Removing Dapper target. Is tis still an n-m bug in Gutsy? If so please
re-open and set to 'Incomplete'. Thanks.
** Changed in: network-manager (Ubuntu)
Target: dapper-updates => None
--
rt2500 wireless adapter unable to obtain IP address
https://bugs.launchpad.net/bugs/49392
You received
Now network-manager refuses to start up. This started happening after
the latest kernel update, but could be a case of post hoc reasoning.
According to strace output (which I'll attach), it constantly polls some
file descriptor (14, in this case), which always returns "EAGAIN".
--
rt2500 wirele
Changing to network-manager as requested.
** Changed in: linux-source-2.6.15 (Ubuntu)
Sourcepackagename: linux-source-2.6.15 => network-manager
--
rt2500 wireless adapter unable to obtain IP address
https://launchpad.net/bugs/49392
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
If you have a look on this bug as well, including the same driver.. I
also didn't manage to get a IP through dhcp and it didn't even find
the access point.. For some strange reason, some channels doesn't work
undner Dapper... But thay work under windows...
https://launchpad.net/distros/ubuntu/
Ok, so this is something with Network-Manager, or other part. Rejecting
the linux-source portion of this bug. If you find out what other part
causes this, add that component to the bug (don't open a new bug as that
neglects the history so far).
** Changed in: linux-source-2.6.15 (Ubuntu)
St
Success.
I was able to obtain an IP address for my wireless card (using stock
rt2500 driver in the latest kernel) by adding
wireless-essid rtswireless
wireless-key
to /etc/network/interfaces
All previous attempts were using the ASCII key.
So, the bugs are now:
- Why doesn't ASCII key work?
-
I'm not so sure this is an rt2500 driver problem anymore. I found an
old cvs tarball that I had used successfully under Breezy, compiled and
installed it, and I still can't get an IP address for my wireless
device. Perhaps the problem is elsewhere?
--
rt2500 wireless adapter unable to obtain IP
The latest kernel did not help; in fact, it seems to have made things
slightly worse... now the nm-applet won't let me configure wireless at
all (though command-line tools like ifup, iwconfig, etc. still seem to
not work in the same way as before... hope you unserstand what I mean).
--
rt2500 wir
Please test the latest kernel in dapper-security. Likely it wont help
you, but atleast you'll be using the latest CVS built properly.
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Fix Committed => Confirmed
--
rt2500 wireless adapter unable to obtain IP address
https://launchpad.net
> Does it help when setting the channel and/or the AP address through
iwconfig?
Nope, no difference.
--
rt2500 wireless adapter unable to obtain IP address
https://launchpad.net/bugs/49392
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu
Does it help when setting the channel and/or the AP address through
iwconfig?
--
rt2500 wireless adapter unable to obtain IP address
https://launchpad.net/bugs/49392
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
$ iwlist ra0 scan
ra0 Scan completed :
Cell 01 - Address: 00:11:50:D1:25:D4
Mode:Managed
ESSID:"Garlett"
Encryption key:off
Channel:1
Quality:0/100 Signal level:-70 dBm Noise level:
ok, the iwconfig output does not indicate the BSSID of the AP. This
means you are not associated.
Does iwlist ra0 scan report anything?
--
rt2500 wireless adapter unable to obtain IP address
https://launchpad.net/bugs/49392
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.
> Also does iwconfig indicate you have started a successfull
association?
I don't know how to answer that. Here is the output from iwconfig ra0:
ra0 RT2500 Wireless ESSID:"rtswireless"
Mode:Managed Frequency=2.412 GHz Bit Rate:11 Mb/s Tx-Power:0 dBm
RTS thr:off
Unfortunately you don't seem to have debug enabled in rt2500. This makes
the logs not really usefull. Please read the instructions in the TESTING
file about obtaining debug information.
Also does iwconfig indicate you have started a successfull association?
--
rt2500 wireless adapter unable to o
15 matches
Mail list logo
