Public bug reported: Binary package hint: laptop-mode-tools
I can't change mine though with the help of laptop-mode-tools.. i was able stop it spinning all the time but it still averages around 50 degree!!!!! I know its hot. this is what i get after run the acoustic command Its a bug which needs to fixed before my HDD get fired! [code] ~$ sudo hdparm -M 128 /dev/sda /dev/sda: setting acoustic management to 128 HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error HDIO_DRIVE_CMD(identify) failed: Input/output error ~$ [/code]This the info on it Note I have two physic HD [code] ba...@bahie-laptop:~$ sudo hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: TOSHIBA MK4058GSX Serial Number: Y8UBP1H0T Firmware Revision: FF011M Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6 Standards: Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 781422768 Logical Sector size: 512 bytes Physical Sector size: 512 bytes device size with M = 1024*1024: 381554 MBytes device size with M = 1000*1000: 400088 MBytes (400 GB) cache/buffer size = 8192 KBytes Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 254 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set SET_MAX security extension * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * Idle-Unload when NCQ is active * DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 166min for SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 5000039162685611 NAA : 5 IEEE OUI : 000039 Unique ID : 162685611 Checksum: correct ba...@bahie-laptop:~$ sudo hdparm -I /dev/sdb /dev/sdb: ATA device, with non-removable media Model Number: TOSHIBA MK3252GSX Serial Number: Y8I9COUQT Firmware Revision: LV010M Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6 Standards: Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 625142448 Logical Sector size: 512 bytes Physical Sector size: 512 bytes device size with M = 1024*1024: 305245 MBytes device size with M = 1000*1000: 320072 MBytes (320 GB) cache/buffer size = 8192 KBytes Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 254 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set SET_MAX security extension * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * Gen1 signaling speed (1.5Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * Idle-Unload when NCQ is active * DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 130min for SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50000391637048df NAA : 5 IEEE OUI : 000039 Unique ID : 1637048df Checksum: correct [/code] ** Affects: laptop-mode-tools (Ubuntu) Importance: Undecided Status: New -- Hot HDD on Idle https://bugs.launchpad.net/bugs/668634 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs