Inspired by #17 - What seems to have worked for me is to disable all
nvidia service scripts.
First, can take note of current setting with:
$ for e in suspend hibernate resume;do sudo systemctl status
nvidia-$e.service;done
● nvidia-suspend.service - NVIDIA system suspend actions
Loaded:
Tried the suggestion in comment #9 and that produced the error message
"Invalid client RPC password. Try reinstalling BOINC."
I already did a reinstall using aptitude.
I also found a version of the file at a higher level, but messing with
that one didn't help, either.
--
You received this bug
The minimal solution of comment #4 did not work for me. I also tried
manually changing the permissions of the file to make it "Read and
write", but I didn't look for the BOINC group, so I'm going to try that
next...
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Not sure it an nvidia driver issue. Using nvidia-settings to change anything
in 'X Server Display Configuration' fixes the problem.
Here is my xrandr output after changing the x offset of one monitor from +230
to +240.
Ubuntu display settings:
$ xrandr --current
Screen 0: minimum 8 x 8,
Not sure why it's marked incomplete at this late date, but if I remember
correctly the problem was fixed not long after I reported it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/492995
Title:
Forgot to mention this was the "minimal" install selection
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1865006
Title:
Crash during Ubuntu 18.04 install to nvme drive
To manage notifications
Public bug reported:
Doing standard install, selecting default options to a Dell 7920 tower
resulted in a grub fatal error. I took the defaults for everything
except the bootline which required the following additional options in
order to boot the installer:
ACPI=off nomodeset
ProblemType:
Solved; Go to Plank Preferences-Behaviour-Restrict to workspace.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1650265
Title:
Icon of 'Plasma' show up on KDE
To manage notifications about this bug
Public bug reported:
When using debirf 0.35 to create an Xenial image, debirf fails to pack
the rootfs with the error below:
image-builder: debirf> modules complete
image-builder: debirf> creating debirf initrd ('nested')...
image-builder: debirf> creating rootfs.cgz...
Workaround in #19 working for me so far on Ubuntu 19.04. Have done a
reboot test and a powerup test so far.
Something I noticed earlier when the machine was stuck is that the machine was
able to get to the point where I could ssh to it after the GUI hadn't started.
The command below did bring
This has been fixed upstream in hdf5-1.8.17:
https://portal.hdfgroup.org/display/support/HDF5+1.8.17
with:
https://bitbucket.hdfgroup.org/projects/HDFFV/repos/hdf5/commits/a1617b7cdbe14173fcf690b4627059fa4528c19b
** Changed in: hdf5 (Ubuntu)
Status: New => Fix Released
--
You received
Okay, after the latest update (from the 0-13 kernel) it now seems to be
booting normally. I hope that means the problem has been corrected and
this bug can be closed. Perhaps some kind of regression bug?
If anyone over there wants me to collect any additional information
about what was going on,
I am unable to run that command under the afflicted kernel because the
machine cannot boot under that kernel.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1815258
Title:
4.18.0-14-generic
The robotic message tells me to change the status to confirmed after
adding the previous comment, but the instructions there say that the
confirmed status is supposed to be done by someone else.
By the way, my current theory (based on weak understanding) is that
there might be some logs of the
** Description changed:
After the update for the 4.18.0-14-generic kernel the machine freezes on
booting. Machine still books under the 0-13 kernel. Booting in Recovery
Mode seems go normally to the Recovery Menu. At that point it reports
- "Starting Avahi mDNS-SD Stack" and gets and OK.
Public bug reported:
After the update for the 4.18.0-14-generic kernel the machine freezes on
booting. Machine still books under the 0-13 kernel. Booting in Recovery
Mode seems go normally to the Recovery Menu. At that point it reports
"Starting Avahi mDNS-SD Stack" and gets and OK. That is
Verification-done for bionic using grub2/2.02-2ubuntu8.12 and
grub2-signed/1.93.13+2.02-2ubuntu8.12:
This fixes this issue for UEFI with /boot/grub on ZFS.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Upon upgrading to grub 2.02-2ubuntu8.10 from 2.02-2ubuntu8.9 all of my
machines with /boot/grub on ZFS display a long list of the following
sort at boot, before reaching the GRUB menu.
Handle 0x49cb9b98
/ACPI (a0341d0,0)/PCI (0,14)/USB(9.1)/EndEntire
USB I/O
device
Here is the upstream report I just created:
https://gitlab.gnome.org/GNOME/gnome-shell/issues/898
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1810354
Title:
non-idiomatic date/time display for
Public bug reported:
On the top panel, the date/time info are displayed as:
四 1月3 09:38
It should be displayed as:
星期四 1月3日 09:38
If I switch off the date part, it is correct:
星期四 09:38
Is it because of the width limitation of date/time widget, or something
wrong with i18n?
