Public bug reported:
[Impact]
* Add processor support from SMBIOS 3.6.0 in Jammy and Noble
to enable new hardware in LTS release per SRU policy [1].
* Backport of 1 relatively simple patch from dmidecode 3.6
in Oracular to dmidecode 3.3 in Jammy and dmidecode 3.5 in Noble
[Test Plan]
Early tests with the provided PPA for Jammy worked as expected. Below
the report:
We've confirmed successful results with the PPA ipmitool. Previously,
the SEL events for SPD_FAN_[1..4]_5 plus SPD_FAN_4_[1..4] were not
properly reported. E.g. these IDs for these fans were 0x1a0-0x1a7, and
only the
sos report of the jammy host
** Attachment added: "sosreport-ip-172-31-19-168-2024-06-04-gtcbeon.tar.xz"
https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/2068030/+attachment/5785859/+files/sosreport-ip-172-31-19-168-2024-06-04-gtcbeon.tar.xz
--
You received this bug notif
Public bug reported:
ubuntu-drivers is not returning any driver for g5g instances in AWS,
which use Tesla T4G cards:
# lspci -tv
-[:00]-+-00.0 Amazon.com, Inc. Device 0200
+-01.0 Amazon.com, Inc. Device 8250
+-04.0 Amazon.com, Inc. NVMe EBS Controller
+-05.
Weichen,
this was a bug on the snapd package until version 2.61.2:
https://bugs.launchpad.net/ubuntu/+source/snapd/+bug/2057491
snapd is now updated to 2.61.3 and the issue is fixed. It's unrelated to
the changes you made.
I also tried to reproduce it in my environment with a fresh installation
Public bug reported:
A fatal error was reported during installation.
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: ubiquity 22.04.20
ProcVersionSignature: Ubuntu 6.5.0-18.18~22.04.1-generic 6.5.8
Uname: Linux 6.5.0-18-generic x86_64
NonfreeKernelModules: zfs
ApportVersion: 2.20.11-0ubuntu
For evidence purposes, I'm attaching the output of 'iptables-save' in my
Ubuntu 22.04 machine.
** Attachment added: "iptables-save.txt"
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1973619/+attachment/5590257/+files/iptables-save.txt
--
You received this bug notification beca
Once I turn the firewall off, the autodiscovery starts working (without
any changes to /etc/sane.d/epson2.conf):
# service ufw stop
# scanimage -L
device `epson2:net:192.168.8.8' is a Epson PID 085E flatbed scanner
If I reload the firewall rules, the autodiscovery stops working again.
This is pr
Yes, it is:
$ dpkg --get-selections *sane*
libsane-common install
libsane-hpaio:amd64 install
libsane1:amd64 install
sane-airscaninstall
sane-utils
Public bug reported:
I have used every Ubuntu version since 16.10 and on all of them my
network scanner EPSON SX525WD could be discovered out of the box.
On 22.04 the output of 'scanimage -L' is:
No scanners were identified. If you were expecting something different,
check that the scanner is pl
Checking https://askubuntu.com/questions/1405901/ubuntu-22-04-ui-issues-
in-app-file-selector-save-prompt-saving-files-and-new-w I can confirm
that it's possible to work around this bug if edit the name of the file
to be saved, just adding any character to the filename and it will be
saved in any f
I tried downloading files using google chrome and firefox and the behavior is
the same. If I try to save the file to my homedir the file is downloaded, if I
try to save to /tmp it also works, but if I try to save to any other folder it
doesn't work, the download doesn't start.
I downloaded firef
For a Flatpak application to follow the system theme in use, the corresponding
Flatpak theme needs to be installed. For example, if I use the "Yaru" theme in
"Dark mode" with the "Prussian Green" accent color, the
"org.gtk.Gtk3theme.Yaru-prussiangreen-dark" needs to be installed. If it is,
both
Public bug reported:
package mysql-server-8.0 8.0.26 failed to install
ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: mysql-server-8.0 8.0.26-0ubuntu0.20.04.3
ProcVersionSignature: Ubuntu 5.4.0-80.90-generic 5.4.124
Uname: Linux 5.4.0-80-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.
