Not yet, but the good news is it's coming soon:
https://wiki.gnome.org/ThreePointThirtyseven
And should be in Ubuntu 20.10 soon after that.
Also note your log is still mentioning errors from:
/home/carlos/.local/share/gnome-shell/extensions/clipboard-
indica...@tudmotu.com/...
The simplest
The issue is that http://start.ubuntu.com/connectivity-check.html
returns a 404. I'll chase why.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890392
Title:
xubuntu 20.04.1 qa-test install, unable
*** This bug is a duplicate of bug 1611737 ***
https://bugs.launchpad.net/bugs/1611737
** This bug has been marked a duplicate of bug 1611737
Can't upgrade from a release if ros packages are installed from ROS servers
--
You received this bug notification because you are a member of Ubun
I'm watching this error since about 10 months hoping that this would be fixed
before the 20.04 release.
Now we're almost 4 months past the release date and it's still there.
Given that the fix is quite easy, I'm wondering why this is still an unresolved
issue.
--
You received this bug notificat
I can't find it in libvirt 6.6 even - unless there were massive renames
this didn't land upstream yet. Please let us know if it already did or
if there is anew schedule/plan to get it landed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
> For me, only GNOME 3.38 (prerelease) is close to smooth at 4K.
Is there a reasonably simple way to test this in Ubuntu? Or maybe I
could look for a package in the AUR.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.lau
Opened corresponding PRs on github.
1. subiquity - https://github.com/CanonicalLtd/subiquity/pull/810
2. probert - https://github.com/canonical/probert/pull/93
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net
> 1. Reboot, make sure you still see stuttering and then run these
commands:
Done
> 2. Completely uninstall these extensions:
They weren't installed in fact, just remaining configurations of old
installations. I've removed every reference to them from my settings
now.
> 3. Disable 'Ubuntu AppI
Quick update on my encounter with this issue in 18.04 against an
(ancient!) 2007 iMac... after updating "intel-microcode" to version
3.20200609 (which wasn't yet available when this was reported), I am no
longer able to repro the issue. All packages are up-to-date (for 18.04
anyway), and the system
> Grub had somehow been changed to disable ACPI. Enabling that solved the
problem.
Imagine how great it would have been if you had mentioned how did
exactly you did that (enabling ACPI in grub)?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
> Also remember to update your system because it appears to be out of
date...
Strange cause I manually run the GUI updater on a daily basis. But it's
showing no update while I get 7 upgradeable packages from the CLI. Done,
just small things, no difference.
--
You received this bug notification b
** Changed in: firefox
Status: In Progress => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889784
Title:
Hardware-accelerated video decoding (VA-API) broken in Firefox 79
(Wa
Yes i restarted isc-dhcp-server with systemctl restart isc-dhcp-server (
even tried a reboot once)
# dpkg -l | grep ppa1
ii isc-dhcp-server 4.4.1-2.1ubuntu6~ppa1
amd64ISC DHCP server for automatic IP address assignment
ii libdns-export1109
** Attachment added: "lspcik.txt"
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1890533/+attachment/5399149/+files/lspcik.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890533
Tit
** Attachment added: "journal.txt"
https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1890533/+attachment/5399150/+files/journal.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890533
T
Launchpad has imported 7 comments from the remote bug at
https://sourceware.org/bugzilla/show_bug.cgi?id=20338.
If you reply to an imported comment from within Launchpad, your comment
will be sent to the remote bug automatically. Read more about
Launchpad's inter-bugtracker facilities at
https://h
Not tracking as this is still disabled.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889784
Title:
Hardware-accelerated video decoding (VA-API) broken in Firefox 79
(Wayland)
To manage notifica
Since the status are different for nightly and release, what's the status for
beta?
For more information, please visit [auto_nag
documentation](https://wiki.mozilla.org/Release_Management/autonag#missing_beta_status.py).
