@Felix: Thanks for the suggestion. That fixes the the fgl_glxgears
update issue but the whole system still feels slower than before. The
Compiz window repaint problem is still there - it would redraw fairly
often if I move the mouse slowly while moving a window around but if I
start moving it
Both tear-free and Wait for vertical refresh are off - still have very
poor responsiveness and frame rates while moving windows and switching
between applications on my Radeon 5850.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@Felix That's off too. V-sync is off in both Catalyst centre and ccsm,
and tear-free is off too. When I drag windows around my mouse cursor
seems to follow my movement without any problems but the window will
only redraw at around 1-2fps. Running fgl_glxgears gives me fps in the
thousands but the
Confirmed on Radeon 4850 512MB card on Lucid, with a very screwed up
shutdown screen too
--
Lucid: garbled video at boot on radeon 7xxx cards: bad color map due to 16-bit
fb
https://bugs.launchpad.net/bugs/564471
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: origami
On Lucid with Origami 0.7.3-0ubuntu1 the switch -p smp for origami
install does not invoke the SMP client to be installed. This is due to
this section of the script
# running installer on auto-pilot
echo INSTALLING... PLEASE BE PATIENT
I was able to get a WU by manually editing
/var/lib/origami/foldingathome/CPU1/client.cfg so that bigpackets=normal
and adding the following to the end
[clienttype]
memory=4096
type=3
That manually sets the memory it reports (may or may not do anything)
and most importantly sets the -advmethods
Also the option -p smp while installing works because it currently
doesn't do anything at all - the client is run in single thread mode
(see bug #595447). To get the SMP client you must use -p amd64.
--
Origami unable to connect to servers
https://bugs.launchpad.net/bugs/567075
You received this
I've disabled the Legacy support for USB (which also doesn't allow me
to start from a USB stick) and the problem persists.
--
[Dell Inc. Vostro 1320] suspend/resume failure [non-free: nvidia]
https://bugs.launchpad.net/bugs/418852
You received this bug notification because you are a member of
FYI a BIOS upgrade fixed that issue for me, so you should try that too.
But it still is a bug in the kernel (how do I remove network-manager in
the report) since it was working fine in 9.04
--
nm-applet reports Wireless is disabled on Intel 5100 wireless card when it's
switched on
** Bug watch added: Debian Bug tracker #544319
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=544319
** Also affects: network-manager via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=544319
Importance: Unknown
Status: Unknown
** Bug watch added: Linux Kernel Bug Tracker
Public bug reported:
Binary package hint: network-manager
On my Dell Vostro 1320 laptop with Intel 5100 wireless using the iwlagn
driver, nm-applet reports wireless is disabled when the switch is in
the on-position. The switch toggles both wlan and bluetooth and when
using network-manager it
I have a similar problem on Karmic on my Dell Vostro 1320 with Nvidia
Geforce 9300M with 185 driver. When I shut it down it goes past usplash
and ends in a white screen with small vertical coloured line, before
brown splotches develop and it just gets stuck there. I have to manually
hold the power
Public bug reported:
Dist-upgraded from clean-install of Jaunty to Karmic, suspend returns a
flashing cursor with no response to keyboard strokes or mouse input.
ProblemType: KernelOops
Annotation: This occured during a previous suspend and prevented it from
resuming properly.
AplayDevices:
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/30829646/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/30829647/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
I have applied the patch manually on my Jaunty install but it doesn't
seem to do anything? Ubuntu is still oblivious of it in both PC Suite
and Media Transfer mode (Photo mode works, PC Suite pops up a wizard to
tether to 3G).
--
udev rule needed to support Nokia 5800 XpressMusic (attached)
Rob you should try installing it. It works semi-perfectly on my Intrepid
install (250GB SATA drive, 2 partitions, both accessible), except that
it's not added to fstab for some reason and so it's not automatically
mounted. Gparted says it's a 128GB unknown drive but otherwise it works
in nautilus
Intrepid seems to have fixed it now
** Changed in: linux (Ubuntu)
Status: Confirmed = Fix Released
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Public bug reported:
Binary package hint: firefox-3.0
In Firefox 3.0.3 installed from official Intrepid repos SCIM fails to
work. I can't enable SCIM by ctrl+space nor switch IME in SCIM while in
Firefox, but SCIM works everywhere else (tested on gedit, gnome-
terminal). Firefox terminal output
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/18078769/Dependencies.txt
** Attachment added: ExtensionSummary.txt
http://launchpadlibrarian.net/18078770/ExtensionSummary.txt
** Attachment added: profiles.ini.txt
Actually the problem had gone away by itself. Sorry for the trouble.
--
SCIM stops working in Firefox
https://bugs.launchpad.net/bugs/276159
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
problem gone away
** Changed in: firefox-3.0 (Ubuntu)
Status: New = Invalid
--
SCIM stops working in Firefox
https://bugs.launchpad.net/bugs/276159
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Can also confirm this bug with my Sony Ericsson W950 on
2.6.27-3-generic, outputs this in dmesg:
[ 1261.728199] scsi 17:0:0:0: Direct-Access USB Mass Storage Device
PQ: 0 ANSI: 2
[ 1262.251183] sd 17:0:0:0: [sde] 8026112 512-byte hardware sectors (4109 MB)
[ 1262.258279] sd 17:0:0:0:
Not sure but it could be related to bug #62469, in the unusual_devs.h.