Public bug reported:
i don´t know
ProblemType: Bug
DistroRelease: Ubuntu 21.04
Package: xorg 1:7.7+22ubuntu1
ProcVersionSignature: Ubuntu 5.11.0-25.27-generic 5.11.22
Uname: Linux 5.11.0-25-generic x86_64
.tmp.unity_support_test.1:
ApportVersion: 2.20.11-0ubuntu65.1
Architecture: amd64
BootLog:
I'm here to say that I'm having the same issue.
Until this evening, I was using Debian 10 with KDE, but I installed
Ubuntu 20.04 a few hours ago.
I use a laptop with a external keyboard connected on it and my laptop
have a numeric keyboard and my external keyboard don't, so I always use
the lapto
Public bug reported:
i don't know
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: python3-xdg 0.25-4ubuntu0.16.04.1
ProcVersionSignature: Ubuntu 4.4.0-79.100-generic 4.4.67
Uname: Linux 4.4.0-79-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.30
Architecture: amd64
Date: Sun Jul 18 14:24:
Public bug reported:
package mysql-server-8.0 8.0.25-0ubuntu0.20.04.1 failed to
install/upgrade: o subprocesso instalado, do pacote mysql-server-8.0, o
script post-installation retornou erro do status de saída 1
ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: mysql-server-8.0 8.0.25-0ub
This situation also affects me.
When I updated the chromium-browser, it stopped to function.
I tried to install an older version (65.0.3325.181-0ubuntu1), but there are
conflicts with needed packages (chromium-codecs-ffmpeg-extra
chromium-codecs-ffmpeg) once it doesn't try to install the older ve
This issue also affects arm64 and armhf architetures, making it
currently impossible for me to complete installation of my crossbuild
environment.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1883753
Public bug reported:
stopped the upgrade because the tables to apt is incorrect...
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: ubuntu-release-upgrader-core 1:16.04.30
ProcVersionSignature: Ubuntu 4.4.0-189.219-powerpc-smp 4.4.232
Uname: Linux 4.4.0-189-powerpc-smp ppc
ApportVersion: 2.2
this affects me for some years now, bosses now complain for me to move
to windows as now we are all remote with tons of meetings and this is a
big impact on how they see all this linux desktop adoption.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
Well, it is disappointing that you choose to close this as “won’t fix”.
As pointed out in the initial bug report, this “feature” is implemented without
notice or consent.
In other words, and to rephrase, this was done transparently in an hidden way.
Which is, to say the least, not corresponding
@sergiusens
Fantastic findings! Thanks a lot for looking into this.
This is also the underlying issue behind another issue I face when
selfhosting VS Code: it simply crashes when opening a native Open
dialog. Unsetting those env vars also fixes that issue!
We got that bootstrapping code from Mar
We have a similar problem with the Nagios:
(...)
OID : 1.3.6.1.2.1.25.2.3.1.2.1, Storagetype: Ram ?= FixedDisk
OID : 1.3.6.1.2.1.25.2.3.1.3.7, Desc : Cached memory
OID : 1.3.6.1.2.1.25.2.3.1.2.7, Storagetype: Other ?= FixedDisk
storages selected : 0
Unknown storage : /home$ : ERROR
After do
Just for information, that trying out Ubuntu 18.10 kernel
4.18.0-10-generic booting from USB pen, the problem remains (and the
intel_idle.max_cstate=1 workaround still works).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
Public bug reported:
I have a Lubuntu installation, in which I cannot upgrade because
grub2-pc refuses to install. After a while I found that linux-
image-4.15.0.38-generic also not installs, but grub2 in the main one,
because every apt installation is extremely long, since it tries to
install gru
** Also affects: apport
Importance: Undecided
Status: New
** No longer affects: apport
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1787729
Title:
[FAILED] Failed to start Process error
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1789214
Title:
Clevo N850EL crashes / freezes under Ubuntu 18.04.1
To manage notif
Good evening!
I can give feedback right away from the last 2 notes.
The other workaround proposed (in askubuntu.com) of adding a kernel
parameter intel_idle.max_cstate=1 seems to work well (max uptime tested
is 6h 45min so far).
Regarding the indication to use 4.18.3-041803-generic, I downloaded
> Did this issue start happening after an update/upgrade? Was there a
prior kernel version where you were not having this particular problem?
No upgrade. This is a fresh install, on a brand new laptop computer.
> Please test the latest v4.18 kernel[0].