--
You received this bug notification because you are a member of Ubuntu
B
[Tracking Requested - why for this release]:
This regression affects:
* MOZ_ENABLE_WAYLAND=1 users with Firefox 79,
* MOZ_X11_EGL=1 and MOZ_ENABLE_WAYLAND=1 users with Firefox 80.
Everyone is excited that Firefox 80 finally supports VAAPI hardware
decoding on X11, it got news coverage, etc., but
** Changed in: ark (Ubuntu Focal)
Assignee: (unassigned) => Steve Beattie (sbeattie)
--
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to ark in Ubuntu.
https://bugs.launchpad.net/bugs/1889672
Title:
KDE Project Security Advisory: Ark: mal
https://hg.mozilla.org/mozilla-central/rev/bacacb384008
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889784
Title:
Hardware-accelerated video decoding (VA-API) broken in Firefox 79
(Wayland)
To
Also remember to update your system because it appears to be out of
date...
sudo apt update
sudo apt full-upgrade
Reboot
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890533
Title:
Overview
Yes, find the new packages' names:
dpkg -l | grep 5.8.0-050800
and then purge them:
sudo dpkg -P ...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890418
Title:
i915 does not expose vendor-s
Pushed by abutkov...@mozilla.com:
https://hg.mozilla.org/integration/autoland/rev/bacacb384008
[Linux/VA-API] Create DMABufSurfaceWrapper directly at nsTAttay and disable
DMABufSurfaceWrapper class copy and assignment constructors, r=jya
--
You received this bug notification because you are a me
Public bug reported:
Unable to upgrade from Ubuntu 16.04 LTS to 18.04.4 LTS.
The following error is given:
"
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade.
If none of this applies, then please report this bug using the command
'ubuntu-bug ubunt
Attaching original screenshots:
gnomeTerminalMaximiseBugScreenshot1-afterLScommand.png
gnomeTerminalMaximiseBugScreenshot2-afterMaximize.png
** Attachment added: "gnomeTerminalMaximiseBugScreenshots.png"
https://bugs.launchpad.net/ubuntu/+source/gnome-terminal/+bug/1890382/+attachment/5399148/
Although I would not be surprised if those don't work adequately. For
me, only GNOME 3.38 (prerelease) is close to smooth at 4K. Although 3.36
is at least usable with the MESA_LOADER_DRIVER_OVERRIDE=i965 workaround.
--
You received this bug notification because you are a member of Ubuntu
Bugs, wh
I have encountered a seemingly related issue where ls is sometimes
displaying different output depending on the terminal display size (and
when the function is called), independent of maximisation.
** Attachment added: "gnomeTerminalDisplayBugScreenshot.png"
https://bugs.launchpad.net/ubuntu/+
*** This bug is a duplicate of bug 1889556 ***
https://bugs.launchpad.net/bugs/1889556
> 1. How can I boot the system from within the Grub rescue prompt? I
don‘t have a live System and can‘t get hands on one for several days.
You can't. The part of grub that loaded from the MBR (and printed '
Hello Seth, or anyone else affected,
Accepted rtl8821ce into focal-proposed. The package will build now and
be available at
https://launchpad.net/ubuntu/+source/rtl8821ce/5.5.2.1-0ubuntu4~20.04.2
in a few hours, and then in the -proposed repository.
Please help us by testing this new package. Se
Hello Théo, or anyone else affected,
Accepted rtl8821ce into focal-proposed. The package will build now and
be available at
https://launchpad.net/ubuntu/+source/rtl8821ce/5.5.2.1-0ubuntu4~20.04.2
in a few hours, and then in the -proposed repository.
Please help us by testing this new package. Se
Please try these. You can stop at any step if the problem goes away...
1. Reboot, make sure you still see stuttering and then run these
commands:
lspci -k > lspcik.txt
journalctl -b0 > journal.txt
and attach the resulting text files here.
