Did you see my response of 11/15/09?
On Mon, Mar 8, 2010 at 7:05 PM, Doug Morse d...@dougmorse.org wrote:
Hi rik (and others),
Thanks for the suggestion.
I did in fact resolved the problem, but before your post...
I knew I wasn't crazy -- I HAD seen xsane work on the machine under
WUBI.
OK, it looks like v4l:/dev/video0 is refering to my webcam, so the sane was
getting mixed up there. To make a long story short, my scanner is now
working! (woot!) Even better, it's working with the standard Ubuntu 9.10
sane and xsane packages ... no source compiles (double woot!). Here is
Thanks for the advice. I installed libsane 1.0.19, xsane 0.93, then 0.996.
But now I'm getting Failed to open device `v4l:/dev/video0': Invalid
argument
--
failed to start scanner: Invalid argument
https://bugs.launchpad.net/bugs/478761
You received this bug notification because you are a
Yes 32 bit... Can I provide anything else?
--
failed to start scanner: Invalid argument
https://bugs.launchpad.net/bugs/478761
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/35387594/Dependencies.txt
** Attachment added: XsessionErrors.txt
http://launchpadlibrarian.net/35387595/XsessionErrors.txt
--
failed to start scanner: Invalid argument
https://bugs.launchpad.net/bugs/478761
You received
Public bug reported:
Binary package hint: xsane
I have a Brother MFC 210C. I have just done a fresh install on this
machine of Ubuntu 9.10 and scanning no longer works. (Printing works
fine) I have installed these packages from the Brother site:
cupswrapperMFC210C-1.0.2-3.i386.deb
Also, the LCD screen on the printer shows Receiving Data for less than 1
second.
Just to clarify... printing is fine in all other apps.
On Wed, Aug 27, 2008 at 3:45 PM, abrianb [EMAIL PROTECTED] wrote:
It's the same for me. Everything is normal, then the print icon shows
for less than 1
No, it just displays the printer icon for about 1 second in the notification
area on the bottom panel (see my note on this bug from Aug 6).
On Tue, Aug 26, 2008 at 12:18 PM, Steve Beattie [EMAIL PROTECTED]
wrote:
Thank you for helping to improve Ubuntu. What does OpenOffice do when it
fails to
Can anyone provide direction to allow us to collect data (i.e. log
files, commands to run) that would help developers?
On 8/21/08, Chris Cheney [EMAIL PROTECTED] wrote:
This is very likely not to be an openoffice issue since openoffice has
not been changed in Ubuntu 8.04 since Jun 27, 2008. So
FYI, I have filed this bug in the OpenOffice issue tracker:
http://www.openoffice.org/issues/show_bug.cgi?id=92946
--
I am unable to print from open office, I tried reinstalling open office but it
did not work. I use a brother mfc240c printer and I am running Hardy. Printing
from other apps
Has any OOo dev looked at this bug that can shed some light? As it is,
things seem quite unstable in my eyes.
On 8/18/08, abrianb [EMAIL PROTECTED] wrote:
Open Office began printing again before I had updated. So I am not
convinced updates cause the change. I just updated and still print. I am
ARR!!! It broke again for me too!!!
On Tue, Aug 12, 2008 at 7:57 PM, abrianb [EMAIL PROTECTED] wrote:
Open Office stopped printing today. The last update downloaded was comm
data ?
--
I am unable to print from open office, I tried reinstalling open office but
it did not work. I use a
It's working for me too!!
On Fri, Aug 8, 2008 at 6:55 PM, abrianb [EMAIL PROTECTED] wrote:
Open office started printing today! I don't know why. perhaps its because
of a recent update. I don't know what update did this. I do know that
currently the following updates are waiting to load.
BTW, in case this happens again, check out gnumeric and abiword...
they were quite acceptable temporary substitutes for my needs.
On 8/8/08, abrianb [EMAIL PROTECTED] wrote:
I downloaded those updates and Open Office Still prints.
--
I am unable to print from open office, I tried
Seems the same as my problem, except I have the Brother MFC-210C. I have
reinstalled the printer drivers (both lp and cups). I should add that I
noticed that the printer notification icon in the bottom panel appears
for about 2 seconds after printing. I also can print with all other
apps.
