Same here with with Karmic on an Acer Aspire 7520 which sports an AR5007EG
which is currently incorrectly identified as an AR5001?
Symptoms: Wireless is up and running essentially out of the box, however on
transfers, performance is very poor (500KB/s). Samba stalls every time with
Same here with fully updated Lucid and Dlink DWL-G520.
--
juanty ath5k : disconnection / slow network
https://bugs.launchpad.net/bugs/369005
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
On Karmic, I've got the same problems.
The first message in dmesg is:
ath5k phy0: unsupported jumbo
Followed by a long list of:
ath5k phy0: noise floor calibration timeout (2437MHz)
I'm on Karmic and this seems to have been improved a lot over recent
days. I have linux-backports-modules-karmic installed and I'm
downloading at 300-700KB/s in my university where I would only get
2-15KB/s a week or two ago.
--
juanty ath5k : disconnection / slow network
I’m still experiencing these problems after the upgrade to the Karmic
RC. Wifi is slow and the „unsupported jumbo“ errors show up in the log.
--
juanty ath5k : disconnection / slow network
https://bugs.launchpad.net/bugs/369005
You received this bug notification because you are a member of
Nothing new ? i also experiencing the same trouble with kernel 2.6.28-15, on
jaunty.
My card is a dlink dwl-g520+, chip atheros ar5001x+
Using linux-backports-modules does not solved my issues :S
Got a infinite loop of connection/deconnection, so using the wifi is
impractical !
--
juanty ath5k
Same messages here:
ath5k phy0: unsupported jumbo
I also get this message sometimes:
ath5k phy0: noise floor calibration failed
I'm on jaunty and initially I couldn't even connect to my AP at home. It
wasn't until I changed to a free channel I could connect. Now I have a
full connection but
I am seeing the same errors (unsupported jumbo) and poor wifi performance on a
good network with
Karmic/Mythbuntu Alpha 6. The hardware is Acer Revo 3600
lspci -vv
05:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless
Network Adapter (rev 01)
Subsystem: Foxconn
same here
** Attachment added: dmesg
http://launchpadlibrarian.net/28892666/dmesg
--
juanty ath5k : disconnection / slow network
https://bugs.launchpad.net/bugs/369005
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Installed linux-backports-modules and now using ath_pci : working fine.
--
juanty ath5k : disconnection / slow network
https://bugs.launchpad.net/bugs/369005
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I confirm the same behavior.
ath5k phy0: unsupported jumbo
ath5k phy0: noise floor calibration timeout (2412MHz)
ath5k phy0: noise floor calibration failed (2417MHz)
ath5k phy0: noise floor calibration timeout (2422MHz)
What is odd for me here at home is that in my kitchen where this laptop
Is there any thing I can do to help debug this problem ? (like testing kernels,
testing patches, ...)
I'm not a kernel programmer, but I do programming for a living (mostly c++), so
I should be able to do basic things if necessary.
--
juanty ath5k : disconnection / slow network
I can confirm this. I WLAN does work, but is definitely way too slow.
dmesg lists the same “unsupported jumbo” errors.
My card:
02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg
Wireless PCI Express Adapter (rev 01)
Subsystem: AMBIT Microsystem Corp. Device 0428
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/26110719/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/26110720/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/26110721/Dependencies.txt
**
14 matches
Mail list logo