I've tested the mainline kernel build v4.18
Public bug reported:
The details of what I've attempted so far are in
https://askubuntu.com/questions/1068161/clevo-n850el-crashes-freezes-
ubuntu-18-04-1-frequently
Any workaround help greatly appreciated. (I do not need NVIDIA graphics,
but I do need VirtualBox).
Regards,
ProblemType: Bug
Di
*** This bug is a duplicate of bug 1781849 ***
https://bugs.launchpad.net/bugs/1781849
Public bug reported:
apareceu isso do nada
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: python3 3.6.5-3ubuntu1
ProcVersionSignature: Ubuntu 4.15.0-24.26-generic 4.15.18
Uname: Linux 4.15.0-24-
Public bug reported:
how to fix?
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: gdm3 3.28.2-0ubuntu1.3
ProcVersionSignature: Ubuntu 4.15.0-24.26-generic 4.15.18
Uname: Linux 4.15.0-24-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
Date: Tue Jul 17 09:30:49 2018
Err
Same here.
Ubuntu 16.04 64 Bits @ Dell Inspiron 7560 (i7 16 GB RAM) 1 SSD + 1 HDD
Even copying via CLI.
Same USB Stick, same computer but with windows 10 = very fast.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
Public bug reported:
No further information
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: ubuntu-release-upgrader-core 1:16.04.24
ProcVersionSignature: Ubuntu 4.13.0-37.42~16.04.1-generic 4.13.13
Uname: Linux 4.13.0-37-generic x86_64
NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_mode
It happens to me to. Usually, when I click (with mouse) at some panel
element (calendar, configuration icon etc.).
I've a Dell Notebook with NVidia on it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
** Changed in: alsa-driver (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1740033
Title:
[Realtek ALC1220, Green Line Out, Rear] Background noise or low volume
Public bug reported:
I've upgraded my computer to a new one with a Realtek ALC1220 from an
ASUS crosshair VI hero and on my ubuntu 17.10 my 5.1 surround left audio
is busted, I've configured the system audio to 5.1 and tested all
speakers one by one and the only one that isn't working correctly is
glad I could help!
regards,
Joao
On 12/19/2017 06:00 PM, Corey Bryant wrote:
> Hi All, thanks for reporting this. I've pushed a fix the Queens package
> that will be included in the next Queens upload of horizon.
>
> ** Changed in: horizon (Ubuntu)
> Status: Tria
root@jonas-X541UV:/home/jonas# strace plymouth --ping
execve("/bin/plymouth", ["plymouth", "--ping"], [/* 84 vars */]) = 0
brk(NULL) = 0x55c8840d8000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or
directory)
mmap(NULL, 12288, PROT_READ|PROT_WRITE,
Hello,
Yes, 'plymouth --ping' runs forever with my user and with sudo.
jonas@jonas-X541UV:~$ plymouth --ping
I've solved this issue using 'killall plymouth' in another term.
Thanks in advance
On 18-10-2017 20:51, Brian Murray wrote:
> Thank you for taking the time to report this bug and helpi
I can try this weekend with 17.10, I never could install 17.10 via ISO
because my usb wifi stopped working there right at the installation also. I
spent several hours trying to understand the problem, but i couldn't.
This is the card:
https://www.newegg.com/Product/Product.aspx?Item=N82E1683332008
Public bug reported:
Setting up grub-common (2.02~beta3-4ubuntu7) ...
update-rc.d: warning: start and stop actions are no longer supported; falling
back to defaults
Job for grub-common.service failed because a timeout was exceeded.
See "systemctl status grub-common.service" and "journalctl -xe"
Public bug reported:
The installation cancels at 80%
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: ubiquity 2.21.63.4
ProcVersionSignature: Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17
Uname: Linux 4.10.0-28-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.10
Architecture: amd64
CasperVersion
Replying to note 12, (I'm the guy with the Clevo P150SM)
Kernel 4.4.0-83.106 crashed on boot (with the same error) 4 out of 5
times.
Kernel 4.4.0-87.110 crashed 0 (zero) out of 5 times.
I am keeping 4.4.0-87 for now (and removed 4.4.0-87).
PS: Something weird happening while installing 4.4.0-87
Public bug reported:
I try to install Dolibarr in my pc. But after a lot of problems with the LAMP,
I gave up.
And now there is a message that is displayed to me every time I access my pc.