--
I
Also, I should add that I have been printing successfully from
OpenOffice using this printer for a long time. However, this problem
has come up now and then, and I'm not sure why it somehow goes away.
--
I am unable to print from open office, I tried reinstalling open office but it
did not
I wonder if this is caused by updates from Update Manager ... an
update may break it, then a later update fixes it, etc.
On 8/6/08, abrianb [EMAIL PROTECTED] wrote:
I too have been able to print from Open Office in the past. When I
first upgraded to Hardy I lost the ability to print from OO,
Feisty
On Jan 15, 2008 7:58 AM, Pedro Villavicencio [EMAIL PROTECTED] wrote:
Thanks for the report, Which version of Ubuntu are you using ? I'm using
Hardy and that seems to work fine here. thanks.
** Changed in: gnome-orca (Ubuntu)
Importance: Undecided = Low
Status: New =
It's been over a month and it looks like no one has looked at this yet.
--
DVD playback choppy
https://bugs.launchpad.net/bugs/175022
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
It's been over a month and it looks like no one has looked at this yet.
--
kino produces choppy mpeg
https://bugs.launchpad.net/bugs/175021
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
It's been over a month and it looks like no one has looked at this yet.
--
orca magnifier causes CPU fan to get very loud
https://bugs.launchpad.net/bugs/175020
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
On Dec 18, 2007 4:39 AM, John Zero [EMAIL PROTECTED] wrote:
Yesterday I accidentally booted with kernel 2.6.17 (I think from Dapper?)
and everything worked totally perfectly!
ehci_hcd was loaded, running, everything was fine, USB was working at the
fast, 2.0 speed.
--
ehci_hcd module
Public bug reported:
Binary package hint: gnome-orca
Enable the screen magnifier on a Dell desktop system.
The CPU fan gets very loud continuously, even when the machine is not in use.
** Affects: gnome-orca (Ubuntu)
Importance: Undecided
Status: New
--
orca magnifier causes CPU
Public bug reported:
Binary package hint: kino
I have 2 partitions on a Dell desktop system... 1 is Dapper and 1 is
Gutsy. When I boot to Gutsy and capture video into Kino from my camera,
then export it as an MPEG, and playback the MPEG, the playback is very
choppy. Other MPEGs (i.e.
Public bug reported:
I have Ubuntu Dapper and Gutsy on my machine. It has a Sony DVD drive
that works great under Dapper, but under every Ubuntu version after
Dapper it has problems. I could not get it to work at all under Feisty,
and under Gutsy, I can only get it to work by adding the
Is there any way to automatically unload ehci_hcd on boot (or keep it from
loading in the first place).
On Dec 5, 2007 10:21 PM, Robert North [EMAIL PROTECTED] wrote:
Update on my last report.
It seems I may be experiencing intermittent failure of usb system on boot.
Will investigate when I
Public bug reported:
Every time I connect my ipod nano, nothing happens until I open a
command line window and type:
sudo modprobe -r ehci_hcd
It should mount automatically.
I am running gutsy.
** Affects: ubuntu
Importance: Undecided
Status: New
--
ipod won't mount unless I
Now, it's working, once I turned on Desktop Cube and Rotate Cube. It also
worked once I turned on Desktop Wall. I must have gotten into a state where
too many things were turned off.
On Nov 7, 2007 8:35 PM, Basilio Kublik [EMAIL PROTECTED] wrote:
Hi Tzadik
Do you have more than one workspace
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/10304746/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/10304747/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/10304748/ProcStatus.txt
--
can't
Public bug reported:
Binary package hint: gnome-panel
Once I turned on desktop cube in Advanced Desktop Effects Settings, I
can no longer switch between desktops... I'm stuck on the first one.
Turning off desktop cube did not help.
ProblemType: Bug
Architecture: i386
Date: Wed Nov 7 19:52:54
I just tried with all_generic_ide=1 in Gutsy and it's working.
