Yes, I can confirm this is working in mythbuntu 11.10 which has Kernel
3.0
Thanks for all your help
Dhabud
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc not working correctly
Thanks, i'll mark this bug fix released.
** Changed in: lirc (Ubuntu)
Status: Confirmed = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc not working correctly
Jarod
Can we expect this to be fixed in mythbuntu oneric. 11.10. Let me know
if I can help testing it. I know couple of people have reported a fix
here but also note that they had to generate lircd.conf file with new
HEX codes.
Dhabud
--
You received this bug notification because you are a
No clue. I don't use *buntu at all, let alone follow its development
releases. The bug I had in mind was fixed in kernel 3.0 though.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc
Kernel 3.0 is included in oneiric, so if it's fixed there, yes it should
be fixed for oneiric.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc not working correctly on 2.6.38
** Changed in: lirc (Ubuntu)
Status: New = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc not working correctly on 2.6.38 kernel
To manage notifications about
In reply to comment #6, you're doing it wrong. On multiple levels. You
are trying to use devinput, but the mceusb driver hasn't been configured
to use the hauppauge rc5 keymap. Then you're trying to use a raw IR
config with that. Won't work. You need to use /dev/lirc0 for a raw IR
config. For
Working hardware.conf file
** Attachment added: working hardware.conf file using /dev/input/event# and
devinput driver
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/778296/+attachment/2223867/+files/WORKING_hardware.conf
--
You received this bug notification because you are a member
This bug also affects my system. Everything was working fine with 10.10;
fails with upgrade to 11.04. I'm using a Philips (or NXP) eHome Infrared
Receiver with a Hauppauge RC5 remote.
The short story is that I had to use the devinput driver,
/dev/input/event# device and a new lircd.conf file.
lircd.conf file using RC5 codes and /dev/lirc0 working prior to 11.11
** Attachment added: lircd.conf file using RC5 codes and /dev/lirc0 working
prior to 11.11
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/778296/+attachment/2223868/+files/FAILS_original_RC5_dev-lirc0_lircd.conf
--
lircd.conf file using raw codes and /dev/lirc0 75% working on 11.11
** Attachment added: lircd.conf file using raw codes and /dev/lirc0 75%
working on 11.11
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/778296/+attachment/2223869/+files/FAILS_RAW_dev-lirc0_lircd.conf
--
You received
wrt comment #13, there's a bug in the mceusb driver that affects some IR
signals, which was fixed in kernel 3.0 with the stable tree cc'd. I
believe it should end up in 2.6.39 stable, dunno if 2.6.38 stable is
actually being maintained anymore, so no clue if ubuntu will ever get
the fix before its
Similar Issue reported by someone else
http://sourceforge.net/mailarchive/message.php?msg_id=27361651
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc not working correctly on
There are two perfectly valid ways to use the mceusb driver, one is via
the default lirc driver and /dev/lirc0, the other is using devinput
and the mceusb device's input layer event device (or better, its symlink
in /dev/input/by-id/). The current problem with trying to use devinput
mode is that
OP: Note also though: devinput mode with the windows media center rc-6
keymap loaded isn't going to work at all with a TiVo remote. You need to
either load a tivo keymap (which I don't think exists until kernel
2.6.39 or .40), or just use the /dev/lirc0 method with the TiVo
lircd.conf you were
Ok I understand Tivo remote to be different beast. So I am trying to
get hauppauge remote to get working.
I upgraded to 2.6.39 rc5 kernel and still dont see any output on irw. I
change protocol to rc-5 for hauppauge remote using following ir-keytable
-p RC-5. or echo rc-5
More details
dmesg | grep lirc
[ 22.960349] lirc_dev: IR Remote Control driver registered, major 250
[ 23.080886] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at
minor = 0
# dmesg | grep mceusb
[ 22.920370] mceusb 3-1:1.0: Registered Philips eHome Infrared Transceiver on
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/778296
Title:
lirc not working correctly on 2.6.38 kernel
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
It sounds like you have your remote device misconfigured.
It should not be using devinput, but rather native lirc. I actually
have the below config working properly on natty. After you set it,
restart the lirc init script.
#Chosen Remote Control
REMOTE=Windows Media Center
This is what I had in in 10.10 and it worked but same thing did not work
on 11.04. See the Jarod Wilsons blog + other people reporting similar
behavior
http://wilsonet.com/?page_id=95
http://web.archiveorange.com/archive/v/Xn95HLWfmE27Kif1dgkq
http://ubuntuforums.org/showthread.php?p=10712446
20 matches
Mail list logo
