I'm confused -- tried to read the thread in full but seem to find
conflicting advice. I just installed Lucid for netbooks on my Medion
Akoya MD97690.
I had trouble with the USB-stick installation, but I resolved it by
installing with the kernel mode options nomodeset noapic set --
Okay, I feel very dumb right now, but I fixed my webcam. Duh. There is
a keyboard hardware-switch combo to turn it on or off. Fn+F6 (blue
picture of a webcam is superimposed on F6) and you're good to go. This
is on a Medion Akoyo E131x-series notebook.
--
regression: uvcvideo module makes
Also confirm fix: MSI U100, used to have exact same issue, now
(2.6.31-20-generic) removed the blacklist and camera and USB work fine.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
Hi,
Do you get the cannot reset port error?
Do you have your whole USB system down after the error? This means USB
devices like pen drives will not work.
If not, yours is probably a different issue. Also note that yours is a
different webcam. You may search if uvcvideo has any issue with this
Hi,
I think this bug is not that I refer. my usb works correctly.
sorry.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member
Linux jjchico-netbook 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12
05:23:09 UTC 2010 i686 GNU/Linux
This one works right for me in my MSI Wind U100. Your kernel is 64
bits. What netbook is that? That is not a MSI U100 or clone for sure.
2010/3/21 lemmy lem...@gmail.com:
Hi,
this bug appears
Hi,
I have Dell inspiron 1720 laptop. This issue appears again with message:
(20.021050) uvcvideo: failed to query (129) UVC probe control: -32( exp. 26)
uname -a
Linux 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 x86_64
GNU/Linux
lsusb
Bus 002 Device 003: ID 05a9:2640
This bug was just originally affecting msi wind u100 netbooks, it
seems the regression has expanded or more people are just reporting
the bug
On Mar 21, 2010, at 4:01 PM, lemmy lem...@gmail.com wrote:
Hi,
I have Dell inspiron 1720 laptop. This issue appears again with
message:
(20.021050)
I was having these issues on my MSI Wind U100 using Mint Helena, and
went as far as rebuilding with Ubuntu Karmic with some problem. I
eventually restored my Mint build. After updating to 2.6.31-20-generic-
pae the problem went away.
--
regression: uvcvideo module makes cannot reset port error
Hi,
this bug appears again after 2.6.31-20.58 kernel update. I think that is a
regression.
uname -a
Linux 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 x86_64
GNU/Linux
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB
JFYI: U100, BIOS 10g, 2.6.31-20-generic, Bison webcam works (when uvcvideo
is loaded) in cheese and gstreamer-properties test, Fn+F6 is never touched
(red lamp turns on automagically when program starts).
On Sun, Mar 7, 2010 at 09:44, Dmitri Petros
radjahshelld...@yahoo.com.auwrote:
I'm on a
I have an MSI U100. To resolve the webcam issues I needed to do the following:
1. Flash update of the BIOS from the MSI website
2. Clean install of UNR 9.10
3. Open up the video settings - sudo gstreamers-properties
4. Set the video output setting to X Window System (X11/XShm/Xv) [This sets
the
Upgraded to kernel 2.6.31.20-generic, using the Update Manager. My BIOS
was already the latest available (1.0G). I tested the webcam first in
CrunchBang Linux to make sure it was enabled on my U100. Rebooted into
UNR 9.10, checked to make sure uvcvideo wasn't still blacklisted (I had
done that
nop, 2.6.31-20 also not working for me
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Kernel Update to 2.6.31-20 fixed it for me. No need to temper with
gstreamer.
I'm using Bios revision 10B. Maybe that is the reason for it working for some
and not for others?
@Eamon Collins: Which bios revision do you use?
--
regression: uvcvideo module makes cannot reset port error on usb
In general, sudo rmmod uvcvideo/sudo modprobe uvcvideo makes me happy.
If I need a USB service and it fails, I knock out the driver. If I want
webcam (quite a rare occasion), I load it back.
On Sat, Mar 6, 2010 at 22:17, libertarian david.treum...@freenet.de
wrote:
Kernel Update to 2.6.31-20
I should have noted in my earlier post that although webcam still
doesn't work, usb ports do without having to blacklist uvcvideo. It's
interesting that libertarian's camera now works, and he/she has an older
BIOS than I do. libertarian, are you running the camera on Cheese?