--
CDROM drive no longer working, unable to mount.
https://bugs.launchpad.net/bugs/94119
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
I have just done a fresh install of the final Gutsy, and it's still not
working. When inserting a CD, /var/log/messages gets:
sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 1:0:1:0: [sr1] Sense Key : Hardware Error [current]
sr 1:0:1:0: [sr1] Add. Sense: Logical
FYI... you should know when I boot Feisty or Gutysy from the CD, it freezes
a long time (around 5 minutes) near the beginning of the boot process. You
should try it again and just leave it for a long time before giving up.
Once the freezing is over (on my machine) it boots normally, so it may be
all_generic_ide worked for me on my Dapper installation!
After I tried that, even though I had previously tried to solve the problem
by upgrading to Gutsy without success, I tried Gutsy again, this time as a
fresh install from a CD (Tribe 5). Now the CD and DVD both work with Gutsy,
even without
I tried IRQPOLL ... it didn't help.
--
CDROM drive no longer working, unable to mount.
https://bugs.launchpad.net/bugs/94119
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Definitely... I have had to go back to Dapper :(
On 7/31/07, termitor [EMAIL PROTECTED] wrote:
Nor the kernel 2.6.17, 2.6.20 or 2.6.22 of edgy feisty gutsy do not solve
my problem.
It is still worse under gutsy, or the drawer of the cdrom is closed
immediately as soon as I open it.
This
Did you also update the kernel, or you just added irqpoll?
On 7/31/07, termitor [EMAIL PROTECTED] wrote:
IRQPOLL solve this bug for me , please test this solution.
sudo gedit /boot/grub/menu.lst (or nano, ...)
add irqpoll on this ligne
# kopt=root=UUID=aed3ffb0-5cd6-4710-8b7c-e8f492537cf1
Did you try installing 2.6.22-7 as indicaated in a previous entry for this
bug?
On 7/17/07, gomek [EMAIL PROTECTED] wrote:
Kubuntu Feisty Fawn
kernel 2.6.20-16-generic
LG DVDRAM internal, ATAPI, 8X DVD-R, 4X DVD-RW, 8X DVD+R, 4X DVD+RW, 3X
DVD-RAM, 32X CD read, 24X CD-R, 16X CD-RW
Using
That definitely sounds like an awesome solution... thanks!
I will probably hold off a few days and would appreciate hearing from anyone
else who was tried this solution.
On 7/1/07, Koppie [EMAIL PROTECTED] wrote:
For everyone who's still having this problem, those of you who have
tried
Hi Steve
Do you mind telling me how to install an older kernel (or link to a page
that explains it)? I've never done that before.
Thanks,
Tzadik
On 6/20/07, Steve Feinstein [EMAIL PROTECTED] wrote:
From my setup. 2.6.20-15 doesn't work. It looks like
2.6.20-16.something did work. The
Public bug reported:
This drive works under Dapper but when I boot into Feisty (same
machine), I can see some files but I get I/O errors when I try to read
them or open subdirectories.
dmesg shows:
sr 1:0:1:0: SCSI error: return code = 0x0802
sr1: Current: sense key: Hardware Error
*** This bug is a duplicate of bug 94119 ***
https://bugs.launchpad.net/bugs/94119
Are you sure it's a duplicate? Mine is a DVD drive, not a CD drive.
On 6/20/07, Juan Pablo Salazar BertÃn [EMAIL PROTECTED] wrote:
*** This bug is a duplicate of bug 94119 ***
*** This bug is a duplicate of bug 94119 ***
https://bugs.launchpad.net/bugs/94119
Is there any fix I can do in the meantime?
On 6/20/07, Sanford Armstrong [EMAIL PROTECTED] wrote:
*** This bug is a duplicate of bug 94119 ***
https://bugs.launchpad.net/bugs/94119
Many of the
Is it safe to install on older kernel and continue to use Feisty? If so,
how do I do it?
Also... won't Ubuntu try to keep updating it if I do that?
On 6/20/07, Steve Feinstein [EMAIL PROTECTED] wrote:
I've had the same problem. Fails when using scd0 and works with hdc. A
recent kernel
44 matches
Mail list logo