
resolution
https://bugs.launchpad.net/bugs/105638
You received this bug notification because you are a member of Ubuntu
Bugs,
Hi,
Updated patch and tools for cleaner support of iSight on both powerpc
and mactel boxes are available at http://bersace03.free.fr/ift . This
patch builds on 2.6.24. Note the use of userspace tools to extract and
load the firmware rather that loading AppleUSBVideoSupport driver into
the kernel
Hi,
Using latest radeon driver from Tuomod Volden's PPA on X600 XT (RV380),
it works fine. I do have some freeze on gutsy while resizing nome-
terminal.
Regards,
Étienne.
--
random system freeze when desktop-effects activated with X300 (X600 and X700
too?)
Hi,
This patch seems broken for 2.6.24 kernels. Needs to be updated to r148.
However, i still have the No valid chain found for iSight 0x8300
(first built-in iSight on iMac G5 iSight ppc64).
Regards,
Étienne.
** Attachment added: isight-against-r148.patch
Updated patch (drop debugging, and few fixes)
Étienne.
** Attachment added: Windfarm PowerMac 12,1 driver
http://launchpadlibrarian.net/10756479/windfarm-pm121.patch
--
iMac G5 Thermal Fan Support
https://bugs.launchpad.net/bugs/34723
You received this bug notification because you are a
Hi,
We hunt the bug and it's now fixed in git version of radeon driver.
Please upgrade at least your PPA :).
Regards,
Étienne.
** Changed in: xserver-xorg-video-ati (Ubuntu)
Status: New = Fix Committed
--
Uses external VGA port as main screen on iMac G5 rev C - ATI X600
1 - 100 of 259 matches
Mail list logo