--
regression:
@Michael: He :)
The camera works with Cheese without a hitch.
lsusb shows that the USB-ports continue working after activating the camera via
Fn-F6 and a mounted USB-stick keeps on working, too.
Although If I remember correctly the camera once did this even before I
installed the new Kernel.
Works here with 2.6.31-20-generic and BIOS 10G. I also have the
prerelease updates set in sources... fwiw.
Both webcam (in cheese and skype) and usb (thumb drives, etc) work and
have since 2.6.31-20
Michael Fox wrote:
Upgraded to kernel 2.6.31.20-generic, using the Update Manager. My BIOS
I'm on a U100 without an updated bios, did a clean install a few days
back, updated from the standard repositories only, added firewall,
virus, medibuntu, cheese and not much else, and everything is working
fine. I've got both USB and camera.
--
regression: uvcvideo module makes cannot reset
This bug was fixed in the package linux - 2.6.31-20.57
---
linux (2.6.31-20.57) karmic-proposed; urgency=low
[ Kees Cook ]
* SAUCE: x86: brk away from exec rand area
- LP: #452175
[ Keng-Yu Lin ]
* SAUCE: (drop after 2.6.31) input: Add hotkey quirk for Samsung
Shouldn't this be assigned to the Ubuntu kernel team and not the
Canonical kernel team? Just want to make sure it is assigned properly so
that it doesn't get looked over.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
I think canonical should handle this and get msi on board for
support. Msi wind is not even certified unlike aspire one
On Feb 24, 2010, at 1:44 PM, luke.varnadore
luke.varnad...@gmail.com wrote:
Shouldn't this be assigned to the Ubuntu kernel team and not the
Canonical kernel team? Just
** Changed in: linux (Ubuntu)
Status: Fix Released = Fix Committed
** Changed in: linux (Ubuntu)
Status: Fix Committed = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
** Changed in: linux (Ubuntu Karmic)
Status: Fix Committed = In Progress
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
** Changed in: linux (Ubuntu Karmic)
Status: In Progress = Fix Committed
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
On Thu, Feb 18, 2010 at 10:49:47PM -, mzc wrote:
Hi steve,
Is the fix still in -proposed?
I haven't followed the progress of this bug, and can't tell you offhand; but
that would certainly not affect the status of the release notes task.
--
Steve Langasek Give me a lever
** Changed in: ubuntu-release-notes
Status: Fix Released = Incomplete
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
please don't change bug status without explanation.
** Changed in: ubuntu-release-notes
Status: Incomplete = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You
Hi steve,
Is the fix still in -proposed?
On Feb 18, 2010, at 2:38 PM, Steve Langasek steve.langa...@canonical.com
wrote:
please don't change bug status without explanation.
** Changed in: ubuntu-release-notes
Status: Incomplete = Fix Released
--
regression: uvcvideo module makes
I agree with expos' comment #308, this fix is only committed but not
released. I feel free to reset the flag from Released to Committed.
If somebody needs to revert it to Released, please comment why.
By the way, this fix was part of upstream Linux 2.6.31.9 and some hours
ago in the Ubuntu kernel
@ Steve Langasek / Jeremy Foshee
Why did you mark this bug with a Fix Released tag for Ubuntu Karmic? I'm just
a normal end-user, and so I'm still on kernel 2.6.31-19-generic as there
where no newer kernel provided in the updates-repository. In my opinion a fix
is released when it reaches the
Can anyone confirm that this bug was fixed so i can finally upgrade to
Karmic?
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
the fix mentioned in the thread is still in -proposed which means its
not yet confirmed/certified. better to wait until its really released.
On Mon, 2010-02-15 at 01:15 +, luis.nando wrote:
Can anyone confirm that this bug was fixed so i can finally upgrade to
Karmic?
--
regression:
** Changed in: linux (Ubuntu Karmic)
Status: Fix Released = Fix Committed
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
** Changed in: linux (Ubuntu Karmic)
Status: Fix Committed = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
After recent upgrade my camera stoped working on MSI Wind U100. It
worked fine before. Now Fn-F6 is not recognized.
** Attachment added: dmesg.log
http://launchpadlibrarian.net/39096482/dmesg.log
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam
setting top level tag for the kernel to Fix Released as it was
overlooked.
-JFo
** Changed in: linux (Ubuntu Karmic)
Status: Fix Committed = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
** Branch linked: lp:ubuntu/linux-fsl-imx51
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member of Ubuntu
Bugs, which is
swl [2010-02-06 20:51 -]:
Is there any indication about how long this make take before the next
kernel with patch is available?
