[Expired for ekiga (Ubuntu) because there has been no activity for 60
days.]
** Changed in: ekiga (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/378403
Ti
Back again: I had the same issue again: First call after a fresh start of ekiga
works fine, but the second simply has no incoming audio..the status bar is
showing this:
A: 8.0 / 0.0
So there is no incoming audio.
My sip provider is netappel.fr by the way. So there might be a chance that the
pro
Ok, the lucky part of post #15 is nil.
I have seen that in alsamixer (the terminal version) all channels were on mute
although I didn't mute anything.
After unmuting the audio in and output ekiga found its voice again.
Now I am not sure if this has been my problem all the way long or not. I
will
I tried to install the patched version but failed..the official version
was still being installed as far as I can tell.
The subsequent calling issue seems to be gone though on Lucid.
Confirmation is needed as I just might have been lucky.. :-).
cheers.
--
1st call after launch of ekiga works pe
Hi,
We have a patch wich modify the network part of the audio and video
streams when behind a NAT. As this is the case here (after a quick
look), this patch might solve the issue. Would you be kind enough to
test it?
Get Ekiga 3.2.6 for Karmic with this patch here (same code as Ekiga 3.2.6 with
Hi all,
I am having the same problem: ekiga does the first call all right, then for a
second or third call the incoming audio is gone. There is not even the ringing
tone..
I ran ekiga -d 4 2>output.txt.
my system:
ekiga 3.2.5 on 9.10 (2.6.31-17-generic, IBM Thinkpad T42)
** Attachment added:
** Changed in: ekiga (Ubuntu)
Importance: Undecided => Low
--
1st call after launch of ekiga works perfectly, but after it's impossible to
call, I had to close ekiga and restart it...
https://bugs.launchpad.net/bugs/378403
You received this bug notification because you are a member of Ubuntu
Hi,
Thank you for reporting.
Please attach a debug output:
Open a terminal and start ekiga using this command:
$ ekiga -d 4 2>output.txt
Wait until the registration succeed. Place the first call which will succeed.
Place the second call which will fail. Close Ekiga.
The output.txt file contains
I am experiencing the same issue. I am behind a NAT (wifi router) and
have a SIP account with ekiga.net
I can hear audio only on the first call when i try dialing out on Ekiga.
Subsequent calls dont work. I did try this with Twinkle and it worked
perfectly on multiple calls back-to-back.
The only
** Changed in: ekiga (Ubuntu)
Status: Incomplete => Fix Released
--
1st call after launch of ekiga works perfectly, but after it's impossible to
call, I had to close ekiga and restart it...
https://bugs.launchpad.net/bugs/378403
You received this bug notification because you are a member
OK thank bug closed !
Yannick Defais a écrit :
> Ok, I see.
>
> If you wish, you can set up the port range Ekiga use:
> http://wiki.ekiga.org/index.php/Internet_ports_used_by_Ekiga#Changing_Ports
>
> Is there any remaining issue with Ekiga? Can I close this bug?
>
> Best regards,
> Yannick
>
>
--
Ok, I see.
If you wish, you can set up the port range Ekiga use:
http://wiki.ekiga.org/index.php/Internet_ports_used_by_Ekiga#Changing_Ports
Is there any remaining issue with Ekiga? Can I close this bug?
Best regards,
Yannick
--
1st call after launch of ekiga works perfectly, but after it's im
Yes it works no problems, but i have 2 sip providers
Annatel and Free
And 2 computers need to use it
If i install ekiga onto 2 computers, it's impossible because i need to
trigger on 1 computer to make it works...
Then the trigger work on the first computer but not on the other... I
will need
Hi,
I personally tested Ekiga 3.2.0 which comes with ubuntu Jaunty (9.04)
with free.fr and I can assure you it works with the SIP service.
Can you try it?
Best regards,
Yannick
--
1st call after launch of ekiga works perfectly, but after it's impossible to
call, I had to close ekiga and resta
ok, i think the problem is with annatel the sip provider..
I made a change to the internet provider (trigger the port) and by now
it seems ok, but it's not a good solution, because, i can use ekiga on 1
computer that's all, we have 2 computers to use it, and with this
triggering it's over.
The
Hi,
Please stick to english, we are not the only ones to read this.
Thank you for your answer, still i'm not sure what the issue is.
Your issue seems related to NAT configuration using Ekiga.
It seems Twinkle (?) can handle that better than Ekiga, right? Why
exactly? Was ekiga failing handling
Bonjour, en fait je ne sais pas si le problème ne vient pas directement
d'annatel
J'ai du changer le reroutage des ports chez free, et cela marche un peu
mieux, mais pas génial...
Redirections de plages de ports:
Début Fin Protocole Destination
Hi,
Thank you for reporting. I'm a bit confused here. Can you be more
specific in the issue you're facing?
Is the issue a long delay in audio?
Best regards,
Yannick
** Changed in: ekiga (Ubuntu)
Status: New => Incomplete
--
1st call after launch of ekiga works perfectly, but after it's
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/26944137/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/26944138/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/26944139/ProcStatus.txt
--
1st ca
19 matches
Mail list logo