*** This bug is a duplicate of bug 410984 ***
https://bugs.launchpad.net/bugs/410984
** Changed in: ubuntu
Status: New = Incomplete
** This bug has been marked a duplicate of bug 410984
Regression: HP hdx 9300 often hangs on boot with acpi enabled
* You can subscribe to bug 410984
I am running a 64-bit system and never seen any significant problems
until upgrading to 9.10.
I ran a 64-bit Gentoo installation on this machine for 18 months and
except for minor issues (e.g. sound or wifi) I never had any problems(I
recall trying one of the Gentoo 2.6.30 kernels, but never used
Over the last week or so, I have seen a slight change in boot behaviour
- removing the quiet parameter no longer makes much difference. It now
seems to take 2 or 3 boots without the quiet parameter, with the
system hanging on the first 1 or 2 attempts, then booting successfully.
I have tried
Are you using a x86 or x86_64 system? My hp hdx 9300 system boots only
on x86 without any hanging.
--
hp hdx-9120ea hangs at boot after upgrade to karmic
https://bugs.launchpad.net/bugs/470597
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
In an effort to get my system booting, I thought I would try updating
the kernel. I hunted around for a bit, then decided to check for
proposed updates via KPackageKit, which showed linux-
image-2.6.31-15-generic was available, so I installed it.
I rebooted and for a laugh tried the original
This may very well be related (possibly even a duplicate) to
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/410984 as I have
tried booting by adding the acpi=off and the system boots with the quiet
parameter. However, in my case the system fails to boot at all unless I
remove the quiet
