Sorry to necro this thread, however i cannot get a sparklan WUBZ-103
(Fiberline WL-430U) working in Ubuntu.
I have a large thread on
http://ubuntuforums.org/showthread.php?t=1063274 2nd page post 16 onard
has a lot of pertinent information.
dmesg [ 1542.81] usb 1-1: new full speed USB device
Thanks for testing and the update. I'll tentatively mark this Fix
Released for Intrepid. Carlos, since you are the original bug
reporter, if this is not resolved for you with Intrepid, please reopen
this by setting the status back to New. Thanks.
** Changed in: linux (Ubuntu)
Status:
Fixed in Interpid. I can establish a connection now.
--
USB Wireless zd1211 based not working in hardy's kernel
https://bugs.launchpad.net/bugs/227149
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the
upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would
appreciate it if you could please test this newer 2.6.27 Ubuntu kernel.
There are one of two ways you should be able to test:
1) If you are comfortable
My hardy install has just developed this bug.
It was working without error then I upgraded my computer with a new motherboard
and CPU
it was working previously with an old abit nf7-s and amd 2500+ processor
put in new gigabyte ma-ga78gm-s2h with amd X2 5600
and now this starts happening anywhere
I have this bug too.
When zd1211rw module is loaded, I have a eth1 interface. I can configure it
freely, but I cannot establish a conection.
Switching to ndiswrapper driver helps: I get a wlan0 interface and the
connection works (at least in 802.11b mode).
Dmesg output is attached.
**
Hi guys.
i was working on this. i have about 4 kernel updates in the past 2
months (2.6.24.16 to 2.6.24.19) and nothing solve the problem.
I'd tried to use the upcoming ubuntu 8.10 beta kernel 2.6.25 and i just
broke my instalation. The problem still present.
someone has been able to solve the
I can say that up to me the problem is solved.
See here:
https://bugs.launchpad.net/ubuntu/+source/linux-
source-2.6.17/+bug/63664/comments/35
--
USB Wireless zd1211 based not working in hardy's kernel
https://bugs.launchpad.net/bugs/227149
You received this bug notification because you are a
Same problem: ZyXEL G-220-v2 USB wireless worked in Ubuntu 7.10
but not in booting up 8.04 Live CD. I use WPA2 encryption.
It appears to associate with AP but cannnot ping it, and wpa_cli output
indicates it loses connection:
=== wpa_cli ===
# wpa_cli status
Selected interface
Hi Guys,
Just to see if it makes a difference, care to test the upcoming Intrepid
Ibex 8.10 kernel? It was most recently rebased with the upstream 2.6.25
kernel and is currently available in the following PPA:
https://edge.launchpad.net/~kernel-ppa/+archive
If you are not familiar with how to
Hello, I have the same problem.
USB wireless with zd1211rw driver, statically configured wireless
network - no NetworkManager.
Randomly at boots I get the 'link not ready message' and the network is
down. Other times it works just fine. I had no problem with Gutsy, now
I'm using Hardy with all
Hi Leann
here is my lsusb and full dmesg.
lsusb output
Bus 002 Device 003: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi
Bus 002 Device 002: ID 041e:4058 Creative Technology, Ltd
Bus 002 Device 001: ID :
Bus 001 Device 001: ID :
** Attachment added: dmesg.txt
Hi Carlos,
Just curious if you can provide the output of lsusb as well as your full
dmesg output. Thanks
** Changed in: linux (Ubuntu)
Status: New = Incomplete
--
USB Wireless zd1211 based not working in hardy's kernel
https://bugs.launchpad.net/bugs/227149
You received this bug
13 matches
Mail list logo