2. Completely uninstall these extensions:
c
** Also affects: nova (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: nova (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890428
Title:
format_message() is speci
Daniel I successfully ran the dpkg process as you illustrated but it
then failed to boot, so now I must manually selected the 5.4 version in
order to get to this boot. Is there a way to reverse that?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribe
** Changed in: libreoffice (Ubuntu)
Importance: Undecided => Low
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1888504
Title:
Two-finger touchpad scroll broken
To manage notifications about this
Public bug reported:
This bug is already solved upstream
(https://sourceware.org/bugzilla/show_bug.cgi?id=20338) in 2.32 and has
to be backported.
It indirectly causes systemd-sysusers on 20.04/focal to fail
(https://github.com/systemd/systemd/issues/6512).
** Affects: glibc
Importance: Unk
a better way is: add the mapping for CAN to _compute_type() in
probert/network.py as well as add 'can' and '???' to
NETDEV_IGNORED_IFACE_TYPES in subiquity/subiquitycore/models/network.py
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Also affects: subiquity (Ubuntu)
Importance: Undecided
Status: New
** Also affects: probert (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: virtualbox (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1884652
Title:
Hi, also fails on 5.8.0-12-generic Groovy proposed with secure boot and
TPM. I think it's mostly a similar make.log. Do you want me to add a bug
report?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/18
** Changed in: mate-settings-daemon (Ubuntu)
Importance: Undecided => Wishlist
** Changed in: mate-settings-daemon (Ubuntu)
Status: New => Triaged
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bu
** Description changed:
This was first described upstream in https://gitlab.gnome.org/GNOME
/gnome-shell/-/issues/2697
I'm reporting it here as requested in https://discourse.ubuntu.com/t
/gnome-shell-performance-improvements-in-
ubuntu-20-04/15972/38?u=memeplex
+
+ Please don't be m
*** This bug is a duplicate of bug 1889556 ***
https://bugs.launchpad.net/bugs/1889556
Dear all,
I‘m affected, too, on my Lenovo laptop running Kubuntu 18.04. I have two
questions:
1. How can I boot the system from within the Grub rescue prompt? I don‘t
have a live System and can‘t get hands
To test kernel 5.8 you need to download all these packages EXCEPT the
"lowlatency" ones:
https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.8/amd64/
and then install them all at once:
sudo dpkg -i *.deb
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
The attachment in comment #10 confirms the problem is happening at a low
level in the kernel. Although Xorg could override that if it was smart
enough. In theory you can do it manually but would need to become an
expert at crafting modeline entries to get it working. I don't know how
myself. If tha
This bug is missing log files that will aid in diagnosing the problem.
While running an Ubuntu kernel (not a mainline or third-party kernel)
please enter the following command in a terminal window:
apport-collect 1890418
and then change the status of the bug to 'Confirmed'.
If, due to the nature
Public bug reported:
This was first described upstream in https://gitlab.gnome.org/GNOME
/gnome-shell/-/issues/2697
I'm reporting it here as requested in https://discourse.ubuntu.com/t
/gnome-shell-performance-improvements-in-
ubuntu-20-04/15972/38?u=memeplex
ProblemType: Bug
DistroRelease: Ubun
FYI - someone tried upstream, but it wasn't merged
https://github.com/ipmitool/ipmitool/issues/13
This effort would need to be re-started and driven to completion.
