I did a few tests on a WPA2 router:
Results:
2.6.36rc8 64bit self-compiled ralink: works (this is the only driver that can
also do ad hoc mode with good speed)
64 bit live:
rt2800pci: wlan unavailable (syslog shows an error loading firmware ...PBF)
rt2860sta works; connects immediately
I can confirm this bug for Maverick on eeepc 1000H. Workaround from
Bruno (#14, thanks!) works perfectly.
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured wireless networks)
https://bugs.launchpad.net/bugs/594866
You received this bug notification
Unfortunately Bruno's fix did not work for me. I have an MSI CR700
laptop. I played around with blacklisting and un-blacklisting the
modules Bruno mentioned but it seems my system requires rt2800pci. If I
blacklist rt2800pci then the system shuts down properly but I cannot
connect to a WPA2
Chris, may I suggest you file a new report for your shut down issue. It
is a symptom that was not reported by the original reporter and we
should anyway really try to start separating the many interesting ways
those drivers fail.
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken
Wolfgang, I would be happy to submit a new report but I wouldn't know
where to start and as I'm not very technically minded I don't know if
I'd be able to help much in solving the problem. I can follow
instructions but wouldn't know where to start resolving an error such as
this.
--
Just open a terminal (ApplicationsAccessoriesTerminal) and type
ubuntu-bug linux . It should do all the rest. It will collect relevant
information. You do not have to do anything else.
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured wireless
Wolfgang, I have submitted the new bug as you requested, hopefully I
have done it correctly. Some of the questions Ubuntu threw up weren't
exactly easy to understand for a newbie like me so I took my best guess.
Hopefully this will be of help to others as well.
It can be found here:
Thanks Bruno (#14). This worked for me with 10.10 on an Eeepc 1001HA.
Everything had worked well with Lucid UNE but on installing Maverick I
had limited network connectivity and couldn't shutdown, hibernate or
suspend without freezing. Any attempts to disable networking also
caused the machine
I've installed the ubuntu 10.10 final release, and I can confirm that this bug
still happening.
The Bruno's solution help me to get on line using my wireless / wpa,
however this workaround sometimes crash my network interface.
uname -a
Linux HP-TouchSmart 2.6.35-22-generic #34-Ubuntu SMP Sun
@Bruno #14 -- That workaround works for me. I'm running the Maverick
beta with kernel 2.6.35-22-generic on an MSI GT 735 with an RT2860.
Before the fix I was unable to connect to my WPA2 network.
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured
@Bruno #14 -- thanks for that, works like a charm on my MSI U230 (Ralink
RT3090) running Maverick and kernels 2.6.35-22-generic and
2.6.35-19-generic.
-19 throws a load of PBF system register not ready errors in dmesg,
-22 doesn't seem to do that but won't associate with the access point.
After
I just booted in 2.6.32-25-generic and see instant improvement.
None of the problem seen in 2.6.35-21-generic or 2.6.35-20-generic are present.
I did however notice the following error while booting
2.6.35-21-generic:
[ 35.357754] phy0 - rt2800pci_mcu_status: Error - MCU request failed,
no
@Bruno: Many thanks for this **Workaround**
It works for me too.
I hope that a final solution will be found before Maverick release :)
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured wireless networks)
https://bugs.launchpad.net/bugs/594866
You
Workaround did not work for me. But I kept the blacklisted modules
blacklisted. After the kernel upgrade to 2.6.35-21-generic the ndiswrapper
solution seems to work again.
Regards,
Charles
2010/9/15 Matthieu Baerts matt...@gmail.com
@Bruno: Many thanks for this **Workaround**
It works for me
I can confirm problems with RT2860 in the 2.6.35-21-generic too.
I've had problem like it ever since Ubuntu 10.04 related to the kernel. (Bug
filed)
I have been running on a RC kernel which seemed to fix any problems.
Previously I had problems connecting to WPA2 Personal and possibly others too.