** Affects:
Public bug reported:
It happened twice, however, I didn't notice how to reproduce it. The
problem happened suddenly (this time) when I am editing a commit message
in VSCode.
PROBLEM:
See the attached ime.gif demo. When I type some pinyin the corresponding
Chinese character is shown on the
Public bug reported:
The IME panel and the top panel's font does not follow what I set using
gnome-tweak. See attached screenshot. The font with blue circle is
correct while red circed fonts are too small.
ProblemType: Bug
DistroRelease: Ubuntu 18.10
Package: gnome-shell 3.30.1-2ubuntu1
I've tried installing wininet dotnet20 ie6 into a 32-bit wineprefix and
I can't authenticate with my Google account. Instead, I get a window
that shows:
You must be connected to the Internet to use this feature.
Try again
Close this window
This site says to copy over some GoogleOAuth registry
This is still an issue in 18.04.1 with dahdi 2.11
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1622266
Title:
dahdi-dkms not building wcaxx.ko module, needs to be added to
dkms.conf
To manage
Public bug reported:
I upgraded to 18.04 from 16 - and upon attempting to update to the
latest version of chirp, I was presented with this bug report.
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: chirp (not installed)
ProcVersionSignature: Ubuntu 4.15.0-33.36-generic 4.15.18
Uname:
This was a very long time ago. I have a totally new computer now. Thank
you.
On Sun, Aug 26, 2018 at 3:30 PM gf <1665...@bugs.launchpad.net> wrote:
> Hello Shannon,
> Thank you for submitting this bug and reporting a problem with cups. You
> made this bug report some time
Correction, I believe this is actually a bug in dbus. gnome-terminal,
and others are not setting as it should, but as far as I
know, dbus cannot support in a systemd environment due to
the limitations mentioned in #21.
** Also affects: dbus (Ubuntu)
Importance: Undecided
Status: New
This is a bug in every GNOME application that uses systemctl --user to
start itself. There is currently no sane fix because systemd is missing
a feature of upstart, umask inheritance. GNOME could abuse systemd's
instantiated services feature to pass the umask through this but this
would be far
Public bug reported:
After upgrading to kernel 4.15.0-24-generic (on Ubuntu 18.04 LTS)
NFSv4.2 mounts ignore the umask when creating files and directories.
Files get permissions 666 and directories get 777. Therefore, a umask
of 000 is seemingly being forced when creating files/directories in
Public bug reported:
When preseeding through apt-cacher-ng for archive.ubuntu.com, we are
getting bad archive mirror errors. It looks like out of the default
list http://mirror.veracruz.co/ubuntu/ which is the 1st in the list is
failing.
# curl http://mirror.veracruz.co/ubuntu/
The above work-around only worked once. After reboot I can't repeat the
success.still no mouse after login. Gonna dump this install, no mouse
equals no work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I clean installed Ubuntu 16.04 on a Dell Optiplex 390 and experience the same
lack of mouse function after successful login. I attempted the workaround
listed at the top of page but received the following error: "modprobe: ERROR:
could not insert 'usbhid': operation not permitted.
I then
Public bug reported:
Tried to install along side Kali, kept getting message about unresolved
errors, decided to erase partition and install clean when the crash
happened.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: ubiquity 2.21.63.4
ProcVersionSignature: Ubuntu
*** This bug is a duplicate of bug 1722988 ***
https://bugs.launchpad.net/bugs/1722988
Be warned of #3 - reboot brings terminal login :*(
Ok so after steps from #3, this seems to have fixed it:
sudo dpkg-reconfigure gdm3
select gdm3, push enter
Reboot
--
You received this bug
This seems to have fixed the problem for me:
sudo systemctl disable lightdm
sudo systemctl stop lightdm
sudo systemctl enable gdm #Seems to fail
sudo systemctl start gdm
sudo dpkg-reconfigure gdm3 #Shows lightdm selected
select gdm3, push enter
Reboot
--
You received this bug notification
Workaround (works for me) to get login screen back, switch from lightdm to gdm:
sudo systemctl disable lightdm
sudo systemctl stop lightdm
sudo systemctl enable gdm #Seems to fail
sudo systemctl start gdm
h/t @judd for the tip on
The DNS servers have always been listed under the vpn0 link when I run
systemd-resolve --status, even before your patch.