** Bug watch added: github.com/ipmitool/ipmitool/issues #13
https://github.com/ipmitool/ipmitool/issues/13
--
You received this
any updates on this bug? we still have problems and it makes the fs
unusable.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1868325
Title:
NILFS2 kernal crashes from normal use
To manage notificati
The expected four packages for use case II show up in component
mismatches after the seed change:
python-configshell-fb: python3-configshell-fb
MIR: #1854362 (In Progress)
[Reverse-Depends: targetcli-fb (Uploader: rafaeldtinoco)]
python-rtslib-fb: python3-rtslib-fb
MIR: #1854362 (In Progress)
[Rev
I found the information, at section 3.4 of the manual
https://dlcdnets.asus.com/pub/ASUS/LCD%20Monitors/PB287/PB287Q_English.pdf
where VESA / IBM Modes Support Timing (DP/HDMI) reaches 4k but CEA-861
Formats Supported Timing (HDMI/MHL) only reach 1920
--
You received this bug notification because
Regarding HDMI version the spec which I gave a link to claims;
True Resolution : 3840x2160 at 60Hz (DisplayPort) ,3840x2160 at 30Hz (HDMI)
Some while ago I was researching this issue and found a specification
page on the ASUS website which showed two formats for declaring the
frame rate, one exte
I've experienced this twice today with daily images of Lubuntu bionic
daily (i386); full disk & install-alongside
** Tags added: i386
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890392
Title:
xu
Could you try set "optimized" = "enable" or "disable", then load default
setting?
Meantime I will try find one to reproduce.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890415
Title:
Lenovo Thin
Thanks for your work
I just bought and tried a new 4K hdmi cable, with no change. I noticed
that the monitor has TWO inputs, HDMI and HDMI/MHL (it had been plugged
into HDMI) but switching this to HDMI/MHL gave no result.
I am using MATE but the same issue occurs in several flavours of Ubuntu
tha
Thanks for reporting this.
@paelzer, it looks like ipxe can't be treated as "Architecture: All" any
longer, and that debian/control will have to have src/bin-arm64-efi and
some decisions based in $(dpkg-architecture -qDEB_HOST_ARCH)==arm64.
** Changed in: ipxe (Ubuntu)
Status: New => Conf
In an arm64 groovy container I got an easy to fix Werror:
include/ipxe/uri.h:178:12: error: taking address of packed member of
‘struct uri’ may result in an unaligned pointer value [-Werror=address-
of-packed-member]
for groovy source code. I believe this "fix" (arm64 support) shall be
easy.
--
This change was made by a bot.
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890507
Title:
touchad not working
To manage notification
Let me know if you want me to handle, please.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890230
Title:
arm64 ipxe package isn't an arm64 built
To manage notifications about this bug go to:
http
Please open your own new bug by running:
ubuntu-bug gnome-shell
This bug should stay closed.
** Changed in: nvidia-graphics-drivers-390 (Ubuntu)
Status: Opinion => Invalid
** Changed in: xorg-server (Ubuntu)
Status: Opinion => Invalid
** Changed in: nvidia-graphics-drivers-390
** Package changed: ubuntu => linux (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890507
Title:
touchad not working
To manage notifications about this bug go to:
https://bugs.launchpad.ne
I'm too affected, please review.
Thanks
** Changed in: nvidia-graphics-drivers-390 (Ubuntu)
Status: Expired => Opinion
** Changed in: xorg-server (Ubuntu)
Status: Expired => Opinion
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Changed in: ipxe (Ubuntu)
Assignee: Rafael David Tinoco (rafaeldtinoco) => (unassigned)
** Changed in: ipxe (Ubuntu Focal)
Assignee: Rafael David Tinoco (rafaeldtinoco) => (unassigned)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
> I mean that xorg is working and using 50%of the cou without
purpose.When I have just close fire fox.
When this happens please:
1. Run 'top' and check if any other processes are using more than 10%
CPU.
2. Look carefully at your screen and tell us if any part is constantly
changing, like any pe
This might have been fixed in the Intel graphics driver in a newer
kernel. Can you please test this one?
https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.8/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
Actually the problem might just be that the Linux kernel doesn't
understand extended vendor-specific display timings. I've decoded your
monitor's EDID and it reveals that 3840x2160 30Hz is mentioned:
edid-decode (hex):
00 ff ff ff ff ff ff 00 04 69 a3 28 24 51 00 00
0e 1b 01 03 80 3e 22 78 3a 1c
Please also run this command:
grep . /sys/class/drm/*/modes > kernel-modes.txt
and attach the resulting text file here.
