Public bug reported:

Binary package hint: gnomebaker

I am running 7.04 Feisty, standard versions of gnomebaker and wodim from the 
repository. I have a lenovo thinkpad t60.
when I try to burn a CD using gnomebaker it fails (output follows). the strange 
thing is that I can blank a CDRW from gnomebaker, 
and even weirder is the fact that burning the very same ISO from the command 
line

wodim dev=/dev/cdrw driveropts=burnfree fs=14M speed=4 -raw96r -eject -v
xyz.iso

running gnomebaker as root, or setting both gb and woodim SUID (as the error 
message seemingly suggests) didn't help.
since burning from the command line works fine, it seems it is gnomebaker's 
fault, maybe some nonstandard parameter 
used in calling wodim.

I found references to this same problem here and there in the forums, so I 
thought to file a bug.
any help or hint is appreciated. 

michele ceriotti


relevant logs follow.
##################################################################
$ hdparm /dev/sr0
/dev/sr0:
 IO_support   =  0 (default 16-bit)
 readonly     =  0 (off)
 readahead    = 256 (on)
 HDIO_GETGEO failed: Inappropriate ioctl for device
##################################################################
$  wodim -checkdrive dev=/dev/sr0
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4083N'
Revision       : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
##################################################################
GNOMEBAKER ERROR LOG
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
scsidev: '5,0,0'
scsibus: 5 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4083N'
Revision       : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) 
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 12699 kB/s 72x CD 9x DVD
FIFO size      : 12582912 = 12288 KB
Speed set to 706 KB/s
   4 seconds.   3 seconds.   2 
seconds.   1 seconds.   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 9B 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 40s
wodim: The current problem looks like a buffer underrun.
wodim: It looks like 'driveropts=burnfree' does not work for this drive.
wodim: Please report.
wodim: Make sure that you are root, enable DMA and check your HW/OS set up.

write track data: error after 317440 bytes
Writing  time:   14.751s
Average write speed 213.1x.
Fixating...
Fixating time:   79.486s

** Affects: gnomebaker (Ubuntu)
     Importance: Undecided
         Status: Unconfirmed

-- 
in feisty, gnomebaker cannot burn CD whereas wodim can
https://bugs.launchpad.net/bugs/116322
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to