Hi
I can reproduce this bug again with the following setup.
Ubuntu Karmic 09-10 stock 32 bit installation disk.
Mainboard: Abit KR7A - Raid
CPU AMD Athlon 1900+
Highpoint HPT 370/372 external ATA controller.
Via VT8366A southbridge
Hard disk setup
Primary master: DVD rom drive.
Secondary
Here is the generated grub.cfg after installation.
** Attachment added: grub.cfg
http://launchpadlibrarian.net/43099243/grub.cfg
--
HPT370 infinite reboot loop as GRUB loads
https://bugs.launchpad.net/bugs/529363
You received this bug notification because you are a member of Ubuntu
Bugs,
Here is an lspci dump when the boot CD has started up. It shows that the
highpoint controller has been detected.
** Attachment added: lspci_output_cdrom_boot
http://launchpadlibrarian.net/43099566/lspci_output_cdrom_boot
--
HPT370 infinite reboot loop as GRUB loads
Problem happened with an on-line upgrade from 08.04 to 08.10 as well.
Laptop specs.
Intel core 2 duo processor
2gb ram
intel GMA950.
Fujitsu Siemens Amilo series.
--
kblueplugd crashed with DBusException in call_blocking()
https://bugs.launchpad.net/bugs/279983
You received this bug
During the a fresh install of the Hardy heron alpha 3 this bug surfaces
again on my system.
CPU AMD athlon 64 3200 +
ATI X800 pro.
2 GB RAM.
Error message supplied by display properties in Kubuntu.
The module monitor and display could not be loaded.
The diagnostics is:
Library files for
Public bug reported:
During the installation of the Gutsy Beta , the following error was
observerved.
Installation hangs at the moment where dutch localization files (NL) are
downloaded.
The user is not informed about anything, so the progress bars, just hangs at
87%.
The error occurs when
** Attachment added: Screenshot.png
http://launchpadlibrarian.net/9888431/Screenshot.png
--
Gutsy install hangs during download of Dutch localisation files.
https://bugs.launchpad.net/bugs/150717
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
I have a similar bug on my ubuntu test box with the following specs.
Specificiations
Ubuntu Feisty 7.04
RevisMion history /
Initial install Dapper Drake, Upgraded From Dapper To Edgy and from Edgy to
Feisty.
CPU AMD athlon 64 3200 +
Video card Ati Radeon X800 pro.
Installed FGLRX driver.
Hi Jonathan
I looked at the listed bug report 61247, but I did not send it.
Guess it was another person intended for this mail.
Niels
Jonathan Jesse schreef:
Good afternoon,
I noticed this bug is reported against Edgy Knot-3 and I am wondering if you
were able to install Edgy in the final
Hi
Thanks for the workaround, this was a nasty one since I did not have a
clue that it was a bothed DHCP config.
It works and I am now upgrading my box to stay current.
--
[Edgy Regression] Dhclient error on Realtek 8169/8110: send_packet: Message too
long
https://launchpad.net/bugs/63209
--
Here is some update.
Eth0 (my network card) is still having problems. When is is configured
with a static ip, the card shows up in the KDE system information and I
can ping my router and my ISP dns server.
When I configure eth0 with a dynamic ip using the control panel, eth0
could not obtain a
Here is some output from ifconfig and and the dhcp deamon. It looks like
kubuntu can not contact my router to obtain a dhcp lease. Note when I
boot my PC in windows it works without problems.
[EMAIL PROTECTED]:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:76:E7:80:41
UP
*** This bug is a duplicate of bug 61247 ***
I got X up and running, it seemed that the xorg.conf reverted back to
the ati driver instead of the fglrx driver.
I commentented out the dri line.
This is what I think is the root cause for the X issue. I advise to
check for fglrx dependency during
Public bug reported:
When I installed the edgy eft distribution from the CD with the default
kerne, my network card was not recognized anymore.
I did work out of the box with the dapper drake distribution, which
installed successfully on my box. I could configyure the NIC and I could
have had
*** This bug is a duplicate of bug 61247 ***
Public bug reported:
When I upgraded from Kubuntu Dapper drake to te Edgy Eft beta by using
the dist upgrade commands, X does not work after the reboot. The screen
stays blank and after a while the text based login screen opens.
Both the 2.6.17.x
*** This bug is a duplicate of bug 61247 ***
Her is the Xorg.0.log output
It is a large one so I have attached it as a file.
It looks like the x init process fails.
** Attachment added: Xorg.0.log file
http://librarian.launchpad.net/4554011/Xorg.0.log
--
Upgrade from dapper drake to edgy
*** This bug is a duplicate of bug 61247 ***
Hi
I tried reconfiguring X by using the command sudo dpkg-reconfigure
xserver-xorg
But still the same probs an no X.
Here is a new logfile.
Maybe this information will help, since I know X does not like dual head
video cards.
Video card X800 pro
17 matches
Mail list logo