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: dolibarr (not installed)
ProcVersionSignature: Ub
Answering to note 7,
>From 12 boot sequences (there was 2 seconds waiting in power-off mode
before starting the next boot), the results where:
Kernel 4.4.0-83.106 crashed on boot (with the same error) 5 out of 6
times.
Kernel 4.4.76-040476 crashed 0 (zero) out of 6 times.
Looking good for 4.4.
Answering first to note 5, yes.
All the times that kernel 4.4.0-83 crashed, the problem goes away if I boot my
previous kernel 4.4.0-81.
kernel 4.4.0-83.106 does not crash during all the boots. Only some
times. I could not figure out if they are related to cold/hot boots (in
the morning always su
Sorry for the wrong bug category, but it was my 1st contact with
"ubuntu-bug" command line tool, and I did not know which category to
choose.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1703091
Titl
Ooops! My first contact with ubuntu-bug was a bit messy. I seem to have
reported #1703091
Sorry for the mess.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1702164
Title:
Kernel panic - not syncing
Public bug reported:
I have a Clevo P150SM laptop. Recently, I have frequent kernel panics
"Fatal exception in interrupt".
Screenshot at https://i.stack.imgur.com/eZRcu.jpg
(I will try to upload the screenshot of the console once I have a bug
number).
It happened the 1st time kernel 4.4.0-83
Today, kernel 4.4.0-83 its booting fine (and it doesn't crash/hang on
boot).
(And yesterday, I did many reboots using the laptop power-on button, and
it crashed every time, after the package upgrades).
I run ubuntu-bug and chose "distribution upgrade" category (what else
?), but it gave back no b
Sorry if this not the proper way to ask, but I think I may have the same
problem (with a Clevo P150SM laptop), and asked for help on
https://askubuntu.com/questions/933015/ubuntu-16-04-kernel-4-4-0-83
-panic-fatal-exception-in-interrupt
(For me, it started crashing again today after one more set o
Hello everyone,
i could solve the problem by using the alternate iso 16.10 and what it
did different was to unmount a partition that was being used. Without
unmonting it i could not install grub on the destination drive ever.
Now all it is OK and i am using EFI. If you need me to do some other
te
OK i am adding the syslog now.
Please if you need, contact me. I am available to help.
All the best, good luck,
Pedro
** Attachment added: "syslog"
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1699671/+attachment/4900732/+files/syslog
--
You received this bug notification becau
Public bug reported:
I am trying to install Lubuntu 16.10 on this machine. Preferably with
EFI secure boot options. It does not work. Upgraded BIOS and all
firmware. Still didn't work. Tried to install normally with legacy BIOS
settings still doesn't work. After every attempt i low-level formatted
Public bug reported:
dpkg: erro ao processar o arquivo unity-editor.deb (--install):
impossível acessar arquivo: Arquivo ou diretório não encontrado
Erros foram encontrados durante o processamento de:
unity-editor.deb
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: systemd-sysv 225-1u
Public bug reported:
I don't know
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: libkjsapi4 4:4.14.16-0ubuntu3.1
ProcVersionSignature: Ubuntu 4.4.0-69.90-generic 4.4.52
Uname: Linux 4.4.0-69-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: amd64
Da
Public bug reported:
package tzdata 2016g-0ubuntu0.16.04 failed to install/upgrade:
subprocess installed post-installation script returned error exit status
1
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: tzdata 2016g-0ubuntu0.16.04
ProcVersionSignature: Ubuntu 4.4.0-42.62-generic 4.4
Public bug reported:
I tried to uninstall and something went wrong.
ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: postgresql-9.4 (not installed)
ProcVersionSignature: Ubuntu 4.2.0-38.45-generic 4.2.8-ckt10
Uname: Linux 4.2.0-38-generic x86_64
ApportVersion: 2.19.1-0ubuntu5
AptOrdering
Public bug reported:
During PAM processing of any request (auth, acct, or session), the
function audit_log_acct_message () (from /lib/i386-linux-
gnu/libaudit.so.1 ) is called to audit the event. One of the variables
that can be used during audit logging is the hostname of the requester
(PAM_RHOST
Public bug reported:
The crash occurs if the following PAM auth line is present when pppd tries to
authenticate a user ("login" option)
authoptionalpam_smbpass.so migrate
Apr 18 23:40:39 ubuntu pppd[1622]: Initializing PAM (3) for user j
Apr 18 23:40:39 ubuntu pppd[16
Problem also exists in archlinux arm.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1563184
Title:
InitializeSandbox() called with multiple threads in process gpu-
process
To manage notifications
Same happened to me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1509769
Title:
package initramfs-tools 0.120ubuntu6 failed to install/upgrade:
subprocess installed post-installation script retu
Public bug reported:
During a fresh install, grub-installer doesn't complete grbu2 install.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ubiquity 2.18.8.6 [modified:
lib/partman/automatically_partition/question]
ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3
Uname
I am also having the same problem here, it started to happen a lot after
I did regular updates last friday.
