Public bug reported:
The machine is still fully functioning but laptop screen is blank.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xserver-xorg-video-amdgpu 1.1.0-1
ProcVersionSignature: Ubuntu 4.4.0-36.55-generic 4.4.16
Uname: Linux 4.4.0-36-generic x86_64
ApportVersion: 2.20.1-0ubunt
** Attachment added: "as asked for in suspension report instructions"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520978/+attachment/4527259/+files/wakeup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launc
** Attachment added: "lspci-vnvn.log as asked for in report instructions"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520978/+attachment/4527253/+files/lspci-vnvn.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https:
** Attachment added: "dmesg extract from just before to just after 'sudo
pm-suspend' call"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520978/+attachment/4527252/+files/suspend.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
nov 29 20:11:27 stinky kernel: sd 2:0:1:0: [sda] Stopping disk
nov 29 20:11:27 stinky kernel: tpm_inf_pnp 00:01: Error (38) sending savestate
before suspend
nov 29 20:11:27 stinky kernel: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x1e0
returns 38
nov 29 20:11:27 stinky kernel
** Attachment added: "dmesg log (mutter-WARNING messages filtered out)"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1520978/+attachment/4527254/+files/dmesg.log
** Summary changed:
- Suspend fails with error code 38
+ Suspend fails with error code 38 on Macbook 1st generation Intel C
Public bug reported:
Recently the service identi.ca has changed software altogether, from
StatusNet to Pump.io
The federated community using the StatusNet software are still alive and
well and not centralised around identi.ca (anymore) - so instead of
using the gwibber-service-identica, Online Ac
*** This bug is a duplicate of bug 1087969 ***
https://bugs.launchpad.net/bugs/1087969
** This bug has been marked a duplicate of bug 1087969
Touchpad settings in Ubuntu 13.04 do not allow horizontal edge scrolling.
--
You received this bug notification because you are a member of Ubuntu
This affects my XMPP (Jabber) account under 13.04. Occasionally, I
believe however not _every_ time I log out, I must reauthenticate.
Which logs can I check?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
I tested the latest upstream kernel which seems to oops my system
(alt+sysrq+b won't reboot even, though I'm not sure magic sysrq is
enabled on the machine). I'm not sure how to debug something in such a
state.
As there seems to be a regression in mainline, I think at least this bug
can be closed.
Public bug reported:
Problem causing my wireless card to disconnect when establishing a
configuration for ad-hoc mode. Noticed it when playing around with
commotionwireless, which uses Network Manager to setup the connection.
But something seems to go wrong with the drivers.
Infrastructure (mode
** Attachment added: "rhythmbox terminal output"
https://bugs.launchpad.net/bugs/949944/+attachment/2834428/+files/rhythmbox-bug_log-remove_ipod_playlist.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.ne
** Attachment added: "rhythmbox strace output from start to playlist removal
and segfault"
https://bugs.launchpad.net/ubuntu/+source/rhythmbox/+bug/949944/+attachment/2834430/+files/rhythmbox-strace-remove_ipod_playlist.txt
--
You received this bug notification because you are a member of Ub
Public bug reported:
I've got a friend who owns one of those Appleproducts that I can't stand
(promise, not me). Everytime a playlist is removed from an iPod (whether
the playlist is empty or not doesn't matter) Rhythmbox crashes with the
following text in the terminal:
"(rhythmbox:13791): GLib-G
lspci:
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics
Controller (rev 02)
Using latest updates for 11.10 Oneiric Ocelot and xserver-xorg-video-
intel, I get edidfai
Ubuntu 11.10 with php-cgi (php5) and libapache2-mod-fcgid causes this,
however I only seem to have the problem on heavy loads - or at least
with rapid page loading. Is it after certain amount of page loads that
the cleanup process will have too much to clean up?
I only noticed there was a problem
+1 on Sebastien Bacher:
https://bugs.launchpad.net/ubuntu/+source/indicator-session/+bug/874194/comments/14
"So one of the comment indicated it has to do with the number of users on the
system, seems to happen when there are over 6 users to list"
I've got more than 6 users on one system with 11.