** Changed in: linux (Ubuntu)
Status: New => Incomplete
** Changed in: xorg-server (Ubuntu)
Status: New => Incomplete
--
You received this bug notification b
** Summary changed:
- xubuntu 20.04.1 qa-test install, unable to select download-updates; locate is
not detected
+ xubuntu 20.04.1 qa-test install, unable to select download-updates; location
is not detected
--
You received this bug notification because you are a member of Ubuntu
Bugs, which i
Thanks. The file xrandr.txt indeed shows the HDMI connection is limited
to 1920x1080. It also shows that's the "current" mode but it lists no
"preferred" mode, which does support the idea that the monitor can do
higher resolution...
The manufacturer's specs mention that 4K is limited to 30Hz over
** Changed in: spamassassin (Ubuntu Focal)
Status: Triaged => Fix Released
** Changed in: spamassassin (Ubuntu)
Status: Triaged => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
This bug has been reported on the Ubuntu ISO testing tracker.
A list of all reports related to this bug can be found here:
http://iso.qa.ubuntu.com/qatracker/reports/bugs/1890515
** Tags added: iso-testing
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
According to apport logs you had mysql-server installed at:
Start-Date: 2020-08-01 09:13:37
Commandline: apt install mysql-server-core-8.0
Requested-By: manuel (1000)
Install: ...
And 2 days later you installed mysql-client-core:
Start-Date: 2020-08-03 09:24:59
Commandline: apt install mysql-c
Thank you for taking the time to file a bug report.
Since it seems likely to me that this is a local configuration problem,
rather than a bug in Ubuntu, I am marking this bug as 'Incomplete'.
However, if you believe that this is really a bug in Ubuntu, then we would
be grateful if you would provi
Still a problem in 42.2. No color-theme-* (thus no color-theme-modern
that was proposed as a replacement).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1817480
Title:
Emacs color-theme package is
** Changed in: xorg-server (Ubuntu)
Status: New => Incomplete
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890436
Title:
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: emacs-goodies-el (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1817480
Ti
The root cause of the problem [is in libseccomp
When][1]. The newer version fixes the problem, but it is not yet available in
Debian's stable repos. There are two way to fix this problem:
**Method 1**
Start the container with `--privileged`. This bypasses docker's security
measures, so it is not
Public bug reported:
I installed rygel and created a specific rygel user to run it with (as
directed by the docs). I then realized a specific user was not needed.
To reverse my steps, I ran deluser which proceeded to delete lots of
files that have nothing to do with the rygel user:
root@host:~# a
Public bug reported:
falied
ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: mysql-server-8.0 8.0.20-0ubuntu0.20.04.1
Uname: Linux 5.7.4-050704-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.4
AptOrdering:
mysql-client-8.0:amd64: Install
mysql-server-8.0:amd64: Install
mysql-server-c
Public bug reported:
journalctl output:
Aug 05 18:20:25 mhall-xps redis-server[555286]: *** FATAL CONFIG FILE ERROR ***
Aug 05 18:20:25 mhall-xps redis-server[555286]: Reading the configuration file,
at line 1352
Aug 05 18:20:25 mhall-xps redis-server[555286]: >>> 'activedefrag yes'
Aug 05 18:20
By the way, I know the BIOS is outdated (A21 instead of A24), but I
failed to update it via FreeDOS process. (The manual
https://wiki.ubuntuusers.de/BIOS_aktualisieren is partially out of date
in this point or I do something wrong, but it's a different issue
anyway, having little to do with this ve
Result of `sudo acpidump > acpi.log` attached.
As for USB issues:
1. I sometimes experience bad contact to my iPhone when I charge it
using a USB port. This seems to be a physically bad contact to me,
however, but I cannot tell for sure.