Just accepted from the proposed queue, will take some time to build
now.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam
Martin Pitt martin.p...@ubuntu.com wrote:
swl [2010-02-06 20:51 -]:
Is there any indication about how long this make take before the next
kernel with patch is available?
Just accepted from the proposed queue, will take some time to build
now.
What is keeping the bugfix from making it
Stephan Diestelhorst [2010-02-08 11:26 -]:
What is keeping the bugfix from making it into the normal updates?
The entire kernel update needs to be verified first before it can go
to -updates. Unfortunately the security update got in between.
--
regression: uvcvideo module makes cannot
** Changed in: linux (Ubuntu)
Status: Fix Released = Fix Committed
** Changed in: linux (Ubuntu)
Status: Fix Committed = Incomplete
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
** Changed in: linux (Ubuntu)
Status: Incomplete = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member of
Last normal kernel update (2.6.31-20-generic) fixed again USB and
webcam.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member
My goodness, why can they bloody well include the fix in the new
kernels. We all thought that it would be in .16, but now we are at .19
and still no fix.
FIX IT ! It is long overdue. And no, I don't feel like building my
own kernel to fix it myself, just to have a .20 or .21 update with the
Hi,
I found the brightness bug solution for the new kernel at
http://linux.bitbaro.hu/en/2010/01/22/msi-wind-u100-and-ubuntu-9-10
-karmic-koala/ , but cannot fix the webcam problem yet. Is there anyway
for solving this bug before new kernel release? (I've looked for it in
the previous comments,
This really is crap. Ubuntu users have to make a choice between basic
hardware functionality and security now?
For a really simple workaround (which assumes you previously installed
2.6.31-18 from proposed, and that may leave you insecure), hold down
shift as you boot so that the grub menu
@wolfgang:
You're probably right. Yes, the patched -18 kernel is in proposed, and
-19 comes from security. That explains it. I hope the next kernel
release (-20?) when -18 makes it on updates will include the patch for
this bug, and the security patches from -19.
--
regression: uvcvideo module
Is there any indication about how long this make take before the next
kernel with patch is available?
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug
Installed the new kernel upgrade and now my USB ports no longer work
again. Why didn't you include the fix in the official kernel?
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You
I guess the security issue weighs more important than the bug.. I just
hope the bug fix can be rolled out on the next patch.
On Sat, 2010-02-06 at 22:02 +, DustWolf wrote:
Installed the new kernel upgrade and now my USB ports no longer work
again. Why didn't you include the fix in the
This bug is reinstated on 2.6.31-19-generic. :(
Webcam and usb are not working again. Had to revert back to
2.6.31-18-generic.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You
Did you xheck if the switch is off?
On Feb 5, 2010, at 8:46 AM, Giannis giannis...@gmail.com wrote:
This bug is reinstated on 2.6.31-19-generic. :(
Webcam and usb are not working again. Had to revert back to
2.6.31-18-generic.
--
regression: uvcvideo module makes cannot reset port error
2.6.31-19 didnt work here either. couldnt test the 18 version but 19
doesnt work even with camera turned on.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug
@ mzc :
Yes. Webcam is not working at all. Bluetooth is not working if it's
switched off at boot. Any usb device that is not already plugged in at
boot will not work. (usb hotplug not working).
Basically, it's exactly the same bug. I think the patch that fixed this
in 2.6.31-18, was omitted from
Look like a minor oversight. Hopefully it gets corrected soon
On Feb 5, 2010, at 10:03 AM, Giannis giannis...@gmail.com wrote:
@ mzc :
Yes. Webcam is not working at all. Bluetooth is not working if it's
switched off at boot. Any usb device that is not already plugged in at
boot will not
Could it be that the latest kernel -19 is based on 2.6.31-16.52 (was
predecessor on karmic-security) and not on 2.6.31-18.55 which fixed this
but never made it from karmic-proposed to -updates?
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203):
Could it be that the latest kernel -19 is based on 2.6.31-16.52
(update: .53?) (was predecessor on karmic-security) and not on
2.6.31-18.55 which fixed this but never made it from karmic-proposed to
-updates?
http://packages.ubuntu.com/karmic-updates/allpackages?format=txt.gz
...in
For your information: Im running Ubuntu 10.04 Alpha2 on the LG X110 - (a
rebranded MSI Wind).
The Bisoncam now works like a charm, the videoresponse on 1280x1024 is faster
than before and the USB Ports are stable.
I would call this Bug fixed for the next Release.
--
regression: uvcvideo
** Changed in: linux (Ubuntu)
Status: Fix Released = Fix Committed
** Changed in: linux (Ubuntu Karmic)
Status: Fix Committed = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
please don't change bug statuses without explanation.
** Changed in: linux (Ubuntu)
Status: Fix Committed = Fix Released
** Changed in: linux (Ubuntu Karmic)
Status: Fix Released = Fix Committed
--
regression: uvcvideo module makes cannot reset port error on usb with bison
2.6.31-18-generic on i686 on MSI WIND U100 12, webcam UVC 1.00 device
BisonCam, NB Pro...
USB ports now work fine. Did not test webcam.
Please make fix official for all nonexpert users. :)
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB
So, custom 10.G firmware installed on Roverbook Neo U100 (MSI Wind U100
re-branded).
VideoCam is ok (in cheese), USB devices (mouse, disks) are ok, brightness
problem gone, Wi-Fi and BT are switched on/off separately.
Kernel: 2.6.31-18-generic
On Sun, Jan 17, 2010 at 07:18, Cliff Haas
** Changed in: linux (Ubuntu Karmic)
Status: Fix Committed = Fix Released
** Changed in: linux (Ubuntu Karmic)
Status: Fix Released = Fix Committed
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
Everything working good so far with freshly upgraded karmic on
2.6.31-18, LG X110-L.A7SAG (MSI Wind Clone Netbook with a Bison webcam,
uvcvideo removed from /etc/modprobe.d/blacklist.conf). Comment #278
talks about a webcam brightness problem, I've got a real dark picture
here, too (before and
BTW, there is a custom version of 10.G with modified kbd actions:
http://msiw.ru/forum/25-819-13561-16-1263232682
The most interesting is the use of Fn+F11 to switch Wi-Fi solely and
Ctrl+Fn+F11 to switch BT (that means no interrupts in Wi-Fi while switching
BT on or off).
I make use the previous
@ Robin Becker
I also have an U100 and I have four state control with Fn+F11 too - but the
Blue Tooth led doesn't work anymore :-(, may be it's broken?.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
@Anders: this is most probably a different issue so you should report a
separate bug. If your USB system does not hang then it is definitively a
different bug.
@Robin, Sebastian: I would open a different bug for wifi/bt led issues.
I have never seen this problem in my U100-026E. There is a new
Kernel 2.6.31-18 from karmic propose fixed the problem with Bison cam and USB
ports on my MSI U90 here in DK
tnx
Vognstrup
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You
Known problems with Terra mobile 10go! (like Akoya / MSI Wind) are fixed. Many
thanks
to all who have made a man happy with this Kernel - Update.
thx
Whitelight
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
Can anyone with a U100 confirm whether this fixes the Fn+F11
wifi/bluetooth state problems. Under 8.10 I have Fn+F11 being a four
state control; whereas under 9.04/9.10 it appears to be only two state
and the bluetooth led nevers seems to appear.
--
regression: uvcvideo module makes cannot reset
I have an U100 and I have four state control with Fn+F11. The Blue Tooth
functions again as it did under 8.10.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug
Linux kernel 2.6.31-18 fixes USB camera bug, but bightness problem still
persists...
--
-jno
Tiger got to hunt, bird got to fly; Man got to sit and wonder, 'Why, why,
why?' Tiger got to sleep, bird got to land; Man got to tell himself he
understand. K,Vonnegut
--
regression: uvcvideo module
Sorry to ruin the celebrations but the released fix does not appear to
fix the incarnation of the bug reported in comment 141 (
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/435352/comments/141
)
A Xbox Live USB camera connected at boot does not get recognized,
(cheese shows the test
The kernel 2.6.31-18 from karmic proposed fixed the problem with the webcam
0c45:62c0 Microdia Sonix USB 2.0 Camera in my MSI U100.
Thanks a lot to all the people involved!
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
Webcam and usb on my TargaTraveller works now as it used to work.
Thanks to the people who worked on this fix!
Jaap.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received
The 2.6.31-18 kernel from -proposed fixed it for me too on my MSI U100
with Microdia Sonix USB 2.0 Camera(0c45:62c0). Thanks to everyone
helping to make this work!