I still get no internal network name resolution, even when hard coding
the DNS servers in network manager.
Maybe I've got a different issue than what others are seeing, but I
Thanks for taking your time to work though this.
My link name is vpn0
Link 3 (vpn0)
Current Scopes: DNS
LLMNR setting: yes
MulticastDNS setting: no
DNSSEC setting: no
DNSSEC supported: no
DNS Servers:
DNS Domain: ~.
Link 2
Maybe I'm doing something wrong, but I installed the deb, and even did a
full reboot, and I'm still leaking my personal IP in the DNS leak test,
and am still unable to ping servers on the inside of the VPN network
when connected to the ANY connect VPN.
--
You received this bug notification
Not working for me, but I assume that's because I'm using network-
manager-openconnect-gnome?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1624317
Title:
systemd-resolved breaks VPN with
Yeah, setting the nameserver in /etc/resolve.conf doesn't seem to work
for me either.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1624317
Title:
systemd-resolved breaks VPN with split-horizon DNS
Yeah currently none of the workaround mentioned in the previous comments
seem to work at all for me on 17.04.
Not sure what to do at this point.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1624317
Is there any work around or eta? I just setup an HTPC and the remote
doesn't work properly without being able to run the config wizard.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1685646
Title:
Public bug reported:
I'm on 14.04
I'm fairly new. I feel like I've tried everything! Printer was working last
week. Now It just says "Held" or pending then disappears with no print.
I've downloaded the latest drivers.
Searching on USB bus...
hp-setup[3668]: debug: Bus 002 Device 001: ID
*** This bug is a duplicate of bug 1246929 ***
https://bugs.launchpad.net/bugs/1246929
Stop using pulse-audio and these problems go away.
Please just use ALSA.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Correction: "when away" should be "went away".
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532226
Title:
No menu bar in gtk apps on fresh boot
To manage notifications about this bug go to:
@Ian (ian-bradley)
You say it makes a lot of sense, but not to me, so I must have been unclear in
my description of what does not make sense.
The Title bar where the menus will appear is there and taking up screen
real estate whether or not you are hovering over it. The new feature (if
I
How do we know if this problem has gone away?
Anyway, I'm pretty sure that disabling the hover for menus was
sufficient to eliminate the problem on my machine. )However I can't
imagine why anyone would want such a feature in the first place. Just
because Microsoft uses a similar feature in
*** This bug is a duplicate of bug 1532226 ***
https://bugs.launchpad.net/bugs/1532226
At this time I'm inclined to regard this as a separate bug not directly
related to the gdk menu bar problem. They appeared at the same time, but
that was just because of the upgrade. Not sure how to prove
About 90% sure this is the same as a bug I tried to report earlier, but
is there any test to be sure? I have a couple of peculiar observations
that might help in the diagnosis and cure...
Suspending seemed to fix it, at least temporarily. Before that there was
nothing random about it. There were
*** This bug is a duplicate of bug 1532226 ***
https://bugs.launchpad.net/bugs/1532226
Is there any way to confirm that I am 90% sure that Bug #1532226 is the
proper one for what I reported? (Even better, is there some way I could
have been directed to that bug as I was describing my symptoms
If it is related to the Menu bar bug I reported earlier, then this one
should be folded into that one (Bug 1574160) and the Bug Heat of that
one should be increased. My initial research suggested that was the
primary problem, but I'm not certain that the apparent bug isn't a
design change with an
Public bug reported:
This behavior only began after installing 16.04 a few days ago. Watching
BOINC Manager start with four running tasks, the memory utilization
steadily creeps upward from about 30% and eventually it starts shutting
down tasks, but has to be tricked into resetting the memory
Public bug reported:
The Summary is just the most distinctive symptom now. There seem to be a
number of related pre-release reports, but none of them seemed the
correct link to what I'm seeing. Only Firefox seems to have access to
the Menu bar now. All other programs display only the program
Not sure if it's the same problem, but if so, BOINC is triggering it,
too. GPU is enabled, so that might be related to the video observation
above. Not sure how to include the diagnostic information if that will
help, but right now I'm going to reboot and confirm that the fresh boot
is normal.
Oh
Same issue here on 15.10
(evolution:1731): Gtk-WARNING **: Failed to register client:
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name
org.gnome.SessionManager was not provided by any .service files
(evolution:1731): camel-CRITICAL **: camel_provider_list: Could not load
I have this problem as well but my colleague does not.
I use Intel fake-raid and he uses pure Linux soft-raid.
I don't know why he doesn't have the problem - looking at the scripts in rc6
everyone using raid >1 should be experiencing this bug regardless of fake vs
soft.