--
[regression][intrepid] Cameraphone with sd card doesn't mount sd card, just
phone internal storage
https://bugs.launchpad.net/bugs/273280
You received this bug notification because you are a member of Ubuntu
Bugs, which
Can also confirm bug. i386 2.6.27-3, renders my phone unable to connect
through USB. Did not have this problem in Hardy.
--
Worrying message ata4: EH pending after 5 tries, giving up from dmesg
https://bugs.launchpad.net/bugs/269652
You received this bug notification because you are a member of
I have just dist-upgraded my Hardy install to Intrepid and I bring good
news: it has detected partitions on my RAID0 array. However it only
detected and mounted the first partition, and my second partition is
nowhere to be found. Gparted still display 128GB blank hard drive so
this bug is not
I am currently in Alpha5 LiveCD and there seem to be improvements with
the driver: I can at last see something other than my 2 non-RAID hard
drives in gparted. However instead of the array gparted reports a blank
128GB drive instead of my array, so I don't know what had gone wrong
with the driver.
This is a duplicate of https://bugs.launchpad.net/ubuntu/+source/gnome-
cpufreq-applet/+bug/117105
--
CPU Frequency Applet isn't configurable since Feisty
https://bugs.launchpad.net/bugs/117079
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Re: Robert North
I would test this on the Hardy LiveCD if I could get it to boot (fails
to busybox prompt), but from my gutsy dist-upgraded hardy I'm still
getting the exact same message, and is certainly not fixed. From the
comments it seems like that other people are confirming that it's still
The fix does not fix the problem with RAID, it only fixes the problem
when it's used as an IDE controller
** Changed in: linux (Ubuntu)
Status: Fix Released = Confirmed
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification
I can confirm no.1, I was wondering why SCIM didn't show up on my fresh
Gutsy install. Never seen no.2 though.
--
[Gutsy Feisty Edgy Dapper] language-support-any CJK language doesn't set up a
way to input this language with scim if the session doesn't correspond to this
particular CJK
From my dist-upgraded gutsy where the fix wasn't applied, no, and
applying the fix gives me governors when you left-click the applet,
which was previously absent. I'll try on the Gutsy LiveCD later to see
if it's fixed on vanilla gutsy.
--
Cannot select governor from cpufreq-applet
I've found the solution on Chinese Ubuntu forums on
http://forum.ubuntu.org.cn/viewtopic.php?p=479741sid=c37de1d11989db6ebe95227b35efa770#479818
,
which say
sudo apt-get install scim-bridge
sudo gedit /etc/X11/xinit/xinput.d/scim
change GTK_IM_MODULE=xim into GTK_IM_MODULE=scim-bridge
and
I've found the solution on Chinese Ubuntu forums on
http://forum.ubuntu.org.cn/viewtopic.php?p=479741sid=c37de1d11989db6ebe95227b35efa770#479818
,
which say
sudo apt-get install scim-bridge
sudo gedit /etc/X11/xinit/xinput.d/scim
change GTK_IM_MODULE=xim into GTK_IM_MODULE=scim-bridge
and
Sorry wrong place...
--
[Gutsy Feisty Edgy Dapper] language-support-any CJK language doesn't set up a
way to input this language with scim if the session doesn't correspond to this
particular CJK (Chinese, Japanese or Korean) language
https://bugs.launchpad.net/bugs/34282
You received this bug
I have the exact same problem with Gutsy. Both SCIM and dead keys work
back in Feisty and then I dist-upgraded to Gutsy back in beta and both
broke.
--
[Gutsy Feisty Edgy Dapper] language-support-any CJK language doesn't set up a
way to input this language with scim if the session doesn't
Public bug reported:
Binary package hint: gnome-cpufreq-applet
By default, the cpufreq-applet cannot change the governor setting from
itself and AFAIK there is no other way to change it in GUI in GNOME. A
simple sudo chmod +s /usr/bin/cpufreq-selector would solve the problem
and I remember
Public bug reported:
Installed Feisty beta using the x86 alternate CD as the LiveCD crashes at
gparted stage, it is able to detect my IT8212 based (GigaRAID) RAID 0 array and
wrote it in my /etc/fstab. But upon the first desktop boot it cannot be found
anymore with all the kernels from -11 (I
** Attachment added: Output of lspci -v
http://librarian.launchpad.net/7335796/lspci%20-v.txt
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
** Attachment added: /etc/fstab
http://librarian.launchpad.net/7335799/fstab.txt
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
** Attachment added: sudo lspci -vvnn
http://librarian.launchpad.net/7338252/lspci-vvnn.log
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
** Attachment added: uname -a
http://librarian.launchpad.net/7338254/uname%20-a.txt
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
** Attachment added: dmesg
http://librarian.launchpad.net/7338253/dmesg.log
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing
42 matches
Mail list logo