I am using nvidia drivers 331.113
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1451613
Tit
Public bug reported:
automatic update to nvidia driver (from 331.xx-update driver version available
under hardware prorietary drivers menu to further 331.113update) causes
frequent xorg crashes with no apparent cause, unrelated to any particular
process.
Also gdm fails to load on boot-up\reboot
6508 512 ?S15:54 0:00 |
\_ vmstat 300 2
hobbit 19872 0.0 0.0 4308 356 ?S15:54 0:00 \_
sleep 5
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS"
installed xymon-cli
Public bug reported:
error occurs after boot
ProblemType: Package
DistroRelease: Ubuntu 13.10
Package: blcr-dkms 0.8.5-2
ProcVersionSignature: Ubuntu 3.11.0-26.45-generic 3.11.10.12
Uname: Linux 3.11.0-26-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.12.5-0ubuntu2.2
Architecture: a
Same here, kubuntu 14.04 64bits on a Dell Precision 390 with nVidia
Quadro. No wireless cards.
Tried with nouveau nvidia driver and the 313 proprietary driver.
Had BIOS version 2.4.0, upgraded to 2.6.0 (thought I had bricked the
mobo in the process, as kubuntu did not shutdown as part of the bios
Public bug reported:
after login...
ProblemType: Package
DistroRelease: Ubuntu 13.10
Package: speakup 3.1.5.dfsg.1-1ubuntu1
ProcVersionSignature: Ubuntu 3.11.0-23.40-generic 3.11.10.10
Uname: Linux 3.11.0-23-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.12.5-0ubuntu2.2
Architecture
Public bug reported:
I get this bug after login
ProblemType: Package
DistroRelease: Ubuntu 13.10
Package: blcr-dkms
ProcVersionSignature: Ubuntu 3.11.0-23.40-generic 3.11.10.10
Uname: Linux 3.11.0-23-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.12.5-0ubuntu2.2
Architecture: amd64
apport information
** Attachment added: "VarLogDistupgradeMainlog.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125615/+files/VarLogDistupgradeMainlog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.la
apport information
** Attachment added: "VarLogDistupgradeScreenlog.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125616/+files/VarLogDistupgradeScreenlog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
apport information
** Attachment added: "VarLogDistupgradeLspcitxt.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125614/+files/VarLogDistupgradeLspcitxt.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
apport information
** Attachment added: "VarLogDistupgradeAptlog.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125613/+files/VarLogDistupgradeAptlog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
apport information
** Attachment added: "VarLogDistupgradeAptclonesystemstate.tar.gz"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125612/+files/VarLogDistupgradeAptclonesystemstate.tar.gz
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
apport information
** Description changed:
Impossível calcular a actualização da versão.
Ocorreu um problema durante o cálculo da actualização.
Isto pode ser causado por:
* estar a actualizar para uma versão de prá-lançamento de Ubuntu
* já ter a versão de pré-lançamento actual
* t
apport information
** Attachment added: "VarLogDistupgradeScreenlog.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125610/+files/VarLogDistupgradeScreenlog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
apport information
** Attachment added: "VarLogDistupgradeMainlog.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125609/+files/VarLogDistupgradeMainlog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.la
apport information
** Attachment added: "VarLogDistupgradeAptclonesystemstate.tar.gz"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125606/+files/VarLogDistupgradeAptclonesystemstate.tar.gz
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
apport information
** Tags added: apport-collected dist-upgrade saucy
** Description changed:
Impossível calcular a actualização da versão.
Ocorreu um problema durante o cálculo da actualização.