My experience with this bug is that if I enter the pin code myself,
instead of having the N900 communicate with the SIM card, it works:
http://ubuntuforums.org/showpost.php?p=10953857&postcount=14
This workaround is coherent with my above quote regarding waiting before
communicating with /dev/ttyA
At the gentoo bug forums, this is discussed too:
http://bugs.gentoo.org/show_bug.cgi?id=348849
I quote Alexander E. Patrakov 2011-02-17:
> This may be because Nokia N900 eats the first character of the commands if
> they
are issued immediately after opening /dev/ttyACM0. Here is how to demonstrat
** Summary changed:
- [STAGING] rt2x00 won't connect to network
+ [STAGING] rt2800usb loads before correct driver rt2870sta [was: rt2x00 won't
connect to network]
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad
rmmod rt2800usb did the trick!
rt2780sta is apparently the right driver to use, and rt2800usb hijacked
my device.
Thank you, Wolfgang Kufner!
If you still want the output, I guess I'll have to disconnect and copy
it. But I assume this can be marked as solved - however I'm not sure how
to patch i
...I'm trying to hunt this down now to see if this was perhaps not
related to the latest kernel.
There were a lot of problems with "no space left" (ENOSPC) and by looking up
the 'rsv_check' stuff for btrfs, I came upon this thread:
http://www.spinics.net/lists/linux-btrfs/msg05310.html
"To avoid
I noticed 'rsyslogd' was doing an awful lot of work, and when checking
/var/log/syslog I found lots of btrfs output when rsyncing (for backup):
[ cut here ]
WARNING: at /build/buildd/linux-2.6.35/fs/btrfs/extent-tree.c:3441
btrfs_block_rsv_check+0x1c3/0x220 [btrfs]()
Hard
Is the "local" display completely shut off? (no sign of backlight, i.e.
just a bad brightness setting)
Have you tried pushing the key combination for switching between
local/external/combined display a couple of times? (The blue Fn + one of
the F#-keys with monitor[s] next to it)
Have you tried b
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/791992
Title:
btrfs in 2.6.38 extremely slow (when near full?)
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
Public bug reported:
I don't know yet if this is related to the disk being full, but the
following reasons are why I suspect 2.6.38 to be the culprit:
1. I have a 2TB disk with btrfs filesystem on an encrypted (cryptsetup) LUKS
partition
2. I set it up and installed using Ubuntu 10.04 Lucid, and
I got this with 2.6.38-8 at least, and latest updates per 2011-04-19
13:30
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/724735
Title:
aptd crashed with UnicodeDecodeError in _set_status_details():
The network I'm connecting to is merely a WPA-PSK network with no
oddities in naming conventions or so. Observe that the following output
is using the 2.6.35-28 kernel since I didn't make the bug report until I
rebooted. Should there be any interest in the output from the newer
kernel, I'd be happy
Public bug reported:
I have the following device connected as USB wireless dongle:
Bus 001 Device 004: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless
Adapter
It works well in my relatively bad conditions using the latest kernel
from Ubuntu 10.10, 2.6.35-28-generic, while running the 2.6.3
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/765606
Title:
[STAGING] rt2x00 won't connect to network
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listi
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/763853
Title:
WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256
dev_watchdog 0x213/0x220()
--
ubuntu-bugs mailing list
ubuntu-bugs@l
Public bug reported:
I have no idea what caused this. I was merely confronted with a bug
crash report window.
One of the dialogs (the last one before asking to submit the bug report)
didn't have any text whatsoever, so I answered 'yes'. And I have no idea
whether this is a regression or not, and
The projector keeps blinking as if it is getting a signal but not able
to display it. No message about synchronization or resolution is shown
(I have tried setting a very low resolution for external display too).
When unplugging the cable or turning the display output off, the
projector stops blin
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/734055
Title:
945GME external VGA not working
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu
Public bug reported:
Binary package hint: xserver-xorg-video-intel
I can't display anything on an external projector through the analog VGA
display port using my EeePC 901 with a 945GME gpu (kernel module i915).