Manuel
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
Just pulled kernel from karmic-proposed -- it fixes my problem with the
Logitech camera reported here
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/435352/comments/60
Thanks!
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and
** Tags added: verification-done
** Tags removed: verification-needed
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member of
@Martin Pitt:
linux-image generic works. Took it from #265
linux-headers won't work - depencies prob. Tried all out from #265
Any suggestions?
thx
knuutsen
msi wind u100 lux (european version)
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203):
I've got -proposed enabled but have not seen a new kernel tick through
yet?
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member
it's been compiled and made into packages. The packages need to be
manually approved before they are included in -proposed from what I can
gather. It is possible to manually pull them down. I may try that
later today.
--
regression: uvcvideo module makes cannot reset port error on usb with
This afternoon i tried to update my u90 bios with the 10G version
(following the steps listed at https://bugs.launchpad.net/ubuntu/+source
/hal-info/+bug/415023/comments/265) and both brightness
(https://bugs.launchpad.net/ubuntu/+source/hal-info/+bug/415023) and
webcam bugs seem to be fixed.
I
added kernel packages manually. cheese (webcam app) works as well as
usb (usb stick). brightness still flakey. Is that verification? (using
i386 version)
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
where can i find that kernel package to add it manually?
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member of Ubuntu
Bugs,
I went to https://launchpad.net/ubuntu/+source/linux/2.6.31-18.55
about the middle of the page is a section entitled Publishing
clicking on 'i386' brings up another page that includes all the new built
packages
--
regression: uvcvideo module makes cannot reset port error on usb with bison
Thanks for the info! Although when i checked for that, i found the
kernel already in proposed. And so i can say too, the kernel version
2.6.31-18-generic on i686 does allow the use of the webcam und usb-
devices, finally.. Great stuff!
--
regression: uvcvideo module makes cannot reset port error
Just installed the new kernel 2.6.31-18; webcam and usb now work on my msi wind
u100 with ubuntu 9.10. The refresh rate of camera looks a bit slower than
before (but it is only my feeling).
Thanks,
marco
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam
Yep. Works for me on a U100. I enabled proposed, updated through update
manager, restarted, removed the blacklist.conf entry, restarted again,
swore at the computer a lot until I realised I also had to turn the
camera on via Fn F6, and then took a whole lot of photos of myself
grinning stupidly
Accepted linux into karmic-proposed, the package will build now and be
available in a few hours. Please test and give feedback here. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Thank you in advance!
** Tags added: verification-needed
--
thanks.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Is this ready in -proposed yet? I'll try it out if it will download and
install as a package. I don't have the time (or incination) to reroll
the kernel though.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
commit 5218e855654232269567d79af9e3be155e92e2ef in 2.6.31.7
Author: Oliver Neukum oli...@neukum.org
Date: Fri Nov 27 15:17:59 2009 +0100
USB: work around for EHCI with quirky periodic schedules
** Changed in: linux (Ubuntu Karmic)
Status: Triaged = Fix Committed
--
regression:
As it is contained in 2.6.31.7 it is supposedly fix-released in Lucid by
now.
** Changed in: linux (Ubuntu)
Status: Confirmed = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
A quick look into karmic git showed that the kernel was upgraded to
2.31.9 some hours ago, but right now this didn't appear on karmic
changes yet. Please keep us informed here when a new kernel is available
on karmic-proposed. Thanks for fixing it.
By the way, Bug 494633 (karmic kernel update request, fix of comment
#202 included) took up this issue. An update to 2.6.31.7 kernel is still
open, hopefully that should require not too much time anymore.
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam
** Changed in: ubuntu-release-notes
Status: Fix Released = Fix Committed
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
https://bugs.launchpad.net/bugs/435352
You received this bug notification because you are a
This bug task is for the Ubuntu release notes, which obviously do
include the information in question. Please don't change this status.
** Changed in: ubuntu-release-notes
Status: Fix Committed = Fix Released
--
regression: uvcvideo module makes cannot reset port error on usb with bison
People, i have a question. I haven't looked at the Ubuntu Release Notes BEFORE
upgrading to Karmic. I'm a doctor and my netbook will be a very important tool
on my lectures on february. My question is, do I install Jaunty again? Is there
any chance that this patch will be implemented before
1 - 100 of 349 matches
Mail list logo
