Public bug reported:

Binary package hint: k3b

System
-----------------------
K3b Version: 1.0

KDE Version: 3.5.6
QT Version:  3.3.7
Kernel:      2.6.20-16-generic
Devices
-----------------------
HL-DT-ST CD-ROM GCR-8523B 1.01 (/dev/hdd, ) [CD-ROM] [CD-ROM] [None]

HL-DT-ST DVDRAM GSA-H10N JL10 (/dev/hdc, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, 
DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, 
DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted 
Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, 
CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, 
Restricted Overwrite, Layer Jump]
Used versions
-----------------------
cdrecord: 1.1.2

cdrecord
-----------------------
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-H10N '
Revision       : 'JL10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 14209 kB/s 80x CD 10x DVD
FIFO size      : 12582912 = 12288 KB
Speed set to 4234 KB/s
Track 01: data   694 MB        
Total size:      797 MB (79:02.53) = 355690 sectors
Lout start:      798 MB (79:04/40) = 355690 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  ATIP start of lead in:  -11674 (97:26/26)
  ATIP start of lead out: 359848 (79:59/73)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 23
Manufacturer: SKC Co., Ltd.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 4158
Starting to write CD/DVD at speed  24.0 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  694 MB written.
Track 01:    1 of  694 MB written (fifo  99%) [buf  56%]   0.8x.
Track 01:    2 of  694 MB written (fifo 100%) [buf  99%]  25.8x.
Track 01:    3 of  694 MB written (fifo 100%) [buf  99%]  17.0x.
Errno: 0 (Success), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 07 25 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 10 E3 92 8F 80 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error 
(ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.026s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 3745792 bytes
Writing  time:   17.054s
Average write speed 279.1x.
Min drive buffer fill was 56%
Fixating...
Fixating time:   20.056s

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/hdc speed=24 -tao driveropts=burnfree 
-eject -data -tsize=355688s -

** Affects: k3b (Ubuntu)
     Importance: Undecided
         Status: New

-- 
image doesnt burn
https://bugs.launchpad.net/bugs/135283
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to