I think a work-around is
Seems to be something wrong with the video "auto" setting in
.supertux2/config
When I checked the older version of Supertux, the setting is video "sdl"
You can check the video setting for Supertux2 from the terminal(CTRL+ALT+t) as
in this example:
$ grep 'video \"' .supertux2/config
(video
Public bug reported:
it always happens on startup
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: samba-common 2:4.1.6+dfsg-1ubuntu2.14.04.9
ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15
Uname: Linux 3.16.0-46-generic i686
ApportVersion: 2.14.1-0ubuntu3.12
Public bug reported:
it always happens on startup
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: samba-common 2:4.1.6+dfsg-1ubuntu2.14.04.9
ProcVersionSignature: Ubuntu 3.16.0-46.62~14.04.1-generic 3.16.7-ckt15
Uname: Linux 3.16.0-46-generic i686
ApportVersion: 2.14.1-0ubuntu3.12
Public bug reported:
14.04.2 LTS. Grub won't install, I get a fatal error message. Unable
to install GRUB in /dev/sda.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ubiquity 2.18.8.6
ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
Uname: Linux 3.16.0-30-generic
Public bug reported:
downloaded 14.04.1lts from the ubuntu website. when i run the installer
I get that message.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ubiquity 2.18.8
ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
Uname: Linux 3.13.0-32-generic x86_64
ApportVersion:
I am not sure. I have to press f2 and log in using what appears to be
safe mode with the 3.16 kernel. i cannot select the 3.19 kernel and log
in. It is available, but not effective.
On Mon, 2015-02-09 at 20:04 +, Joseph Salisbury wrote:
Are you only getting a panic with the 3.19 version of
When I power up my computer and allow it to boot itself I get the error
message. every time. If i press f2 and and choose other ubuntu options
Ican log in to any of the 3.14 or 3.16 options. the 3.19 does not work.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
what do comments #1 and #2 mean? is there any way i can repair this
issue?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1419223
Title:
offset kernel, can't boot
To manage notifications about
Public bug reported:
i upgraded online from 14.04 to 14.10. all worked well. then i tried to
clean my system using the symptic package manager and delete old
kernels. then i tried to update to 3.19 kernel. then i could not reboot
due to offset kernel panic.
ProblemType: Bug
DistroRelease: Ubuntu
Public bug reported:
Running sudo do-release-upgrade -d doesn't work, results in:
An unresolvable problem occurred while calculating the upgrade.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software
Perhaps there is a fix mentioned by Michael Murphy (mstick) at this link
can make thinks work for Earl:
https://plus.google.com/114251447858061222694/posts/MnPLEVs486u
Basically it entails starting alsamixer from the command line, then
moving to the various external ports related controls and
Thanks @Raymond!!
So Earl, maybe we can try the suggestion from the bug there to get sound
working:
#Bootup normally, ensure sound works, then run these in the terminal and test
the sound again:
sudo rmmod snd_hda_intel
sudo modprobe snd_hda_intel position_fix=1
If the above works, we can see
@Raymond - Thanks for the answers. Would you happen to know where we can
get the 'hda-jack-sense-test' util for Saucy 13.10?
David Henningsson's PPA at ppa:diwic/ppa, which formerly provided it,
only seems to provide packages for Precise(12.04) and below. For
example, the hdajackretask util has
Ok, I just thought of something.. For all those who want to get the
values from 'hda-jack-sense-test' (there are many apparently), perhaps
you can do this:
Run the LiveCD of 12.04 on your computer, then add
https://launchpad.net/~diwic/+archive/ppa to it and run the 'hda-jack-
sense-test' from
Um, woops... Please disregard my previous 2 comments.
I must have been suffering from a lack of oxygen to my brain or
something..
To get hda-jack-sense-test, we simply need to run these commands:
sudo add-apt-repository ppa:diwic/hda
(hit enter to run, authenticate, then hit enter to add)
sudo
headphone jack, and headset jack, and a microphone jack
are you sure that it support headset jack ?
There are 3 multimedia jacks, all are 3.5mm: microphone(picture of microphone),
headhpones/microphone-combo(picture of headhpones with microphone boom), and
headphones(picture of headphones).
Initial response from GNOME indicates the Ubuntu 3.6 version of gnome-
terminal is quite old. The current version (October 2013) is 3.10.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1234453
Title:
On suggestion of another submitted, reported to GNOME-CORE on 23 October
2013. See https://bugzilla.gnome.org/show_bug.cgi?id=710767
** Bug watch added: GNOME Bug Tracker #710767
https://bugzilla.gnome.org/show_bug.cgi?id=710767
--
You received this bug notification because you are a member
I confirm that this still occurs with gnome-terminal and mate-terminal
in Ubuntu 13.10. Same behaviour. Virtual terminals randomly freeze
output.