This has only recently been a problem. So far I have only tried it on
one projector,
I am experiencing this problem on an Asus Eee901 formatted with btrfs (/
and /home are btrfs-formatted SSDs, but everything else disk-related is
fast, so it's not a hardware or btrfs bug).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
--
Timeout should not be -1 if $recordfail
https://bugs.launchpad.net/bugs/669481
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu
Public bug reported:
Binary package hint: grub2
My experience is that $recordfail is not always written successfully,
which is by default tested in grub.cfg (through grub.d/00_header)
This causes grub2 to set timeout=-1 which removes the timeout for bootup
in these cases.
On computers which hav
I have disabled generating thumbnails and waveforms. The problem still
affects me.
--
pitivi crashed with SIGSEGV in PyEval_EvalCodeEx()
https://bugs.launchpad.net/bugs/640630
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
This is more critical than just a new version available. Using mod_fcgid
< v2.3.5 apparently has buggy upload behaviour for files larger than 64k
(per default, but in fact larger than the variable
FcgidMaxRequestInMem).
This node on drupal.org describes the behaviour:
http://drupal.org/node/635270
This has apparently been noticed on
https://bugs.launchpad.net/bugs/573591
--
New upstream version available
https://bugs.launchpad.net/bugs/499988
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@
Ah, nice work Milan!
--
[users-admin] deleting a user doesn't work
https://bugs.launchpad.net/bugs/458883
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/
I am experiencing this problem too (marked #463582 as duplicate) and my
steps to reproduce include a new session - and even a separate user. So
this bug seems to be generic for any kind of account deletion, even with
the original user created by a clean install of at least Ubuntu 9.10.
The GIDs ar
*** This bug is a duplicate of bug 458883 ***
https://bugs.launchpad.net/bugs/458883
** This bug has been marked a duplicate of bug 458883
[users-admin] deleting a user doesn't work
--
User not removed from users-admin interface
https://bugs.launchpad.net/bugs/463582
You received this bug
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/34623152/AlsaDevices.txt
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/34623153/BootDmesg.txt
** Attachment added: "CRDA.txt"
http://launchpadlibrarian.net/34623155/CRDA.txt
** Attachment added: "
Public bug reported:
My guess is that this was caused in combination with 'gnome-display-
properties'. My system seemed to lock up when my monitors were probed
and an external monitor was configured for an extended desktop with a
higher resolution than 1024x768 (at least).
ProblemType: KernelOops
Commited to upstream
https://bugzilla.gnome.org/show_bug.cgi?id=600056
** Bug watch added: GNOME Bug Tracker #600056
https://bugzilla.gnome.org/show_bug.cgi?id=600056
--
User not removed from users-admin interface
https://bugs.launchpad.net/bugs/463582
You received this bug notification beca
Public bug reported:
Binary package hint: gnome-system-tools
A user is not removed when choosing to do this through the 'users-admin'
tool.
The GIDs are the GIDs my users had.
Steps to reproduce:
0. Login as administrative user (GID:1000)
1. Create a new user as Administrator (GID:1001).
2. Reb
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34616297/Dependencies.txt
--
User not removed from users-admin interface
https://bugs.launchpad.net/bugs/463582
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I posted it upstream:
https://bugzilla.gnome.org/show_bug.cgi?id=600016
** Bug watch added: GNOME Bug Tracker #600016
https://bugzilla.gnome.org/show_bug.cgi?id=600016
--
Confusing error message when double-registering XMPP account
https://bugs.launchpad.net/bugs/462726
You received this bug
Public bug reported:
Binary package hint: empathy
The error message "Authentication failed" is confusing when accidentally
double-registering an XMPP-account with a server.
Confusion is caused because "use an existing" and "register new" choices are
not obvious for a user new to XMPP account re
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34546400/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/34546401/XsessionErrors.txt
--
Confusing error message when double-registering XMPP account
https://bugs.launchpad.net/bu
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/34426625/AlsaDevices.txt
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/34426626/BootDmesg.txt
** Attachment added: "CRDA.txt"
http://launchpadlibrarian.net/34426627/CRDA.txt
** Attachment added: "
Public bug reported:
I have no idea in which situation this was caused. But I was fipplin'
about with an IDE->USB converter and was plugging it in and out
occasionally. That seems most likely to cause this.
The disk I was mounting is about to fall apart.