Isto pode ser causado por:
* estar a actualizar para uma versão de prá-lançamento de Ubunt
apport information
** Attachment added: "VarLogDistupgradeAptlog.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125607/+files/VarLogDistupgradeAptlog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
apport information
** Attachment added: "VarLogDistupgradeLspcitxt.txt"
https://bugs.launchpad.net/bugs/1325403/+attachment/4125608/+files/VarLogDistupgradeLspcitxt.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
Public bug reported:
Impossível calcular a actualização da versão.
Ocorreu um problema durante o cálculo da actualização.
Isto pode ser causado por:
* estar a actualizar para uma versão de prá-lançamento de Ubuntu
* já ter a versão de pré-lançamento actual
* ter pacotes de software não oficiais,
The same problem occours with Caixa Econômica Federal Internet Banking.
** Attachment added: "msg_cef.png"
https://bugs.launchpad.net/ubuntu/+source/icedtea-web/+bug/1314985/+attachment/4108932/+files/msg_cef.png
--
You received this bug notification because you are a member of Ubuntu
Bugs,
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184262
Title:
times out too early, stuck in PrepareForSleep, causing networ
Phillip
Do you have any news about this bug?
João Franco
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1035018
Title:
Boot error with Scsi Enclosure Services - Ubuntu 12.04
To manage not
@carloslp
You are right, airdriver-ng should be retired - as it is, it seems to be
just causing confusion (as it did to me and to the original reporter) -
it does not work, so either it has to be fixed (if still needed) or
removed.
I was just starting to play with aircrack-ng, and as my card is a
Got the same problem on 14.04:
ii aircrack-ng 1:1.1-6
amd64wireless WEP/WPA cracking utilities
ii gcc 4:4.8.2-1ubuntu6
amd64GNU C compiler
ii gcc-4.8
jsveiga@dell:~$ su
Password:
root@dell:/home/jsveiga# service smbd restart
stop: Unknown job: smbd
start: Unknown job: smbd
root@dell:/home/jsveiga# unset UPSTART_SESSION
root@dell:/home/jsveiga# service smbd restart
smbd stop/waiting
smbd start/running, process 4244
So the start/stop scripts are faili
to
deletion, this is what I would get from 'account-console show ':
joao@tardis:~$ account-console show 1
account: id 1, enabled, provider: google
Global settings:
CredentialsId: 1 ()
auth/mechanism: web_server ()
auth/method: o
running signon-ui with SSOUI_LOGGING_LEVEL=4 (value I've been increasing
until I got more info), I got this:
(note that I've removed some strings that looked a lot like they could
compromise my account security)
service.cpp 222 queryDialog Got request: QMap(("Caption", QVariant(QString,
"Google
Came late to the 13.10 party, upgrading just yesterday, and haven't been
able to login on my google account either with the same error.
However, my google apps account seems to be logged in. Last time I got
an authorization request was a few days ago, well before the upgrade and
haven't gotten an
Hi chenzero,
I have the bug:[drm:gen6_sanitize_pm] *ERROR* Power management discrepancy:
GEN6_RP_INTERRUPT_LIMITS expected 1600, was 1206
My system, a Asus-N55SL laptop, gives
lsb_release -a:
Distributor ID: Ubuntu
Description:Ubuntu 12.04.4 LTS
Release:12.04
Codename: p
Public bug reported:
Amateur radi software called CQRLOG does not work because it has a
conflict with / doesnt let mysql server ( mysql-server-5.5
5.5.34-0ubuntu0.12.04.1) instal. With otjer older versions of cqrlog
an mysql server I han do problem.
Thanks
John
ProblemType: Package
DistroRel
Public bug reported:
En la version de raring 13.04 tenía un perfecto desempeño grafico
(incluso con efectos de compiz activado), a pesar de ser una maquina de
poco hardware. Graficas intel 945GSE mobile.
Tras la posterior actualizacion a saucy 13.10, el desempeño grafico es
pesimo, aunque sigue c
Installed nvidia-319, nvidia-settings-319, nvidia-prime on a ubuntu
13.10 64-bit (unity) (Sony Vaio SBS15127PXB), and it worked perfectly!
glxspheres runnind about 620fps!!! :D
GREAT WORK! Thanks a lot!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
Public bug reported:
doesn't save any progress after closing the game. even within one
session I can't access the 2nd chapter after completing all levels of
1st chapter.
ubuntu version 12.04.3
lmarbles version 1.07
** Affects: lmarbles (Ubuntu)
Importance: Undecided
Status: New
-
1 - 100 of 376 matches
Mail list logo