I tried something more in the KISS idea today: download the daily-live
amd64 and did this:
ifconfig wlan0 down
lsmod | grep rt
rmmod rt2800pci
rmmod rt2860sta
rmmod rt2800lib
rmmod rt2x00usb
rmmod rt2x00pci
rmmod rt2x00lib
modprobe rt2860sta
ifconfig wlan0 up
and then I could connect to my WPA
adding:
blacklist rt2800pci
blacklist rt2800lib
blacklist rt2x00usb
blacklist rt2x00pci
blacklist rt2x00lib
to /etc/modprobe.d/blacklist.conf, than reboot. This works for me.
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured wireless networks)
After reading your last comment I tried the 2.4.0.0 driver you mention. It
works well as a client in an ad hoc WEP network while the stock maverick
rt2860sta always fails. (Both fail as clients in an ad hoc WPA network, but
that has never ever worked.)
I have not yet tried infrastructure mode,
Hello,
I still have the same problem with the latest linux version (available
on Maverick repositories)
After having mounted my Ralink Wireless card from another kernel, this is what
I have (it still the same I think)
[ 103.143058] phy0 - rt2x00pci_regbusy_read: Error - Indirect register
Maybe it can help you:
# lspci -vv
0a:00.0 Network controller: RaLink RT2860
Subsystem: RaLink Device 2790
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort-
Just to note that there is a new version of Ralink drivers on their
website (v. 2.4.0.0) = http://eng.ralinktech.com.tw/support.php?s=2
But I don't know if it can help... This is the release note:
[2.4.0.0]
1. Fix Adhoc issue.
2. Fix issue: Correct RSSI, SNR, Noise calculation
3. Fix
Hello,
I confirm that this problem is not fixed with the version 2.6.35-10. So I'm no
longer able to enable my Ralink Wireless card if it's not activated at startup.
And after having enabled it from an older kernel version and reboot the
computer, it fails to connect to secured wireless
Hello,
Just to say that I have the same problem with the version 2.6.35-7: this
version of the kernel can't enable my Ralink wireless card and after having
enable it with an older version and reboot the computer, it fails to connect to
secured wireless networks:
[ 118.573082] phy0 -
After having compiled the latest version of Ralink drivers (version 2.3.0.0 =
http://eng.ralinktech.com.tw/support.php?s=2 ) I still have the problem.
I join the output of 'dmesg'.
Thank you for your help!
** Attachment added: dmesg.txt
http://launchpadlibrarian.net/51770489/dmesg.txt
--
** Changed in: linux (Ubuntu)
Status: Incomplete = Triaged
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured wireless networks)
https://bugs.launchpad.net/bugs/594866
You received this bug notification because you are a member of Ubuntu
Hi Matthieu,
If you could also please test the latest upstream kernel available that would
be great. It will allow additional upstream developers to examine the issue.
Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the
upstream kernel, please remove the
I confirm, it doesn't work with the latest daily build.
Firstly, I can't enable the WiFi card:
[ 124.570044] phy1 - rt2800pci_load_firmware: Error - PBF system register
not ready.
[ 124.570565] phy1 - rt2x00pci_regbusy_read: Error - Indirect register
access failed: offset=0x7010,
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/50399084/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/50399085/AplayDevices.txt
** Attachment added: ArecordDevices.txt
http://launchpadlibrarian.net/50399087/ArecordDevices.txt
** Attachment added: Part of the lspci -vnvn output
http://launchpadlibrarian.net/50401119/lspci_-vnvn
--
[Maverick][2.6.35] RT2860 (ralink) support seems to be broken (it fails to
connect to secured wireless networks)
https://bugs.launchpad.net/bugs/594866
You received this bug
I forget to say that it worked fine before (= 2.6.31).
And also I don't know if it's related but now if I shutdown (not reboot) the
computer and restart it later, it seems that this wireless card is disabled and
I can't enable it with:
$ sudo ifconfig wlan0 up
The output says that the device
30 matches
Mail list logo