ProblemType: KernelOops
Annotation: Your
Public bug reported:
Binary package hint: ubuntuone-client
ubuntuone-client doesn't seem to be able to connect. I have been
redirected to the ubuntuone Launchpad OpenID interface and granted my
machine name.
I'm sharing my home folder over several computers (in this case 'mmneee'
and 'memene'),
** Attachment added: ".home.mmn..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/34032320/.home.mmn..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added:
".home.mmn..cache.ubuntuone.log.syncdaemon.exceptions.log.txt"
http://launchpadlibrarian.net/34032329/.
I'm experiencing what seems the same problem on two Eee901s (bluetooth
and 3G models respectively).
They have rather identical chipsets as the 1000H.
--
[ASUSTeK Computer INC. 1000H] late resume failure
https://bugs.launchpad.net/bugs/438673
You received this bug notification because you are a m
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/31392880/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/31392881/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/31392882/ProcStatus.txt
** Attachm
Public bug reported:
Details which may be interesting:
I was attempting to connect to a 3G network using an Huawei E620 USB modem, but
was experiencing troubles with this:
Bus 001 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Perhaps less interesting:
I was currently run
** Attachment added: "Places menu, split screenshot describing "show icons in
menus"-bug"
http://launchpadlibrarian.net/31368859/places_menu_icons_bug.png
--
Some icons shown despite unchecked "Show icons in menus"
https://bugs.launchpad.net/bugs/424885
You received this bug notification bec
Public bug reported:
Binary package hint: gnome-panel
I have unchecked "Show icons in menus" under gnome-appearance-
properties. This is only effective for the first level of menus in
gnome-panel, i.e. Applications.
Screenshots explain where icons are shown and not:
The Application-menu screensh
** Attachment added: "Applications menu screenshot describing "show icons in
menus"-bug"
http://launchpadlibrarian.net/31368851/applications_menu_in_karmic_alpha4.png
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/31368852/Dependencies.txt
--
Some icons shown despi
mobileinternet.tele2.se has stopped working for me, oddly enough. Now I
have to use internet.tele2.se
I'm guessing it was an internal switch at Tele2 to a shorter APN...
** Changed in: mobile-broadband-provider-info (Ubuntu)
Status: New => Invalid
--
Tele2 (.se) 3G-PPP APN is incorrect
h
Tele2 mobile internet settings are available from their website (which
is where I read mobileinternet.tele2.se) on http://www.tele2.se
/kundservice-installationsguider.html
It's at least available in the PDF for E270+ modems
--
Tele2 (.se) 3G-PPP APN is incorrect
https://bugs.launchpad.net/bugs/
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/28550863/Dependencies.txt
** Attachment added: "Gconf.txt"
http://launchpadlibrarian.net/28550864/Gconf.txt
** Attachment added: "NetDevice.eth0.txt"
http://launchpadlibrarian.net/28550865/NetDevice.eth0.txt
** Attac
Hahaha, nice. Well ubuntu-bug is rather extensive... Perhaps I should've
removed most log files as that's not really part of the problem :)
--
Tele2 (.se) 3G-PPP APN is incorrect
https://bugs.launchpad.net/bugs/393897
You received this bug notification because you are a member of Ubuntu
Bugs, whi
Public bug reported:
Binary package hint: network-manager
Tele2/Comviq default APN for NetworkManager did not work with my
recently acquired SIM card and Huawei E620 USB modem. I live in Sweden.
The default value in 9.04's latest network-manager is
"internet.tele2.se". This did not work for me a
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/24802179/Dependencies.txt
--
seahorse can't sync with socks proxy only
https://bugs.launchpad.net/bugs/355050
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
u
Public bug reported:
Binary package hint: seahorse
seahorse can't access key servers over HTTP (hkp://) when only SOCKS proxy is
configured in gnome-network-properties.
I have no means to try with an HTTP proxy configured.
Error message (for each hkp:// key server with respective change host:po
Public bug reported:
Binary package hint: compiz-fusion-plugins-extra
Running latest (as of date) versions of Ubuntu 8.10 on an
I was running with the "Extra" visual effects set through Appearance. On
top of this, I had enabled "Rotate Cube" (and thus disabled Desktop
Wall, and enabled Desktop C
70 matches
Mail list logo