2. Another issue is that after a USB thumb drive has been
Done. Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890418
Title:
External monitor will not display to 4k
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+so
** Attachment added: "journal.txt"
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1890418/+attachment/5399092/+files/journal.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890418
Title:
** Attachment added: "xrandr.txt"
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1890418/+attachment/5399094/+files/xrandr.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890418
Title:
** Attachment added: "lspcik.txt"
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1890418/+attachment/5399093/+files/lspcik.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890418
Title:
This change was made by a bot.
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890436
Title:
VGA image is ghosted and stretched (LG L195
+:/var/crash/_usr_bin_gnome-mpv.999.crash
CurrentDesktop: LXDE
Date: Thu Aug 6 02:08:57 2020
LiveMediaBuild: Lubuntu 18.04.5 LTS "Bionic Beaver" - Release i386 (20200805)
PackageArchitecture: all
ProcEnviron:
TERM=xterm-256color
PATH=(custom, no user)
XDG_RUNTIME_DIR=
LANG=C.UTF-8
Possible duplicate. This issue I've reported before, but I cannot find
it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890515
Title:
ubuntu-bug blah.crash file gives errors that imply it wasn't
Please run this command to attach more information about the system:
apport-collect 1890418
Please also run these commands:
lspci -k > lspcik.txt
journalctl -b0 > journal.txt
xrandr --verbose > xrandr.txt
and attach the resulting text files here.
** Tags added: focal
** Changed in: m
Removing packages:
xserver-xorg-input-void 1:1.4.1-1build3 in groovy
xserver-xorg-input-void 1:1.4.1-1build3 in groovy amd64
xserver-xorg-input-void 1:1.4.1-1build3 in groovy arm64
xserver-xorg-input-void 1:1.4.1-1build3 in groovy armhf
Hi! I just want to chime in and document my workaround to use a generic
UVC webcam with a built-in mic.
I attach a screenshot showing both a "multichannel input" and
"microphone" once the UVC webcam is attached.
Notice the picklist still does not contain an item for the system built-
in [analog]
This looks like a signalling problem. There doesn't seem to be any
corruption in the image. Only the signal to the monitor doesn't
correctly match the frequencies that the monitor requires.
As a workaround please try selecting 'Ubuntu on Wayland' from the login
screen.
Please also try a different
Public bug reported:
When looking for a password to which one knows only the username,
entering the correct and full username in the "fund entries" does not
find the entry.
It appears the "username" field in the records is not looked for when
searching entries.
--
also the about box where I can
There have been no updates to the 'bluez' package since 20.04 was
released. So that can't be the problem.
Most likely it's a kernel update that caused the problem. The most recent one
was only a week or two ago. Please try downgrading (or upgrading) your kernel
version using these:
https://kerne
Thank you for taking the time to report this bug and helping to make
Ubuntu better. It sounds like some part of the system has crashed. To
help us find the cause of the crash please follow these steps:
1. Look in /var/crash for crash files and if found run:
ubuntu-bug YOURFILE.crash
Then tell
** Tags added: focal
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1715602
Title:
ubiquity-dm / Install Ubuntu - Power button/menu does nothing
To manage notifications about this bug go to:
https:/
Public bug reported:
bluetooth stopped working after recent apt updates
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: bluez 5.53-0ubuntu3
ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44
Uname: Linux 5.4.0-42-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.6
Architecture: amd64
Cas
*** This bug is a duplicate of bug 1715602 ***
https://bugs.launchpad.net/bugs/1715602
Thank you for taking the time to report this bug and helping to make
Ubuntu better. This particular bug has already been reported and is a
duplicate of bug 1715602, so it is being marked as such. Please look
*** This bug is a duplicate of bug 1849142 ***
https://bugs.launchpad.net/bugs/1849142
You may also need to log out and in again. If the problem persists then
please provide a new log by running:
journalctl -b0 > journal-again.txt
--
You received this bug notification because you are a me
1 - 100 of 405 matches
Mail list logo