Note: this does not necessarily need to be long running. The behaviour
is random and can arise in a few minutes (10 minutes today) or a few
hours (6
Public bug reported:
What Was Expected:
Virtual Terminal would simply display output until program terminated or ended.
What Happens:
When running an application in terminal, either as a launcher or simply opening
a virtual terminal directly , the screen output randomly freezes and the
** Patch removed: Convert kernel_thread = kthread_run.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1030858/+attachment/3465019/+files/use_kthread_run.patch
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
HDA
driver in DKMS format.
Shannon
On Thu, Feb 14, 2013 at 4:00 AM, David Henningsson
960...@bugs.launchpad.net wrote:
If you're using the 3.5 kernel you need the dkms-hda-lts-quantal package
instead, quoting https://wiki.ubuntu.com/Audio
-quantal-dkms
ii alsa-hda-lts-quantal-dkms
0.201302141923~precise1 HDA
driver in DKMS format.
Thanks!
Shannon
On Thu, Feb 14, 2013 at 9:15 PM, Shannon VanWagner
shannon.vanwag...@gmail.com wrote:
Thanks very much Sir!
So I installed and after
(--install):
subprocess installed post-installation script returned error exit status
10
Something similar happens if I try to install the older package
(alsa-hda-dkms_0.201208081815~precise1_all.deb).
Anybody else seeing this problem?
Thanks!
Shannon VanWagner
On Thu, Aug 9, 2012 at 7:42 AM, David
nah, if it needs an extended GUI then its still a bug .. needs to work
like a built in connection of the dialog needs to be adjusted.. not too
sure why it worked OOTB in 10.10 but if it worked in a previous version
its a regression that can be remedied? :)
--
You received this bug notification
If there is a DOS based procedure, then no problem, but HP only provided
a WINDOWS based procedure.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
Title:
10ec:8171 wifi network get
Public bug reported:
If libreoffice (affects all components, e.g. Writer or Impress or
Calc...) is started by double clicking on an existing document, the
globalmenu is not accessible (meaning, if I move mouse to the window
title area, the globalmenu does not appear) in this specific session.
If
Model: G32-205TX (with RTL8191SE)
Connection type: AP supports 802.11n/g/b, I don't know the actual mode
it is running, how do I check?
I also attach some screenshots of the AP configuration.
** Attachment added: AP configuration screenshots.
Hi Christopher,
My BIOS version is F.23, I checked the link you gave me and
unfortunately this stuff works for WINDOWS only, and most methods for
Linux require a DOS based bios flash utility. My laptop is Linux only.
Also, my reporting that after upgrade to 12.10, the situation gets much
1) didn't upgrade bios
2) encryption type: WPA2-PSK
3) AP: Buffalo WHR-G300N
4) no mac filtering
5) No idea now to check QoS WMM
6) other device does not have such problem with the same AP(s), including
Windows 7 and mobile phones (iOS and Android)
7) this problem seems NOT related to the AP
apport information
** Tags added: apport-collected quantal running-unity
** Description changed:
I found a few similar bugs in launchpad history but they are at least
3-4 years old, and I encounter this problem just after upgrade to 12.04!
I consulted a colleague who is a network
apport information
** Attachment added: BootDmesg.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406970/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
apport information
** Attachment added: CRDA.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406971/+files/CRDA.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
Title:
wifi
apport information
** Attachment added: CurrentDmesg.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406972/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
apport information
** Attachment added: Dependencies.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406973/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
apport information
** Attachment added: IpAddr.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406974/+files/IpAddr.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
Title:
apport information
** Attachment added: IwConfig.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406975/+files/IwConfig.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
Title:
apport information
** Attachment added: Lspci.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406976/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
Title:
wifi
apport information
** Attachment added: Lsusb.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406977/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
Title:
wifi
apport information
** Attachment added: NetDevice.eth0.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406978/+files/NetDevice.eth0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: NetDevice.lo.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406979/+files/NetDevice.lo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1000208
apport information
** Attachment added: NetDevice.wlan0.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406980/+files/NetDevice.wlan0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: NetworkManager.conf.txt
https://bugs.launchpad.net/bugs/1000208/+attachment/3406981/+files/NetworkManager.conf.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
1 - 100 of 572 matches
Mail list logo
